Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Запит

Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          1. machine-categorie:
          2. Metal Processing
          3. Gear cutting machines
          4. Spiral Bevel Gear Cutting Machine

          Spiral Bevel Gear Cutting Machine

          Machinelist: Spiral Bevel Gear Cutting Machine

          Spiral Bevel Gear Cutting Machine

          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 27

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17618 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 27 - - 2006 - SINUMERIK 840 D SIEMENS

          Technical details
          max. wheel diameter 270 mm︱max. module 6,5 ︱min. module 1,5 ︱Control SINUMERIK 840 D SIEMENS︱tooth width 58 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 180 ︱min. number of teeth 6 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱blade cutter head diameter 39 - 105 mm︱blade head turning speeds 1.500 U/min︱work piece spindle speed 1.500 U/min︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,70 x 2,10 x 2,10 m︱
          U - Axis; Loader Felsomat without accessories; external deburring Milling technique used is Face Hobbing (Continuous) and Face Milling (Single Parting) Gleason Form (conical teeth hight)
            max. wheel diameter 270 mm
            max. module 6,5
            min. module 1,5
            Control SINUMERIK 840 D SIEMENS
            tooth width 58 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            blade cutter head diameter 39 - 105 mm
            blade head turning speeds 1.500 U/min
            work piece spindle speed 1.500 U/min
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m
            Description :
            U - Axis; Loader Felsomat without accessories; external deburring
            Milling technique used is Face Hobbing (Continuous) and Face Milling (Single
            Parting)
            Gleason Form (conical teeth hight)
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 27

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17619 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 27 - - 2006 - SINUMERIK 840 D SIEMENS

          Technical details
          max. wheel diameter 270 mm︱max. module 6,5 ︱min. module 1,5 ︱Control SINUMERIK 840 D SIEMENS︱tooth width 58 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 180 ︱min. number of teeth 6 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱blade cutter head diameter 39 - 105 mm︱blade head turning speeds 1.500 U/min︱work piece spindle speed 1.500 U/min︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,70 x 2,10 x 2,10 m︱
          U - Axis; Loader Felsomat without accessories; external deburring Milling technique used is Face Hobbing (Continuous) and Face Milling (Single Parting) Gleason Form (conical teeth hight)
            max. wheel diameter 270 mm
            max. module 6,5
            min. module 1,5
            Control SINUMERIK 840 D SIEMENS
            tooth width 58 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            blade cutter head diameter 39 - 105 mm
            blade head turning speeds 1.500 U/min
            work piece spindle speed 1.500 U/min
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m
            Description :
            U - Axis; Loader Felsomat without accessories; external deburring
            Milling technique used is Face Hobbing (Continuous) and Face Milling (Single
            Parting)
            Gleason Form (conical teeth hight)
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 27

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17570 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 27 - - 2006 - SINUMERIK 840 D

          Technical details
          max. wheel diameter 270 mm︱max. module 6,5 ︱min. module 1,5 ︱Control SINUMERIK 840 D ︱tooth width 58 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 180 ︱min. number of teeth 6 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱blade cutter head diameter 39 - 105 mm︱blade head turning speeds 1.500 U/min︱work piece spindle speed 1.500 U/min︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,70 x 2,10 x 2,10 m︱
          U - Axis The milling technique is Face Hobbing (Continuous) and Face Milling (Single Parting) Software for Gleason (conical teeth hight) PROMOT CELLMASTER without baskets / trolleys / Workpiece Grippers Only dry cutting No tools available No workpiece clamping devices available
            max. wheel diameter 270 mm
            max. module 6,5
            min. module 1,5
            Control SINUMERIK 840 D
            tooth width 58 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            blade cutter head diameter 39 - 105 mm
            blade head turning speeds 1.500 U/min
            work piece spindle speed 1.500 U/min
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m
            Description :
            U - Axis
            The milling technique is Face Hobbing (Continuous) and Face Milling (Single
            Parting)
            Software for Gleason (conical teeth hight)
            PROMOT CELLMASTER without baskets / trolleys / Workpiece Grippers
            Only dry cutting
            No tools available
            No workpiece clamping devices available

