Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Gear cutting machines

          Machinelist: Gear cutting machines


          Bevel Gear Generator - Spiral

          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-16040 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1,5 ︱total power requirement 62 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7x4,4x2,45 m︱
          max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1,5
            total power requirement 62 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7x4,4x2,45 m
            Description :
            max. wheel diameter mm
            gear width mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m



            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 [...]

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 [...]
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min


          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02478 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱
          Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
            Description :
            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 r.p.m.

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 r.p.m.
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min

            - 13 milling cutters included -
          44.000 €
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG AMKU 630


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20898 · Bevel Gear Generator - Spiral

          KLINGELNBERG - AMKU 630 - - 1979 -

          Technical details
          Rad-Ý - max. 630 mm︱gear width 100 mm︱max. module 8 mm︱min. module 3,5 mm︱swival range +/- 0-90 °︱distance of workpiece spindle-taper cone 315 mm︱turning speed range 18-111 U/min︱roll feed 1-50 °/min︱plunge feed hydr. stepless 0,1-5 mm/min︱electrics - voltage/frequency 380/50 V/Hz︱total power requirement 30 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 4,8 x 2,3 x 2,4 m︱
            Rad-Ý - max. 630 mm
            gear width 100 mm
            max. module 8 mm
            min. module 3,5 mm
            swival range +/- 0-90 °
            distance of workpiece spindle-ta. 315 mm
            turning speed range 18-111 U/min
            roll feed 1-50 °/min
            plunge feed hydr. stepless 0,1-5 mm/min
            electrics - voltage/frequency 380/50 V/Hz
            total power requirement 30 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 4,8 x 2,3 x 2,4 m
            Description :

          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Spiral KLINGELNBERG AMKU 630


          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-16023 · Bevel Gear Generator - Spiral

          KLINGELNBERG - AMKU 630 - - 1978 -

          Technical details
          max. wheel diameter 630 mm︱gear width 120 mm︱max. module 12 ︱min. module 2,2 ︱max. number of teeth 120 ︱min. number of teeth 5 ︱weight of the machine ca. 16 t︱dimensions of the machine ca. 4750 x 2300 x 2600 mm m︱
            max. wheel diameter 630 mm
            gear width 120 mm
            max. module 12
            min. module 2,2
            max. number of teeth 120
            min. number of teeth 5
            weight of the machine ca. 16 t
            dimensions of the machine ca. 4750 x 2300 x 2600 mm m
          Datasheet
          Request / Contact

          Bevel Gear Generator - Straight

          used Gear cutting machines Bevel Gear Generator - Straight KLINGELNBERG BF 203


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-16487 · Bevel Gear Generator - Straight

          KLINGELNBERG - BF 203 - - 1984 / 1986 -

          Technical details
          max. wheel diameter 238 (260) mm︱tooth width 60 mm︱max. module 10 ︱min. module 1,5 ︱min. workpiece diameter 12 mm︱min/max. pitch cone angle 0 - 85 °︱cone distance 130 mm︱no. of teeth 6- 99 ︱blade cutter head diameter 600 mm︱number of blades 2 x 36 ︱total power requirement ca 18 kW︱weight of the machine ca. 6,6 t︱
          2 Machines available year of make 1984 & 1986 Machines are both dismantled and stored
            max. wheel diameter 238 (260) mm
            tooth width 60 mm
            max. module 10
            min. module 1,5
            min. workpiece diameter 12 mm
            min/max. pitch cone angle 0 - 85 °
            cone distance 130 mm
            no. of teeth 6- 99
            blade cutter head diameter 600 mm
            number of blades 2 x 36
            total power requirement ca 18 kW
            weight of the machine ca. 6,6 t
            Description :


            2 Machines available
            year of make 1984 & 1986
            Machines are both dismantled and stored
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight KLINGELNBERG BF 204


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-07681 · Bevel Gear Generator - Straight

          KLINGELNBERG - BF 204 - - 1980 -

          Technical details
          max. wheel diameter 180 mm︱gear width 60 mm︱max. module 8 / 10 ︱min. module 1,5 ︱tooth length max. 16 mm︱no. of teeth Segment 6 ︱no. of teeth Vollrundung 6-30 ︱pivoting angle 0 - 10 °︱inserted tooth milling cutter dia. 600 mm︱cutting speed Frässpindel 48-78 m/min︱root circle dia. min. 50 mm︱electrics - voltage/frequency 380 / 50 V/Hz︱total power requirement 16 kW︱weight of the machine ca. 7,6 t︱
          Segmental Gear Generating Machine - specifically for rational production of tapered or cylindrical segmental gears, such as steering sector shafts. This model also operates to the generating-indexing method and permits tooth thickness modifications on the centre Tooth. with chip conveyor and handbooks ex works South Americ
            max. wheel diameter 180 mm
            gear width 60 mm
            max. module 8 / 10
            min. module 1,5
            tooth length max. 16 mm
            no. of teeth Segment 6
            no. of teeth Vollrundung 6-30
            pivoting angle 0 - 10 °
            inserted tooth milling cutter di. 600 mm
            cutting speed Frässpindel 48-78 m/min
            root circle dia. min. 50 mm
            electrics - voltage/frequency 380 / 50 V/Hz
            total power requirement 16 kW
            weight of the machine ca. 7,6 t
            Description :
            Segmental Gear Generating Machine - specifically for rational production of
            tapered or cylindrical segmental gears, such as steering sector shafts.
            This model also operates to the generating-indexing method and permits tooth
            thickness modifications on the centre Tooth.

            with chip conveyor and handbooks
            ex works South Americ
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Generator - Straight GLEASON 726 Revacycle


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17695 · Bevel Gear Generator - Straight

          GLEASON - 726 Revacycle - - 1979 -

          Technical details
          max. wheel diameter 152 mm︱gear width 14,8 mm︱max. module 2,5 ︱total power requirement 20 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 3,2 x 2,3 x 2 m︱
          Max. height of teeth 14,8 mm Max. external Ø of workpiece 152 mm Max. external Ø of workpiece, w. automatic loading device 102 mm Root angle, min. / max. 15 / 44 ° Tooth width 28 mm No. of teeth 8 - 50 Cutter speeds 32.6 - 49.7 mm Workpiece feeds per tooth 2 - 3.1 sec Workspindle bore 22 mm Accessories / Special Features - Automatic roughing and finishing cycles. - Various tools and other accessories. - Coolant device
            max. wheel diameter 152 mm
            gear width 14,8 mm
            max. module 2,5
            total power requirement 20 kW
            weight of the machine ca. 9,5 t
            dimensions of the machine ca. 3,2 x 2,3 x 2 m
            Description :
            Max. height of teeth 14,8 mm
            Max. external Ø of workpiece 152 mm
            Max. external Ø of workpiece, w. automatic loading device 102 mm
            Root angle, min. / max. 15 / 44 °
            Tooth width 28 mm
            No. of teeth 8 - 50
            Cutter speeds 32.6 - 49.7 mm
            Workpiece feeds per tooth 2 - 3.1 sec
            Workspindle bore 22 mm
            Accessories / Special Features
            - Automatic roughing and finishing cycles.
            - Various tools and other accessories.
            - Coolant device

          Datasheet
          Request / Contact

          Bevel Gear Grinding Machine

          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17513 · Bevel Gear Grinding Machine

          GLEASON - 275 G - - 2007 - 160 i - MB FANUC

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱diameter of tools min 69,85 mm︱tooth width max. 58 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control 160 i - MB FANUC︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          with EWAB robot cell (KUKA Robot) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            diameter of tools min 69,85 mm
            tooth width max. 58 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control 160 i - MB FANUC
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            with EWAB robot cell
            (KUKA Robot)
            no coolant filter system available
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 275 G


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17512 · Bevel Gear Grinding Machine

          GLEASON - 275 G - - 2005 - SIN 840 D SIEMENS

          Technical details
          ratio of transmission 10:1 ︱min. number of teeth 3 ︱max. number of teeth 200 ︱range of tooth size 20 mm︱tooth width max. 58 mm︱diameter of tools min 69,85 mm︱diameter of tools max. 230 mm︱x-axis 325 mm︱y-axis 350 mm︱z-axis 470 mm︱work piece table - Ø 212,71 mm︱b-axis + 90,1 / - 1 °︱Control SIN 840 D SIEMENS︱total power requirement 75 kW︱weight of the machine ca. 10.000 Kg︱dimensions of the machine ca. 6,10 x 4,40 x 3,30 m︱
          with EWAB load cell built in 2012 (Linear loader) no coolant filter system available
            ratio of transmission 10:1
            min. number of teeth 3
            max. number of teeth 200
            range of tooth size 20 mm
            tooth width max. 58 mm
            diameter of tools min 69,85 mm
            diameter of tools max. 230 mm
            x-axis 325 mm
            y-axis 350 mm
            z-axis 470 mm
            work piece table - Ø 212,71 mm
            b-axis + 90,1 / - 1 °
            Control SIN 840 D SIEMENS
            total power requirement 75 kW
            weight of the machine ca. 10.000 Kg
            dimensions of the machine ca. 6,10 x 4,40 x 3,30 m
            Description :
            with EWAB load cell built in 2012
            (Linear loader)
            no coolant filter system available
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine KLINGELNBERG G27


          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-19112 · Bevel Gear Grinding Machine

          KLINGELNBERG - G27 - - 2004 - Siemens 840 D

          Technical details
          max. wheel diameter 300 mm︱gear width 60 mm︱max. module 8 ︱min. module 0,7 ︱control Siemens 840 D ︱total power requirement 146 kW︱weight of the machine ca. 21 t︱dimensions of the machine ca. m︱
          TECHNICAL DETAILS max. wheel diameter 300 mm gear width ca. 60 mm max. module 8 min. module 0,7 Control SIEMENS 840 D min/max. pitch cone angle - 90 ... + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7500 U/min work piece spindle speed 700 U/min total power requirement 146 kW weight of the machine ca. 21 t dimensions of the machine ca. 5,5 x 3,6 x 3,1 m Precision Grinding Machine for the machining of spiral bevel gears according to the systems Klingelnberg, Wiener, Oerlikon, Gleason, as well as for the machining of front clutches and curvic couplings. Equipment / Accessories: Hoffmann Filteranlage ERK330-V-2-S
            max. wheel diameter 300 mm
            gear width 60 mm
            max. module 8
            min. module 0,7
            control Siemens 840 D
            total power requirement 146 kW
            weight of the machine ca. 21 t
            Description :
            TECHNICAL DETAILS
            max. wheel diameter 300 mm
            gear width ca. 60 mm
            max. module 8
            min. module 0,7
            Control SIEMENS 840 D
            min/max. pitch cone angle - 90 ... + 90 °
            workpiece spindle - bore 127 mm
            grinding wheel diameter 50 - 230 mm
            spindle speeds (infinitely variable) 7500 U/min
            work piece spindle speed 700 U/min
            total power requirement 146 kW
            weight of the machine ca. 21 t
            dimensions of the machine ca. 5,5 x 3,6 x 3,1 m

            Precision Grinding Machine for the machining of spiral bevel gears according to
            the systems Klingelnberg, Wiener, Oerlikon, Gleason, as well as for the
            machining of front clutches and curvic couplings.
            Equipment / Accessories:
            Hoffmann Filteranlage ERK330-V-2-S
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 200 HG


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17417 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 200 HG - - 1999 - 150-M FANUC

          Technical details
          ratio of transmission 10 : 1 ︱workpiece spindle swivable +/- - 5 / + 90 °︱range of tooth size 16mm mm︱tooth width 40,65 mm︱number of teeth 5 - 200 incl. ︱max. pitch circle 215,90 mm︱x-axis -152 / 102 mm︱y-axis -102 / 178 mm︱z-axis 51 / 304 mm︱control 150-M FANUC︱weight of machine 10,2 t︱dimensions of the machine ca. 3.30 x 1,85 x 2,85 m︱total power requirement 35 kW︱
          CNC- grinder for spiral- and hypoid bevel gear, GE Fanuc 150-M Control Only the machine is available - without coolant unit! - without loader system (it was scrapped!)
            ratio of transmission 10 : 1
            workpiece spindle swivable +/- - 5 / + 90 °
            range of tooth size 16mm mm
            tooth width 40,65 mm
            number of teeth 5 - 200 incl.
            max. pitch circle 215,90 mm
            x-axis -152 / 102 mm
            y-axis -102 / 178 mm
            z-axis 51 / 304 mm
            control 150-M FANUC
            weight of machine 10,2 t
            dimensions of the machine ca. 3.30 x 1,85 x 2,85 m
            total power requirement 35 kW
            Description :
            CNC- grinder for spiral- and hypoid bevel gear, GE Fanuc 150-M Control
            Only the machine is available
            - without coolant unit!
            - without loader system (it was scrapped!)
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON Phoenix 200 HG


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17610 · Bevel Gear Grinding Machine

          GLEASON - Phoenix 200 HG - - 1997 - 150-M FANUC

          Technical details
          max. wheel diameter 215,9 mm︱gear width 40 mm︱Control 150-M FANUC︱ratio of transmission 10 : 1 ︱number of teeth 5 - 200 ︱range of tooth size 16 mm︱tooth width max. 40,65 mm︱total power requirement 35 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 6,6 x 2,0 x 2,7 m︱
          Hoffmann Filtering System Type D4/2 Various Flanges / Grinding wheels Various Spare Parts
            max. wheel diameter 215,9 mm
            gear width 40 mm
            Control 150-M FANUC
            ratio of transmission 10 : 1
            number of teeth 5 - 200
            range of tooth size 16 mm
            tooth width max. 40,65 mm
            total power requirement 35 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 6,6 x 2,0 x 2,7 m
            Description :
            Hoffmann Filtering System Type D4/2
            Various Flanges / Grinding wheels
            Various Spare Parts
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON PHOENIX  200 HG


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-328540 · Bevel Gear Grinding Machine

          GLEASON - PHOENIX 200 HG - - 1997 -

          Technical details
          max. wheel diameter 215 mm︱gear width 40,65 mm︱max. module ︱total power requirement 20 kW︱weight of the machine ca. 10 t︱
          Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 215 mm
            gear width 40,65 mm
            total power requirement 20 kW
            weight of the machine ca. 10 t
            Description :
            Max. external Ø of workpiece 215 mm
            Tooth profile, height x width 16 x 40.65 mm
            No. of teeth 5 - 200
            Max. tooth ratio 1 : 10

            Grinding wheel Ø 51 - 190 mm
            Grinding wheel speeds 1,000 - 6,000 rpm

            X Axis (horizontal) 152 mm
            Y Axis (vertical) 178 mm
            Z Axis (slide base plate) 304 mm
            Distance from middle of machine to middle of workspindle 115 mm
            Axial speed 125 mm/sec
            Workpiece speeds 0 - 30 rpm

            Workspindle bore, conical 3 29/32 inch

            Total electrical load 20 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features

            * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
            * Extensive coolant equipment with filter system, band filter, etc.
            * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
            * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.


            Condition : Very good - machine can be inspected here under power
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Grinding Machine GLEASON 120 / 888 W


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-304112 · Bevel Gear Grinding Machine

          GLEASON - 120 / 888 W - - 1980 -

          Technical details
          max. wheel diameter 1010 mm︱gear width 0 mm︱max. module ︱min. module ︱total power requirement 15 kW︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. m︱
          Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.
            max. wheel diameter 1010 mm
            total power requirement 15 kW
            weight of the machine ca. 9,5 t
            Description :
            Max. depth of tooth 10 mm
            Max. workpiece Ø (for clearance) 1,010 mm
            Max. external Ø of coupling 610 mm

            Sliding base withdraw 216 mm
            Max. distance from grinding wheel to workpiece nose 90 - 430 mm
            Max. weight of workpiece, including clamp 500 kg

            No. of teeth 32 to 150

            Grinding wheel Ø, approx 152 - 320 mm
            Grinding wheel speeds, infinitely variable 0 - 3,600 rpm

            Work spindle bore 60 mm

            Total electrical load, approx. 15 kW - 380 V - 50 Hz
            Weight, approx. 9,500 kg

            Accessories / Special Features
            * Automatic roughing and finishing process via pre-settable counter and
            built-in feed cam.
            * Counter for number of teeth.
            * Counter for number of dressing cycles.
            * 2 built-on dressing units with three dressing diamonds for radius dressing,
            side dressing and wheel end dressing.
            * Built-on index plate for 48 teeth.
            * Separate coolant device with band filter.
            * Separate hydraulic unit.
            * Separate TRION oil mist exhaust.
            * Various small parts.
          Datasheet
          Request / Contact

          Bevel Gear Hardening Press

          used Gear cutting machines Bevel Gear Hardening Press KLINGELNBERG AH 400 DN


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-55035 · Bevel Gear Hardening Press

          KLINGELNBERG - AH 400 DN - - 1982 -

          Technical details
          max. workpiece diameter 400 mm︱ 0 ︱workpiece height max. 150 mm︱total power requirement 10 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. m︱
          Automatic quenching press, modern m/c.
            max. workpiece diameter 400 mm
            workpiece height max. 150 mm
            total power requirement 10 kW
            weight of the machine ca. 4 t
            Description :
            Automatic quenching press, modern m/c.
          Datasheet
          Request / Contact

          Bevel Gear Lapping Machine

          used Gear cutting machines Bevel Gear Lapping Machine OERLIKON Spiromatic selex L20


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03106 · Bevel Gear Lapping Machine

          OERLIKON - Spiromatic selex L20 - - 1991 - Siemens 820 M

          Technical details
          max. wheel diameter 500 mm︱gear width - mm︱max. module - ︱control Siemens 820 M ︱turning speed range - stepless 0-3000 U/min︱Installation area 4220x3000x2310 mm︱weight of the machine ca. 6500 kg︱
            max. wheel diameter 500 mm
            gear width - mm
            max. module -
            control Siemens 820 M
            turning speed range - stepless 0-3000 U/min
            Installation area 4220x3000x2310 mm
            weight of the machine ca. 6500 kg
            Description :

          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Lapping Machine KLINGELNBERG LKR 400 A 100


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-490759 · Bevel Gear Lapping Machine

          KLINGELNBERG - LKR 400 A 100 - - 1974 -

          Technical details
          max. wheel diameter 400 mm︱gear width NA mm︱max. module 1 ︱min. module 10 ︱total power requirement 12 kW︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. m︱
          K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _______________________________________________________ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.
            max. wheel diameter 400 mm
            gear width NA mm
            max. module 1
            min. module 10
            total power requirement 12 kW
            weight of the machine ca. 4,2 t
            Description :
            K L I N G E L N B E R G (Germany)
            Automatic Bevel Gear Lapping Machine
            Model LKR 400 A 100 Year 1974/1998 Serial No. 1890
            Partially reconditioned and electrically modernized in 1998 by
            Welter Company
            _______________________________________________________
            Max. Ø of crown gear 400 mm
            Adjustment of pinion spindle 160 / 250 mm
            Adjustment of crown gear spindle 115 / 265 mm

            Additional movements:
            Axial / distance / vertical, approx. + / - 2 mm
            Automatic tooth clearance 0 - 0.6 mm
            Module 1 - 10
            Axial offset, up / down, each 50 mm
            (= axial offset travel from middle position)

            Bore hole of driving spindle 100 taper
            Bore hole of driven spindle 60 taper
            6 spindle speeds 900 - 1,800 rpm

            Total electrical load 12 kW - 380 V - 50 Hz
            Weight 4,200 kg

            Accessories / Special Features
            * Hydraulic workpiece clamping for both spindles.
            * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc.
            * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism.
            * Separate switch cabinet. * Separate hydraulic unit, etc.

            Price, ex stock EUR 29,500.--

            The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.


          Datasheet
          Request / Contact

          Bevel Gear Shaping Machine

          used Gear cutting machines Bevel Gear Shaping Machine HEIDENREICH & HARBECK 60 HS 3


          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-20114 · Bevel Gear Shaping Machine

          HEIDENREICH & HARBECK - 60 HS 3 - - -

          Technical details
          min/max. wheel diameter at ratio = 1:10 25 / 600 mm︱gear width 0 - 90 mm︱module max. spur toothing 2 - 10 ︱min/max. pitch cone angle 5 - 90 °︱tooth length 90 mm︱stroke 0 - 100 mm︱weight of the machine ca. 5,9 t︱total power requirement 7,2 kW︱
            min/max. wheel diameter at ratio. 25 / 600 mm
            gear width 0 - 90 mm
            module max. spur toothing 2 - 10
            min/max. pitch cone angle 5 - 90 °
            tooth length 90 mm
            stroke 0 - 100 mm
            weight of the machine ca. 5,9 t
            total power requirement 7,2 kW
            Description :

          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Shaping Machine HEIDENREICH & HARBECK 60 HS 4


          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-20011 · Bevel Gear Shaping Machine

          HEIDENREICH & HARBECK - 60 HS 4 - - -

          Technical details
          min/max. wheel diameter at ratio = 1:10 25 / 600 mm︱gear width 0-90 mm︱module max. spur toothing 2 - 10 ︱min/max. pitch cone angle 5 - 90 °︱tooth length 90 mm︱stroke 0 - 100 mm︱weight of the machine ca. 5,9 t︱total power requirement 7,2 kW︱
          Top conditio, many accessories.
            min/max. wheel diameter at ratio. 25 / 600 mm
            gear width 0-90 mm
            module max. spur toothing 2 - 10
            min/max. pitch cone angle 5 - 90 °
            tooth length 90 mm
            stroke 0 - 100 mm
            weight of the machine ca. 5,9 t
            total power requirement 7,2 kW
            Description :
            Top conditio, many accessories.

          Datasheet
          Request / Contact

          Bevel Gear Testing Machine

          used Gear cutting machines Bevel Gear Testing Machine GEARTEC PSKE 900 HW


          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-20039 · Bevel Gear Testing Machine

          GEARTEC - PSKE 900 HW - - 2013 -

          Technical details
          gear diameter 900 / 500 mm︱gear width 500 mm︱max. module 1 - 10 .︱spur gear - distance of shafts 20 - 520 mm︱Control ︱workpiece weight max. 50 kg︱spindle bore 90 mm︱spindle turning speed - stepless max. 100 U/min︱power capacity kW︱weight of the machine ca. 2,7 t︱dimensions 2,0 x 2,4 x 1,9 mm︱
          Checking for spur gears and bevel gears!
            gear diameter 900 / 500 mm
            gear width 500 mm
            max. module 1 - 10 .
            spur gear - distance of shafts 20 - 520 mm
            workpiece weight max. 50 kg
            spindle bore 90 mm
            spindle turning speed - stepless max. 100 U/min
            weight of the machine ca. 2,7 t
            dimensions 2,0 x 2,4 x 1,9 mm
            Description :
            Checking for spur gears and bevel gears!
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Testing Machine OERLIKON Spiromatic T20


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03107 · Bevel Gear Testing Machine

          OERLIKON - Spiromatic T20 - - 1991 - Siemens 820 M

          Technical details
          max. wheel diameter 500 mm︱gear width - mm︱module - ︱Control Siemens 820 M ︱spindle turning speed - stepless 0 - 3000 U/min︱Work area over table ︱x-axis +/- 70 mm︱y-axis 200 mm︱z-axis 200 mm︱total power requirement 36 kW︱weight of the machine ca. 4500 kg︱dimensions of the machine ca. 4220x3000x2310 mm︱
          CNC production tester for spiral bevel and hypoid gears
            max. wheel diameter 500 mm
            gear width - mm
            module -
            Control Siemens 820 M
            spindle turning speed - stepless 0 - 3000 U/min
            x-axis +/- 70 mm
            y-axis 200 mm
            z-axis 200 mm
            total power requirement 36 kW
            weight of the machine ca. 4500 kg
            dimensions of the machine ca. 4220x3000x2310 mm
            Description :
            CNC production tester for spiral bevel and hypoid gears
          Datasheet
          Request / Contact
          used Gear cutting machines Bevel Gear Testing Machine GLEASON 513


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-385316 · Bevel Gear Testing Machine

          GLEASON - 513 - - 1975 -

          Technical details
          max. wheel diameter 400 mm︱gear width 0 mm︱module ︱pinion diameter - max. 254 mm︱axial cross angle 90 °︱total power requirement 15 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control. Max. gear outside diameter, approx. 508 mm Max. pinion outside diameter, approx. 254 mm Axial cross angle 90 ° Offset of pinion spindle above/below gear spindle, max. 102 mm Diameter of taper hole, pinion spindle 99/95 mm Diameter of taper hole, gear spindle 56/55 mm Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm Speeds of gear spindle, infinitely variable 0 - 1,250 rpm Spindle drive, approx. 5 / 7.5 kW Total electrical load, approx. 15 kW - 380 V - 50 Hz Accessories / Special Features * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc. * Hydraulic workpiece clamping. * Hydraulic slide clamping. * Tank for marking compound with mixer and pump, separate. * Separate switch cabinet. * Separate hydraulic unit. * Lots of spare parts, spare motors, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
            max. wheel diameter 400 mm
            pinion diameter - max. 254 mm
            axial cross angle 90 °
            total power requirement 15 kW
            Description :
            This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal.
            The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is "loaded" with a preset torque.
            The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run.
            Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automatic. The gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a RHF Control. Machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance. Also ideal for lab work, processing, and quality control.

            Max. gear outside diameter, approx. 508 mm
            Max. pinion outside diameter, approx. 254 mm
            Axial cross angle 90 °
            Offset of pinion spindle above/below gear spindle, max. 102 mm
            Diameter of taper hole, pinion spindle 99/95 mm
            Diameter of taper hole, gear spindle 56/55 mm
            Speeds of pinion spindle, infinitely variable 0 - 1,250 rpm
            Speeds of gear spindle, infinitely variable 0 - 1,250 rpm
            Spindle drive, approx. 5 / 7.5 kW
            Total electrical load, approx. 15 kW - 380 V - 50 Hz

            Accessories / Special Features
            * Large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc.
            * Hydraulic workpiece clamping. * Hydraulic slide clamping.
            * Tank for marking compound with mixer and pump, separate.
            * Separate switch cabinet. * Separate hydraulic unit.
            * Lots of spare parts, spare motors, etc.


            Condition : Good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected.
            Payment : Net, after conclusion of contract.

            Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.
          Datasheet
          Request / Contact

          Chamfering and Deburring Machine

          used Gear cutting machines Chamfering and Deburring Machine HURTH ZK 200/1-TE CNC


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-341998b · Chamfering and Deburring Machine

          HURTH - ZK 200/1-TE CNC - - 1991 -

          Technical details
          max. wheel diameter 0 mm︱max. number of teeth 0 ︱max. module ︱min. module ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC controlled milling machine for synchronous rings
            Description :
            CNC controlled milling machine for synchronous rings
          Datasheet
          Request / Contact
          used Gear cutting machines Chamfering and Deburring Machine PRÄWEMA W 2 - 1 SYNCHROFORM


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-347971 · Chamfering and Deburring Machine

          PRÄWEMA - W 2 - 1 SYNCHROFORM - - 1991 -

          Technical details
          max. wheel diameter 400 mm︱max. number of teeth 150 ︱max. module 5 ︱total power requirement 16 kW︱weight of the machine ca. 10 t︱
          Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.
            max. wheel diameter 400 mm
            max. number of teeth 150
            max. module 5
            total power requirement 16 kW
            weight of the machine ca. 10 t
            Description :
            Workpiece Ø, min./max. 30 - 400 mm
            Number of teeth 6 - 150
            Module range, max. 5

            Tool holder shaft Ø SK 30 / 20
            Tool speeds 4,000 rpm
            Spindle drive max. infinitely variable 1.8 kW
            Feeds, longitudinal and cross 0.001 - 12 m/min
            Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm
            Workspindle slide 400 mm
            Tool speed, max. 3,000 rpm
            Tool holder SK 30

            Total electrical load, approx. 16 kW - 380 V - 50 Hz
            Weight, approx. 10,000 kg

            Accessories / Special Features
            * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process.
            * 2 workspindle units, left and right, which can be set at any angle.
            * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide.
            * L and O Axes for milling spindle. C Axis for workspindle rotation.
            * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control.
            * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air.
            * Coolant equipment with chip conveyor.
            * Noise protection cabin. * Central lubrication.
            * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc.


            The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity.

            Condition : Good to very good. Machine can soon be inspected under power.
            Delivery : Ex stock, as inspected
            Payment : Net, after conclusion of contract

            Thank you for your interest. We always have a good selection of gear machines available on stock.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •