Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Floor Type Boring and Milling M-C - Hor.

          Machinelist: Floor Type Boring and Milling M/C - Hor.


          Floor Type Boring and Milling M/C - Hor.

          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. PEGARD af 11


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1210014 · Floor Type Boring and Milling M/C - Hor.

          PEGARD - af 11 - - nb -

          Technical details
          spindle diameter 110 mm︱x-travel 4000 mm︱y-travel 2000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000
            spindle diameter 110 mm
            x-travel 4000 mm
            y-travel 2000 mm
            Description :

            Stocknumber 1210014
            Type of machine Floortype Boring Machine
            Make PEGARD
            Type AF11
            Type of control Conventional
            Spindle diameter 110 mm
            X-stroke (mm) 4000
            Y-stroke (mm) 2000
            Z-stroke (mm) 300/750
            Table dimensions (mm) 1200 x 1600 mm
            Table rotation (degrees) 360
            Tool Taper Iso 50
            Speeds (Rpm) 4 - 1000





        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. SCHIESS-FRORIEP 4FB 36/22,5 CNC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02953 · Floor Type Boring and Milling M/C - Hor.

          SCHIESS-FRORIEP - 4FB 36/22,5 CNC - - 2006 -

          Technical details
          spindle diameter 225 mm︱x-travel 8000 mm︱y-travel 5600 mm︱z-travel 2100 mm︱w-axis 1400 mm︱spindle turning speed - stepless 0-650 U/min︱spindle taper ISO 60 ︱feed stepless 5 - 3000 mm/min︱rapid traverse 5 m/min︱weight of the machine ca. 150 t︱dimensions of the machine ca. 12 x 5 x 8 m︱total power requirement 120 kW︱
          Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head.
            spindle diameter 225 mm
            x-travel 8000 mm
            y-travel 5600 mm
            z-travel 2100 mm
            w-axis 1400 mm
            spindle turning speed - stepless 0-650 U/min
            spindle taper ISO 60
            feed stepless 5 - 3000 mm/min
            rapid traverse 5 m/min
            weight of the machine ca. 150 t
            dimensions of the machine ca. 12 x 5 x 8 m
            total power requirement 120 kW
            Description :
            Ram type horizontal boring machine was reconditioned and modernized in 2006,
            original yom was 1972. Control Siemens 840 C.
            Machine will come with tools and a vertical milling head.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. SCHIESS-FRORIEP 4FB 36/22,5 CNC


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12650B · Floor Type Boring and Milling M/C - Hor.

          SCHIESS-FRORIEP - 4FB 36/22,5 CNC - - 2006 -

          Technical details
          spindle diameter 225 mm︱x-travel 8000 mm︱y-travel 5600 mm︱z-travel 2100 mm︱w-axis 1400 mm︱spindle turning speed - stepless 0-650 U/min︱spindle taper ISO 60 ︱feed stepless 5 - 3000 mm/min︱rapid traverse 5 m/min︱weight of the machine ca. 150 t︱dimensions of the machine ca. 12 x 5 x 8 m︱total power requirement 120 kW︱
          Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head.
            spindle diameter 225 mm
            x-travel 8000 mm
            y-travel 5600 mm
            z-travel 2100 mm
            w-axis 1400 mm
            spindle turning speed - stepless 0-650 U/min
            spindle taper ISO 60
            feed stepless 5 - 3000 mm/min
            rapid traverse 5 m/min
            weight of the machine ca. 150 t
            dimensions of the machine ca. 12 x 5 x 8 m
            total power requirement 120 kW
            Description :
            Ram type horizontal boring machine was reconditioned and modernized in 2006,
            original yom was 1972. Control Siemens 840 C.
            Machine will come with tools and a vertical milling head.


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. WOTAN Rapid 5C


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1210057 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid 5C - - 2004 -

          Technical details
          spindle diameter 160 mm︱x-travel 10.000 mm︱y-travel 3.000 mm︱Control ︱total power requirement 120/63 spindel kW︱weight of the machine ca. 63 t︱dimensions of the machine ca. 15x3.85x7.36 m︱
          Stocknumber 1210057 Type of machine CNC Floortype boring machine Make WOTAN Type Rapid 5C Build in 2004 Type of control HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.800 Z-stroke (mm) 700 W-stroke 700 mm Tool Taper Iso 50 Speeds (Rpm) 1,25 - 1250 Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min. Total Power (KW) 120 /spindel 83 Lenght (mm) 14.500 Width (mm) 3.850 Height (mm) 7.360 Weight 62.300 kg Additional information completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530 - 4 different angular milling heads - hydrostatic spindle bearing - aerostatic guideways - coolant device - chip conveyor - oil cooler Film YouTube: https://www.youtube.com/watch?v=ks6D5rutslg
            spindle diameter 160 mm
            x-travel 10.000 mm
            y-travel 3.000 mm
            total power requirement 120/63 spindel kW
            weight of the machine ca. 63 t
            dimensions of the machine ca. 15x3.85x7.36 m
            Description :
            Stocknumber 1210057
            Type of machine CNC Floortype boring machine
            Make WOTAN
            Type Rapid 5C
            Build in 2004
            Type of control HEIDENHAIN iTNC 530
            Spindle diameter 160 mm
            X-stroke (mm) 10.000
            Y-stroke (mm) 3.800
            Z-stroke (mm) 700
            W-stroke 700 mm
            Tool Taper Iso 50
            Speeds (Rpm) 1,25 - 1250
            Feeds (mm/R) 1 - 5000 mm/min
            Rapid feeds 5 mtr/min.
            Total Power (KW) 120 /spindel 83
            Lenght (mm) 14.500
            Width (mm) 3.850
            Height (mm) 7.360
            Weight 62.300 kg


            Additional information
            completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530
            - 4 different angular milling heads
            - hydrostatic spindle bearing
            - aerostatic guideways
            - coolant device
            - chip conveyor
            - oil cooler

            Film YouTube: https://www.youtube.com/watch?v=ks6D5rutslg




        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION BMP 130 CNC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19179 · Floor Type Boring and Milling M/C - Hor.

          UNION - BMP 130 CNC - - 2003/2017 - Heidenhain TNC 430

          Technical details
          spindle diameter 130 mm︱x-travel 5000 mm︱y-travel 3000 mm︱z-axis 1000 mm︱Werkzeugaufnahme ISO 50 ︱w-axis 550 mm︱spindle turning speed range 5 - 3000 U/min︱spindle motor 60 kW︱feeds - cross 0,15-8/0,9-48 mm/U︱Vorschübe stufenlos X- und Y-Achse 2 - 2500 mm/min︱feeds Z-axis 2 - 2500 mm/min︱rapid traverse X-axis 6 m/min︱Control Heidenhain TNC 430 ︱rotary table: ︱table-size 2000 x 2000 mm︱workpiece weight 20 t︱V-axis 1200 mm︱total power requirement 96 kW︱weight of the machine ca. 58 t︱dimensions of the machine ca. 12,2 x 11 m︱
          2017/2018 completely overhauled and modernised equipped with: - CNC control Heidenhain TNC 430 - C-axis Heidenhain ROD 486C Rotary Encoder - Automatic tool clamping - Rotary table E20 - Angle heads - Siemens Electric
            spindle diameter 130 mm
            x-travel 5000 mm
            y-travel 3000 mm
            z-axis 1000 mm
            Werkzeugaufnahme ISO 50
            w-axis 550 mm
            spindle turning speed range 5 - 3000 U/min
            spindle motor 60 kW
            feeds - cross 0,15-8/0,9-48 mm/U
            Vorschübe stufenlos X- und Y-Ac. 2 - 2500 mm/min
            feeds Z-axis 2 - 2500 mm/min
            rapid traverse X-axis 6 m/min
            Control Heidenhain TNC 430
            table-size 2000 x 2000 mm
            workpiece weight 20 t
            V-axis 1200 mm
            total power requirement 96 kW
            weight of the machine ca. 58 t
            dimensions of the machine ca. 12,2 x 11 m
            Description :
            2017/2018 completely overhauled and modernised
            equipped with:
            - CNC control Heidenhain TNC 430
            - C-axis Heidenhain ROD 486C Rotary Encoder
            - Automatic tool clamping
            - Rotary table E20
            - Angle heads
            - Siemens Electric


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. DÖRRIES-SCHARMANN Heavyspeed 2


          • Schiess Moweg GmbH
          • Egerstraße 73-75
          • 41236 Mönchengladbach
          • Deutschland

          • +49 (0) 2166 61530
            +49 (0)2166 615315
          • info@schiess-moweg.de
            www.schiess-moweg.de
          #1034-04076 · Floor Type Boring and Milling M/C - Hor.

          DÖRRIES-SCHARMANN - Heavyspeed 2 - - 2002 - SIEMENS 840 D

          Technical details
          spindle diameter 160 mm︱x-travel 12000 mm︱y-travel 4000 mm︱z-axis 1000 mm︱W-axis (spindle longitudinal) 1000 mm︱V-axis 2500 mm︱B-axis (table) +/- 9999.999 mm︱dimension of the ram 400 x 420 mm︱spindle motor 63 kW︱spindle turning speed range 3 - 3000 U/min︱spindle taper ISO 50 ︱table surface area 2500 x 3000 mm︱table load 40 t︱no. of workpieces in the magazine 60 Stück︱feeds: 15/25 m/min︱total power requirement 205 kvA︱dimensions of the machine ca. m︱weight of the machine ca. t︱
          Machine equiped with CNC control SIEMENS 840 D - hydrostatic guideways - angular milling head WFK 630 with 1,5° indexing - tool changer for 60 tools - NC boring table 40 to capacity - floor plates with total area of appr. 60 m² - 2 angular plates, misc. tooling
            spindle diameter 160 mm
            x-travel 12000 mm
            y-travel 4000 mm
            z-axis 1000 mm
            W-axis (spindle longitudinal) 1000 mm
            V-axis 2500 mm
            B-axis (table) +/- 9999.999 mm
            dimension of the ram 400 x 420 mm
            spindle motor 63 kW
            spindle turning speed range 3 - 3000 U/min
            spindle taper ISO 50
            table surface area 2500 x 3000 mm
            table load 40 t
            no. of workpieces in the magazin. 60 Stück
            feeds: 15/25 m/min
            total power requirement 205 kvA
            Description :
            Machine equiped with CNC control SIEMENS 840 D
            - hydrostatic guideways
            - angular milling head WFK 630 with 1,5° indexing
            - tool changer for 60 tools
            - NC boring table 40 to capacity
            - floor plates with total area of appr. 60 m²
            - 2 angular plates, misc. tooling


        • Schiess Moweg GmbH
        • Egerstraße 73-75
        • 41236 Mönchengladbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. PEGARD PRECIVIT 2MM TRO1400


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03582 · Floor Type Boring and Milling M/C - Hor.

          PEGARD - PRECIVIT 2MM TRO1400 - - 1998 - Siemens

          Technical details
          spindle diameter 130 mm︱x-travel 9000 mm︱y-travel 1800 mm︱z-travel 1000 mm︱B-axis (table) 3 U/min︱w-axis 1500 mm︱Control Siemens ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            spindle diameter 130 mm
            x-travel 9000 mm
            y-travel 1800 mm
            z-travel 1000 mm
            B-axis (table) 3 U/min
            w-axis 1500 mm
            Control Siemens
            Description :
            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION NC 130


          • Brandner Revalue GmbH
          • Mozartstr. 24
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 928 58 75
            +49 (0) 7309 928 58 74
          • mb@b-rv.de
            www.b-rv.de
          #2011-219907 · Floor Type Boring and Milling M/C - Hor.

          UNION - NC 130 - - 1995/2005 - Heidenhain

          Technical details
          spindle diameter 130 mm︱x-travel 2800 mm︱y-travel 2500 mm︱Control Heidenhain ︱total power requirement 57,4 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 2800 mm
            y-travel 2500 mm
            Control Heidenhain
            total power requirement 57,4 kW


        • Brandner Revalue GmbH
        • Mozartstr. 24
        • 89264 Weißenhorn
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. JUARISTI 205 M CNC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03055 · Floor Type Boring and Milling M/C - Hor.

          JUARISTI - 205 M CNC - - 1993 - Heidenhain

          Technical details
          spindle diameter 205 mm︱x-travel 10000 mm︱y-travel 2500 mm︱w-axis 500 mm︱spindle travel 1250 mm︱Control Heidenhain ︱type TNC 355 ︱spindle taper ISO 50 ︱transmission ratio 2 ︱feed - independent 0-3000 mm︱spindle motor 37 kW︱total power requirement 70 kW︱weight of the machine ca. t︱dimensions of the machine ca. 14,1x3,2x5,6 m︱
            spindle diameter 205 mm
            x-travel 10000 mm
            y-travel 2500 mm
            w-axis 500 mm
            spindle travel 1250 mm
            Control Heidenhain
            type TNC 355
            spindle taper ISO 50
            transmission ratio 2
            feed - independent 0-3000 mm
            spindle motor 37 kW
            total power requirement 70 kW
            dimensions of the machine ca. 14,1x3,2x5,6 m


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION BFP130 CNC


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-11471BE · Floor Type Boring and Milling M/C - Hor.

          UNION - BFP130 CNC - - 1991 - Heidenhain TNC 426

          Technical details
          spindle diameter 130 mm︱x-travel 5000 mm︱y-travel 3000 mm︱control Heidenhain TNC 426 ︱taper ISO 50 P.D.B. ︱w-axis 900 mm︱z-travel 500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 130 mm
            x-travel 5000 mm
            y-travel 3000 mm
            control Heidenhain TNC 426
            taper ISO 50 P.D.B.
            w-axis 900 mm
            z-travel 500 mm


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. WOTAN Rapid 3 K


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12639B · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid 3 K - - 1991 - Siemens

          Technical details
          spindle diameter 130 mm︱x-travel 9000 mm︱y-travel 3500 mm︱Control Siemens ︱type Sinumerik 850 M ︱spindle taper ISO 160 ︱turning speeds 2 - 1600 U/min︱power capacity 80 kW︱z-travel 1000 mm︱w-axis 900 mm︱total power requirement kW︱dimensions of the machine ca. m︱
          Panel is optional and we charged extra
            spindle diameter 130 mm
            x-travel 9000 mm
            y-travel 3500 mm
            Control Siemens
            type Sinumerik 850 M
            spindle taper ISO 160
            turning speeds 2 - 1600 U/min
            power capacity 80 kW
            z-travel 1000 mm
            w-axis 900 mm
            Description :
            Panel is optional and we charged extra


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION BFP130 CNC


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-V0046 · Floor Type Boring and Milling M/C - Hor.

          UNION - BFP130 CNC - - 1991 - Heidenhain TNC 426

          Technical details
          spindle diameter 130 mm︱x-travel 5000 mm︱y-travel 3000 mm︱control Heidenhain TNC 426 ︱taper ISO 50 P.D.B. ︱w-axis 900 mm︱z-travel 500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Right Angle Vertical Head Spindle Support Metal Way Covers Operator Platform
            spindle diameter 130 mm
            x-travel 5000 mm
            y-travel 3000 mm
            control Heidenhain TNC 426
            taper ISO 50 P.D.B.
            w-axis 900 mm
            z-travel 500 mm
            Description :
            Right Angle Vertical Head
            Spindle Support
            Metal Way Covers
            Operator Platform


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. JUARISTI 110


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03160 · Floor Type Boring and Milling M/C - Hor.

          JUARISTI - 110 - - 1990 -

          Technical details
          spindle diameter 110 mm︱x-travel 4440 mm︱y-travel 1500 mm︱z-axis 400 mm︱turning speeds 7-1000 U/min︱Tool bore SK 50 ︱spindle stroke 800 mm︱digital readout ︱total power requirement kW︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          optional with floor plate
            spindle diameter 110 mm
            x-travel 4440 mm
            y-travel 1500 mm
            z-axis 400 mm
            turning speeds 7-1000 U/min
            Tool bore SK 50
            spindle stroke 800 mm
            weight of the machine ca. 15 t
            Description :
            optional with floor plate


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. SCHARMANN Ecocut 1.6


          • Schiess Moweg GmbH
          • Egerstraße 73-75
          • 41236 Mönchengladbach
          • Deutschland

          • +49 (0) 2166 61530
            +49 (0)2166 615315
          • info@schiess-moweg.de
            www.schiess-moweg.de
          #1034-03912 · Floor Type Boring and Milling M/C - Hor.

          SCHARMANN - Ecocut 1.6 - - 1986/2003 - HEIDENHAIN iTNC 530

          Technical details
          spindle diameter 125 mm︱x-travel 5600 mm︱y-travel 1600 mm︱z-travel 800 mm︱spindle stroke 600 mm︱spindle taper ISO 50 ︱spindle turning speed range 12 - 3000 U/min︱spindle drive 40 kW︱rapid speed 15 m/min︱total power requirement 65 kW︱weight of the machine ca. 60 t︱dimensions of the machine ca. 12,1 x 4,8 x 3,9 m︱
          with CNC HEIDENHAIN iTNC 530 modernized in 2003 automatic toolchanger 60 pockets boring table make: RÜCKLE 2000 x 1800 mm max. 20 to. load floor plates 3500 x 2000 and 2500 x 2000 mm coolant attachment
            spindle diameter 125 mm
            x-travel 5600 mm
            y-travel 1600 mm
            z-travel 800 mm
            spindle stroke 600 mm
            spindle taper ISO 50
            spindle turning speed range 12 - 3000 U/min
            spindle drive 40 kW
            rapid speed 15 m/min
            total power requirement 65 kW
            weight of the machine ca. 60 t
            dimensions of the machine ca. 12,1 x 4,8 x 3,9 m
            Description :
            with CNC HEIDENHAIN iTNC 530 modernized in 2003
            automatic toolchanger 60 pockets
            boring table make: RÜCKLE 2000 x 1800 mm max. 20 to. load
            floor plates 3500 x 2000 and 2500 x 2000 mm
            coolant attachment


        • Schiess Moweg GmbH
        • Egerstraße 73-75
        • 41236 Mönchengladbach
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION BFP 130.6


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18536 · Floor Type Boring and Milling M/C - Hor.

          UNION - BFP 130.6 - - 1984/1996 - Heidenhain TNC 360

          Technical details
          spindle diameter 130 mm︱x-travel 6000 mm︱y-travel 2500 mm︱z-travel 900 mm︱w-axis 360 mm︱milling spindle / ram ISO 50 mm︱bore spindle turning speed range 6 - 900 U/min︱Control Heidenhain TNC 360 ︱weight of the machine ca. 35 t︱dimensions of the machine ca. 9 x 4 x 6 m︱
          - CNC control HEIDENHAIN TNC 360 - facing Head - rotary table TI 1800, table surface 1800x2000 mm, table load 12500 kg, table move 1200 mm - no floor plates
            spindle diameter 130 mm
            x-travel 6000 mm
            y-travel 2500 mm
            z-travel 900 mm
            w-axis 360 mm
            milling spindle / ram ISO 50 mm
            bore spindle turning speed range 6 - 900 U/min
            Control Heidenhain TNC 360
            weight of the machine ca. 35 t
            dimensions of the machine ca. 9 x 4 x 6 m
            Description :
            - CNC control HEIDENHAIN TNC 360
            - facing Head
            - rotary table TI 1800, table surface 1800x2000 mm, table load 12500 kg, table
            move 1200 mm
            - no floor plates




        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION BFP 125


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18189 · Floor Type Boring and Milling M/C - Hor.

          UNION - BFP 125 - - 1981 -

          Technical details
          spindle diameter 125 mm︱x-travel 6000 mm︱y-travel 1800 mm︱spindle turning speed range 355 - 710 U/min︱spindle travel 1120 mm︱ 1600 x 1400 mm︱faceplate 800 mm︱table travel 1250 mm︱total power requirement 18 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 6 x 3,5 x 3,5 m︱
          equipped with: - digital readout 3-axes - Counterholder (with digital readout 2-axes) - Rotary table 1600 x 1400mm (360x 1°) - face plate with sleides - Central lubrication - 5 floor plates (3x 3000x1800mm & 2x 4600x1300mm) - Tools
            spindle diameter 125 mm
            x-travel 6000 mm
            y-travel 1800 mm
            spindle turning speed range 355 - 710 U/min
            spindle travel 1120 mm
            1600 x 1400 mm
            faceplate 800 mm
            table travel 1250 mm
            total power requirement 18 kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. 6 x 3,5 x 3,5 m
            Description :
            equipped with:
            - digital readout 3-axes
            - Counterholder (with digital readout 2-axes)
            - Rotary table 1600 x 1400mm (360x 1°)
            - face plate with sleides
            - Central lubrication
            - 5 floor plates (3x 3000x1800mm & 2x 4600x1300mm)
            - Tools


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. WOTAN Rapid 2 K


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02748 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid 2 K - - 1980/2007 - Siemens

          Technical details
          spindle diameter 130 mm︱x-travel 7700 mm︱y-travel 1500 mm︱Control Siemens ︱type Sinumerik 840 C ︱spindle taper ISO 130 ︱turning speeds 1490 U/min︱power capacity 45 kW︱chip conveyor ︱Angle head ︱Angle head ︱Plate area 9000x6000 mm︱workpiece weight 100 t︱One direction thrust bearing ︱total power requirement kW︱dimensions of the machine ca. m︱
          Panel is optional and we charged extra
            spindle diameter 130 mm
            x-travel 7700 mm
            y-travel 1500 mm
            Control Siemens
            type Sinumerik 840 C
            spindle taper ISO 130
            turning speeds 1490 U/min
            power capacity 45 kW
            Plate area 9000x6000 mm
            workpiece weight 100 t
            Description :
            Panel is optional and we charged extra


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. WOTAN Rapid 2 K


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12541B · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid 2 K - - 1980/2007 - Siemens

          Technical details
          spindle diameter 130 mm︱x-travel 7700 mm︱y-travel 1500 mm︱Control Siemens ︱type Sinumerik 840 C ︱spindle taper ISO 130 ︱turning speeds 1490 U/min︱power capacity 45 kW︱chip conveyor ︱Angle head ︱Angle head ︱Plate area 9000x6000 mm︱workpiece weight 100 t︱One direction thrust bearing ︱total power requirement kW︱dimensions of the machine ca. m︱
          Panel is optional and we charged extra
            spindle diameter 130 mm
            x-travel 7700 mm
            y-travel 1500 mm
            Control Siemens
            type Sinumerik 840 C
            spindle taper ISO 130
            turning speeds 1490 U/min
            power capacity 45 kW
            Plate area 9000x6000 mm
            workpiece weight 100 t
            Description :
            Panel is optional and we charged extra


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. CERUTI ADM-ADL 125


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-01590 · Floor Type Boring and Milling M/C - Hor.

          CERUTI - ADM-ADL 125 - - 1979 -

          Technical details
          spindle diameter 125 mm︱x-travel 2500 mm︱y-travel 2100 mm︱spindle taper ISO 50 ︱spindle turning speed range 5-1000 U/min︱spindle travel 900 mm︱Radial face slide 650 mm︱radial face slide travel 250 mm︱angular milling head ︱rotary table: ︱table surface area 2000x2500 mm︱table height 800 mm︱table travel 1700 mm︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. m︱
          Table, Floorplate, tools
            spindle diameter 125 mm
            x-travel 2500 mm
            y-travel 2100 mm
            spindle taper ISO 50
            spindle turning speed range 5-1000 U/min
            spindle travel 900 mm
            Radial face slide 650 mm
            radial face slide travel 250 mm
            table surface area 2000x2500 mm
            table height 800 mm
            table travel 1700 mm
            weight of the machine ca. 25 t
            Description :
            Table, Floorplate, tools


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. JUARISTI MDR 110


          • Karl Günter Wirths GmbH
          • Scharpenberger Strasse 96-98
          • 58256 Ennepetal
          • Deutschland

          • 02333-79050
            02333-790555
          • sales@wirths.net
            www.wirths.net
          #1041-80066 · Floor Type Boring and Milling M/C - Hor.

          JUARISTI - MDR 110 - - 1975 -

          Technical details
          spindle diameter 110 mm︱x-travel 8000 mm︱y-travel 1650 mm︱z-travel 400 mm︱W-axis (spindle longitudinal) 800 mm︱spindle turning speed - stepless 6 - 1000 U/min︱spindle taper ISO 50 ︱Plates available 7 ︱plate size 2100 x 1200 mm︱feeds 10 - 600 mm/U︱rapid traverse 2500 mm/min︱weight of the machine ca. 35 t︱engine output 17 kW︱
          Machine has DRO, faceplate, vertical milling head, rotary table and floor plates (10 x 2 m). It will be supplied with many tool holders, tools and angular clamping devises.
            spindle diameter 110 mm
            x-travel 8000 mm
            y-travel 1650 mm
            z-travel 400 mm
            W-axis (spindle longitudinal) 800 mm
            spindle turning speed - stepless 6 - 1000 U/min
            spindle taper ISO 50
            Plates available 7
            plate size 2100 x 1200 mm
            feeds 10 - 600 mm/U
            rapid traverse 2500 mm/min
            weight of the machine ca. 35 t
            engine output 17 kW
            Description :
            Machine has DRO, faceplate, vertical milling head, rotary table and floor
            plates (10 x 2 m). It will be supplied with many tool holders, tools and
            angular clamping devises.


        • Karl Günter Wirths GmbH
        • Scharpenberger Strasse 96-98
        • 58256 Ennepetal
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. WOTAN B 160


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03587 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - B 160 - - 1975 -

          Technical details
          spindle diameter 160 mm︱x-travel 3000 mm︱y-travel 2000 mm︱spindle stroke 1300 mm︱spindle taper ISO 50 ︱turning speeds 2-800 U/min︱spindle feeds: 0,03-12 mm/U︱rotary table: Union ︱type TT 2 mm︱table surface area 1800x2000 mm︱table-regulation 1250 mm︱rotation movement 360 Grad︱total power requirement 30 kW︱weight of the machine ca. 40 t︱dimensions of the machine ca. 6,5x7x5,1 m︱
          Plate boring mill: Spindle stroke W-axis: 1300 mm Spindle mount: ISO 50 Spindle speed: 2-800 rpm Feeds: 0.03-12 mm / rev Rapid traverse: 2750 mm / min Boring table: Make: Union Type: TI 2 Dimensions: 1800x2000 mm Material weight max .: 12.5 t Rotatable: 360 degrees Telescopic cover About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us.
            spindle diameter 160 mm
            x-travel 3000 mm
            y-travel 2000 mm
            spindle stroke 1300 mm
            spindle taper ISO 50
            turning speeds 2-800 U/min
            spindle feeds: 0,03-12 mm/U
            rotary table: Union
            type TT 2 mm
            table surface area 1800x2000 mm
            table-regulation 1250 mm
            rotation movement 360 Grad
            total power requirement 30 kW
            weight of the machine ca. 40 t
            dimensions of the machine ca. 6,5x7x5,1 m
            Description :
            Plate boring mill:
            Spindle stroke W-axis: 1300 mm
            Spindle mount: ISO 50
            Spindle speed: 2-800 rpm
            Feeds: 0.03-12 mm / rev
            Rapid traverse: 2750 mm / min

            Boring table:

            Make: Union
            Type: TI 2
            Dimensions: 1800x2000 mm
            Material weight max .: 12.5 t
            Rotatable: 360 degrees
            Telescopic cover

            About usmore than 400 machines in the warehouse over 12000 m² storage area,
            crane capacity 70 tmore than 1000 items accessories for your workshopYou want
            to sell machines production lines or your company, then talk to us.


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. UNION BFP 125/5


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-02486 · Floor Type Boring and Milling M/C - Hor.

          UNION - BFP 125/5 - - 1973 -

          Technical details
          spindle diameter 125 mm︱x-travel 2360 mm︱y-travel 1570 mm︱z-travel 780 mm︱w-axis 410 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            spindle diameter 125 mm
            x-travel 2360 mm
            y-travel 1570 mm
            z-travel 780 mm
            w-axis 410 mm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. COLLET & ENGELHARDT BF 130 - 11


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-383659 · Floor Type Boring and Milling M/C - Hor.

          COLLET & ENGELHARDT - BF 130 - 11 - - 1973 -

          Technical details
          spindle diameter 130 mm︱x-travel 3000 mm︱y-travel 2000 mm︱total power requirement 4,5 kW︱weight of the machine ca. 30 t︱
          Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.
            spindle diameter 130 mm
            x-travel 3000 mm
            y-travel 2000 mm
            total power requirement 4,5 kW
            weight of the machine ca. 30 t
            Description :
            Spindle Ø 130 mm
            Spindle taper SK 50

            Working range: X = column, longitudinal 3,000 mm
            Y = headstock, vertical 2,000 mm
            Z = spindle stroke 1,000 mm

            Lower table 3,300 x 2.400 mm
            Max. weight on table 10 tons/m²
            Min./ max position of work spindle above table 770 / 2,770 mm

            Feeds 0.9 - 2,000 mm/min
            Quick feed for headstock and column 5,000 mm/min
            Quill feed 0.5 - 1,200 mm/min

            Speed range, partially infinitely variable 4.5 - 1,250 rpm
            Weight, approx. 30,000 kg

            Accessories / Special Features
            * HEIDENHAIN Digital Display for 3 axes.
            * Hardened guideways. * Ball screw spindles.
            * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor.
            * Moving operating platform. * Hanging control panel. * Manual operating control.
            * Platform. * Hydrostatics in the column displacement.
            * Mounting plate 3,200 x 2,500 mm, planed, with t-slots.
            * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled.
            * Hydraulic clamping of column and slides. * Motor driven tool clamp.
            * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories.


            This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers.

            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.


        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Boring mills / Machining Centers / Drilling machines Floor Type Boring and Milling M/C - Hor. COLLET BFP 130


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12539B · Floor Type Boring and Milling M/C - Hor.

          COLLET - BFP 130 - - 1969 -

          Technical details
          spindle diameter 130 mm︱x-travel 8000 mm︱y-travel 3000 mm︱Plate area 8500x5500 mm︱digital readout AEG ︱w-axis 1650 mm︱total power requirement 35 HP︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Panel is optional and we charged extra
            spindle diameter 130 mm
            x-travel 8000 mm
            y-travel 3000 mm
            Plate area 8500x5500 mm
            digital readout AEG
            w-axis 1650 mm
            total power requirement 35 HP
            Description :
            Panel is optional and we charged extra


        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   


          A horizontal floor type boring and milling M/C for you
          Find a horizontal floor type boring and milling M/C at LagerMaschinen

          A horizontal floor type boring and milling M/C is used for a wide variety of functions in industrial metalworking. It offers a number of advantages for owners and operators. They can accomplish simple tasks like planing and drilling and more complex ones like contouring with a high level of precision and accuracy. They also come in a wide range of sizes making it easy to find one suited to your business needs. Look for a used horizontal floor type boring and milling M/C at LagerMaschinen to get the most for your money.

          Find the best boring and milling machines for your needs

          The most common types of boring and milling machines are vertical and horizontal. A horizontal floor type boring and milling M/C is best suited to remove large quantities of material quickly. A horizontal floor type boring and milling M/C tends to be larger in size and therefore more expensive but that needn’t be cause for concern. Buying used machinery is a practical solution. LagerMaschinen makes it easy for you to find the best equipment for your needs at a price you can afford.

          Save both time and money by shopping at LagerMaschinen

          They say time is money and both are crucial to the functioning of a successful business. At LagerMaschinen you can make the most of these valuable commodities. The user-friendly platform allows you to search for equipment based on price location or specific needs making the shopping process a breeze. Whether you need a horizontal floor type boring and milling M/C or any other large equipment LagerMaschinen can help.