          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 27

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17294 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 27 - - 2004 - SINUMERIK 840 D

          Technical details
          max. wheel diameter 270 mm︱max. module 6,5 ︱min. module 1,5 ︱Control SINUMERIK 840 D ︱tooth width 58 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 180 ︱min. number of teeth 6 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱blade cutter head diameter 39 - 105 mm︱blade head turning speeds 1.500 U/min︱work piece spindle speed 1.500 U/min︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,70 x 2,10 x 2,10 m︱
          No U - Axis The milling technique used was Face Hobbing (Continuous) and Face Milling (Single Parting) The associated deburrer has deburred an edge on the heel and toe in a push action The promotional load has the AKR taken from a basket from the refill cell for the milling machine. After gear cutting, the component is removed from the machine and deburred from the load. Subsequently, the component is again stored in the restack cell in a basket.
            max. wheel diameter 270 mm
            max. module 6,5
            min. module 1,5
            Control SINUMERIK 840 D
            tooth width 58 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            blade cutter head diameter 39 - 105 mm
            blade head turning speeds 1.500 U/min
            work piece spindle speed 1.500 U/min
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m
            Description :
            No U - Axis
            The milling technique used was Face Hobbing (Continuous) and Face
            Milling
            (Single Parting)
            The associated deburrer has deburred an edge on the heel and toe in a push
            action
            The promotional load has the AKR taken from a basket from the refill cell for
            the milling machine. After gear cutting, the component is removed from the
            machine and deburred from the load. Subsequently, the component is again stored
            in the restack cell in a basket.

          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 27

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17296 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 27 - - 2004 - SINUMERIK 840 D

          Technical details
          max. wheel diameter 270 mm︱max. module 6,5 ︱min. module 1,5 ︱Control SINUMERIK 840 D ︱tooth width 58 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 180 ︱min. number of teeth 6 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱blade cutter head diameter 39 - 105 mm︱blade head turning speeds 1.500 U/min︱work piece spindle speed 1.500 U/min︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,70 x 2,10 x 2,10 m︱
          No U - Axis The milling technique used was Face Hobbing (Continuous) and Face Milling (Single Parting) The associated deburrer has deburred an edge on the heel and toe in a push action The promotional load has the AKR taken from a basket from the refill cell for the milling machine. After gear cutting, the component is removed from the machine and deburred from the load. Subsequently, the component is again stored in the restack cell in a basket.
            max. wheel diameter 270 mm
            max. module 6,5
            min. module 1,5
            Control SINUMERIK 840 D
            tooth width 58 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            blade cutter head diameter 39 - 105 mm
            blade head turning speeds 1.500 U/min
            work piece spindle speed 1.500 U/min
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m
            Description :
            No U - Axis
            The milling technique used was Face Hobbing (Continuous) and Face
            Milling
            (Single Parting)
            The associated deburrer has deburred an edge on the heel and toe in a push
            action
            The promotional load has the AKR taken from a basket from the refill cell for
            the milling machine. After gear cutting, the component is removed from the
            machine and deburred from the load. Subsequently, the component is again stored
            in the restack cell in a basket.

          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C27

          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland
          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02875 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C27 - - 2004 - Sinumerik 840D

          Technical details
          max. wheel diameter 270 mm︱gear width 58 mm︱max. module 6,5 ︱min. module 1,5 ︱Control Sinumerik 840D ︱tooth width 58 mm︱spiral angle 0 / 60 °︱max. number of teeth 180 ︱min. number of teeth 6 ︱transmission ratio max. 1:1 ︱transmission ratio min. 1:10 ︱blade cutter head diameter 39-105 mm︱blade head turning speeds 1500 U/min︱spindle speeds 1500 mm︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,7 x 2,1 x 2,1 m︱
          Equipment/ Accessories: - loading system Promot - deburring station - documentation
            max. wheel diameter 270 mm
            gear width 58 mm
            max. module 6,5
            min. module 1,5
            Control Sinumerik 840D
            tooth width 58 mm
            spiral angle 0 / 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio max. 1:1
            transmission ratio min. 1:10
            blade cutter head diameter 39-105 mm
            blade head turning speeds 1500 U/min
            spindle speeds 1500 mm
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,7 x 2,1 x 2,1 m
            Description :
            Equipment/ Accessories:

            - loading system Promot
            - deburring station
            - documentation
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 27

          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18016 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 27 - - 2004 -

          Technical details
          max. wheel diameter 270 mm︱gear width 58 mm︱max. module 6,5 ︱min. module 1,5 ︱total power requirement 40 kW︱weight of the machine ca. 11,2 t︱dimensions of the machine ca. 3,70 x 2,10 x 2,10 m︱
          max. wheel diameter 270 mm max. module 6,5 min. module 1,5 Control SINUMERIK 840 D tooth width 58 mm spiral angle min. 0 / max. 60 ° max. number of teeth 180 min. number of teeth 6 transmission ratio min. 1:1 transmission ratio max. 1:10 blade cutter head diameter 39 - 105 mm blade head turning speeds 1.500 U/min work piece spindle speed 1.500 U/min total power requirement 40 kW weight of the machine ca. 11,2 t dimensions of the machine ca. 3,70 x 2,10 x 2,10 m No U - Axis The milling technique used was Face Hobbing (Continuous) and Face Milling (Single Parting) The associated deburrer has deburred an edge on the heel and toe in a push action The promotional load has the AKR taken from a basket from the refill cell for the milling machine. After gear cutting, the component is removed from the machine and deburred from the load. Subsequently, the component is again stored in the restack cell in a basket.
            max. wheel diameter 270 mm
            gear width 58 mm
            max. module 6,5
            min. module 1,5
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m
            Description :
            max. wheel diameter 270 mm
            max. module 6,5
            min. module 1,5
            Control SINUMERIK 840 D
            tooth width 58 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 180
            min. number of teeth 6
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            blade cutter head diameter 39 - 105 mm
            blade head turning speeds 1.500 U/min
            work piece spindle speed 1.500 U/min
            total power requirement 40 kW
            weight of the machine ca. 11,2 t
            dimensions of the machine ca. 3,70 x 2,10 x 2,10 m

            No U - Axis
            The milling technique used was Face Hobbing (Continuous) and Face
            Milling
            (Single Parting)
            The associated deburrer has deburred an edge on the heel and toe in a push
            action
            The promotional load has the AKR taken from a basket from the refill cell for
            the milling machine. After gear cutting, the component is removed from the
            machine and deburred from the load. Subsequently, the component is again stored
            in the restack cell in a basket.
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P

          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland
          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03108 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0/60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 U/min︱total power requirement 100 kW︱weight of the machine ca. 16700 kg︱dimensions of the machine ca. 5200x2300x2400 mm︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0/60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 U/min
            total power requirement 100 kW
            weight of the machine ca. 16700 kg
            dimensions of the machine ca. 5200x2300x2400 mm
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17298 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - SINUMERIK 840 C

          Technical details
          max. wheel diameter 275 mm︱max. module 6 ︱min. module 1,5 ︱Control SINUMERIK 840 C ︱tooth width 5,5 mm︱spiral angle min. 0 / max. 60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱ratio of transmission 1:10 ︱min. ratio of transmission 1:1 ︱work piece spindle speed max. 110 U/min︱blade head turning speeds 20 - 110 U/min︱total power requirement 100 kW︱weight of the machine ca. 15,5 t︱dimensions of the machine ca. 5,20 x 2,30 x 2,40 m︱
            max. wheel diameter 275 mm
            max. module 6
            min. module 1,5
            Control SINUMERIK 840 C
            tooth width 5,5 mm
            spiral angle min. 0 / max. 60 °
            max. number of teeth 120
            min. number of teeth 5
            ratio of transmission 1:10
            min. ratio of transmission 1:1
            work piece spindle speed max. 110 U/min
            blade head turning speeds 20 - 110 U/min
            total power requirement 100 kW
            weight of the machine ca. 15,5 t
            dimensions of the machine ca. 5,20 x 2,30 x 2,40 m
            Description :

          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28P

          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18018 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28P - - 2002 - 840 C Siemens

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1 ︱Control 840 C Siemens︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1
            Control 840 C Siemens
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine OERLIKON C22

          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland
          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-16495 · Spiral Bevel Gear Cutting Machine

          OERLIKON - C22 - - 1999 - SINUMERIK 840 C

          Technical details
          max. wheel diameter 220 mm︱gear width 55 mm︱max. module 6,5 ︱min. module 1,5 ︱spindle turning speed - stepless 667 U/min︱number of teeth 6 - 120 ︱inserted tooth milling cutter dia. 124 - 220 mm︱workpiece spindle stepless 345 U/min︱spiral angle 0 - 60 °︱ratio of transmission 1 : 10 ︱min. ratio of transmission 1 : 1 ︱control SINUMERIK 840 C ︱total power requirement 10 kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 6,4 x 6,5 x 3,7 m︱
          Software Version COP V 5.16 Integrated deburring Parts loader system CELLMASTER was used only for spiral bevel gears Chip conveyor with integrated coolant system / pump Gleason and Klingelnberg method possible
            max. wheel diameter 220 mm
            gear width 55 mm
            max. module 6,5
            min. module 1,5
            spindle turning speed - stepless 667 U/min
            number of teeth 6 - 120
            inserted tooth milling cutter di. 124 - 220 mm
            workpiece spindle stepless 345 U/min
            spiral angle 0 - 60 °
            ratio of transmission 1 : 10
            min. ratio of transmission 1 : 1
            control SINUMERIK 840 C
            total power requirement 10 kW
            weight of the machine ca. 13 t
            dimensions of the machine ca. 6,4 x 6,5 x 3,7 m
            Description :
            Software Version COP V 5.16
            Integrated deburring
            Parts loader system CELLMASTER
            was used only for spiral bevel gears
            Chip conveyor with integrated coolant system / pump
            Gleason and Klingelnberg method possible

          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P

          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland
          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02824 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 1999 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱Control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0 / 60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 U/min︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m︱
          Euipment/ Accessories: - documentation
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            Control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0 / 60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 U/min
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m
            Description :
            Euipment/ Accessories:

            - documentation
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C22

          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-13122 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C22 - - 1999 -

          Technical details
          max. wheel diameter 220 mm︱gear width 55 mm︱max. module 6,5 ︱min. module 1,5 ︱spindle turning speed - stepless 667 U/min︱number of teeth 6 - 120 ︱inserted tooth milling cutter dia. 124 - 220 mm︱workpiece spindle stepless 345 U/min︱spiral angle 0 - 60 °︱ratio of transmission 1 : 10 ︱min. ratio of transmission 1 : 1 ︱total power requirement 10 kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 5,20 x 2,30 x 2,40 m︱
          integrated deburring unit
            max. wheel diameter 220 mm
            gear width 55 mm
            max. module 6,5
            min. module 1,5
            spindle turning speed - stepless 667 U/min
            number of teeth 6 - 120
            inserted tooth milling cutter di. 124 - 220 mm
            workpiece spindle stepless 345 U/min
            spiral angle 0 - 60 °
            ratio of transmission 1 : 10
            min. ratio of transmission 1 : 1
            total power requirement 10 kW
            weight of the machine ca. 13 t
            dimensions of the machine ca. 5,20 x 2,30 x 2,40 m
            Description :
            integrated deburring unit
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P

          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-18017 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 1999 - 840 C Siemens

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1 ︱Control 840 C Siemens︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1
            Control 840 C Siemens
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine OERLIKON Spiromatic S 17

          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland
          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17542 · Spiral Bevel Gear Cutting Machine

          OERLIKON - Spiromatic S 17 - - 1986 -

          Technical details
          max. wheel diameter 400 mm︱gear width 200 mm︱max. module 8,5 ︱min. module 1,5 ︱total power requirement 18 kW︱weight of the machine ca. 10,2 t︱dimensions of the machine ca. 4 x 4 m︱
          Working area: Diameter of ring gear at middle spiral elbow of 30° Max. 400 mm Module 1,5 - 8,5 mm Min. ratio of transmission 1:1 Max. ratio of transmission Ca. 1:10 Max. width of tooth face Ca. 60 mm External cone distance Ca. 205 mm Distance middle of the cone knife head axis 25 - 170 mm Distance middle of the cone knife head spindle shoulder 80 - 270 mm Distance middle of the cone working piece spindle shoulder 190 - 440 mm Number of revolutions of the knife head spindle 40 - 250 U/min. in standard steps Boring of the spindle 78 mm continuously Slewing range about the center of the machine -7° bis 90° Regulating range for Hypoid +/- 60 Recessing way 20 mm Regulating infeeds steady 0,04 - 25 mm/min 3 machines available
            max. wheel diameter 400 mm
            gear width 200 mm
            max. module 8,5
            min. module 1,5
            total power requirement 18 kW
            weight of the machine ca. 10,2 t
            dimensions of the machine ca. 4 x 4 m
            Description :
            Working area:
            Diameter of ring gear at middle spiral elbow of 30° Max. 400 mm
            Module 1,5 - 8,5 mm
            Min. ratio of transmission 1:1
            Max. ratio of transmission Ca. 1:10
            Max. width of tooth face Ca. 60 mm
            External cone distance Ca. 205 mm
            Distance middle of the cone knife head axis 25 - 170 mm
            Distance middle of the cone knife head spindle shoulder 80 - 270 mm
            Distance middle of the cone working piece spindle shoulder 190 - 440 mm
            Number of revolutions of the knife head spindle 40 - 250 U/min. in standard
            steps
            Boring of the spindle 78 mm continuously
            Slewing range about the center of the machine -7° bis 90°
            Regulating range for Hypoid +/- 60
            Recessing way 20 mm
            Regulating infeeds steady 0,04 - 25 mm/min

            3 machines available
          Datasheet
          Request / Contact
          used Gear cutting machines Spiral Bevel Gear Cutting Machine KLINGELNBERG AMK 400

          • Emuk Werkzeugmaschinen GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland
          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-17033 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - AMK 400 - - 1985 -

          Technical details
          max. wheel diameter 500 mm︱gear width 100 mm︱max. module 8,5 ︱min. module 1,5 ︱number of teeth 5 - 120 ︱toolpiece turning speed range max. 200 U/min︱plunge depth 50 mm︱total power requirement 35 kW︱weight of the machine ca. 14,5 t︱dimensions of the machine ca. 4750 x 2300 x 2600 mm m︱
          Exchange kit, coolant system, 3 sets of knives heads
            max. wheel diameter 500 mm
            gear width 100 mm
            max. module 8,5
            min. module 1,5
            number of teeth 5 - 120
            toolpiece turning speed range max. 200 U/min
            plunge depth 50 mm
            total power requirement 35 kW
            weight of the machine ca. 14,5 t
            dimensions of the machine ca. 4750 x 2300 x 2600 mm m
            Description :
            Exchange kit, coolant system,
            3 sets of knives heads
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   
          TOP Manufacturer:

          KLINGELNBERG - OERLIKON -

          компендіум
          програмне забезпечення
          Вміст старих машин
          недоторканність приватного життя
          Йди за нами
          © 2000 - 2021, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені