Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Surface Grinding Machine

          Machinelist: Surface Grinding Machine


          Surface Grinding Machine

          used Grinding machines Surface Grinding Machine ELB-SCHLIFF SWD20 VAI


          • SKM Industriemaschinen
          • Röntgenstr. 3
          • 89264 Weißenhorn
          • Deutschland

          • +49 (0) 7309 954 986 0
            +49 (0) 7309 954 986 1
          • info@skm-maschinen.de
            www.skm-maschinen.de
          #2032-1565 · Surface Grinding Machine

          ELB-SCHLIFF - SWD20 VAI - - unbekannt -

          Technical details
          grinding length 2000 mm︱grinding width 700 mm︱workpiece height 620 mm︱Control ︱total power requirement kW︱weight of the machine ca. 11,0 t︱dimensions of the machine ca. 6,2 x 2,9 x 2,9 m︱
          - Guides in good condition - Electric cabinet was overhauled in 2009 for the equivalent of € 16,000
            grinding length 2000 mm
            grinding width 700 mm
            workpiece height 620 mm
            weight of the machine ca. 11,0 t
            dimensions of the machine ca. 6,2 x 2,9 x 2,9 m
            Description :
            - Guides in good condition
            - Electric cabinet was overhauled in 2009 for the equivalent of € 16,000
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine CHEVALIER FSG-1640ADIII


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2287 · Surface Grinding Machine

          CHEVALIER - FSG-1640ADIII - - 2019 -

          Technical details
          610 mm︱ 1.000 x 400 mm︱ 1.015 x 405 x 610 mm︱ 400 x 1.000 mm︱ 1.050 mm︱ 1.100 mm︱ 3 - 32 mm︱ 420 mm︱ 3,7 kW︱ 1,5 kW︱ 1 kW︱ 1 kW︱ 355 x 50 x 127 mm︱ 6,3 kW︱ 4.280 mm︱ 1.730 mm︱ 2.080 mm︱ 3.500 kg︱
          8" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 610 mm table: 1.000 x 400 mm grinding area: 1.015 x 405 x 610 mm magnetic chuck: 400 x 1.000 mm table movement hydraulic: 1.050 mm table movement manual: 1.100 mm table speed: 5 - 25 m/min cross feed rapid travel: 0 - 2,250 m/min aut. cross feed incremental: 3 - 32 mm max. cross feed: 420 mm cross fine feed: 0,001 mm aut. feed: 0,001 - 0,04 mm rapid feed approx.: 675 mm/min fine feed: 0,001 mm spindle speed: 1.450 U/min spindle drive: 3,7 kW hydraulic drive: 1,5 kW cross feed drive: 1 kW elevating drive: 1 kW grinding wheel dimensions: 355 x 50 x 127 mm motor: 6,3 kW length: 4.280 mm width: 1.730 mm height: 2.080 mm weight: 3.500 kg
            610 mm
            1.000 x 400 mm
            1.015 x 405 x 610 mm
            400 x 1.000 mm
            1.050 mm
            1.100 mm
            3 - 32 mm
            420 mm
            3,7 kW
            1,5 kW
            1 kW
            1 kW
            355 x 50 x 127 mm
            6,3 kW
            4.280 mm
            1.730 mm
            2.080 mm
            3.500 kg
            Description :
            8" grafic NC-control on swiveling arm with touch screen for:
            - seletion of working mode, program creation, graphic condition control, alarm list
            aut. vertical feed
            servo drive for grinding wheel feed and table cross feed
            hardened slide ways in all 3 axes with needle rollers
            grinding wheel spindle on 4 high precision angular contact bearings
            electro-magnetic chuck
            coolant equiptment with aut. paper filter and magnetic separator
            autom. dressing attachment with diamond, with compensation device
            grinding wheel
            grinding wheel flange
            grinding wheel balancing scale
            balance arbor
            LED machine lamp
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH


            distance spindle-table: 610 mm
            table: 1.000 x 400 mm
            grinding area: 1.015 x 405 x 610 mm
            magnetic chuck: 400 x 1.000 mm
            table movement hydraulic: 1.050 mm
            table movement manual: 1.100 mm
            table speed: 5 - 25 m/min
            cross feed rapid travel: 0 - 2,250 m/min
            aut. cross feed incremental: 3 - 32 mm
            max. cross feed: 420 mm
            cross fine feed: 0,001 mm
            aut. feed: 0,001 - 0,04 mm
            rapid feed approx.: 675 mm/min
            fine feed: 0,001 mm
            spindle speed: 1.450 U/min
            spindle drive: 3,7 kW
            hydraulic drive: 1,5 kW
            cross feed drive: 1 kW
            elevating drive: 1 kW
            grinding wheel dimensions: 355 x 50 x 127 mm
            motor: 6,3 kW
            length: 4.280 mm
            width: 1.730 mm
            height: 2.080 mm
            weight: 3.500 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine CHEVALIER FSG-1224ADIII


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2283 · Surface Grinding Machine

          CHEVALIER - FSG-1224ADIII - - 2018 -

          Technical details
          610 mm︱ 600 x 300 mm︱ 610 x 305 x 610 mm︱ 300 x 600 mm︱ 650 mm︱ 700 mm︱ 3 - 32 mm︱ 320 mm︱ 3,7 kW︱ 1 kW︱ 1 kW︱ 355 x 50 x 127 mm︱ 5,6 kW︱ 2.950 mm︱ 1.490 mm︱ 2.080 mm︱ 2.200 kg︱
          8" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 610 mm table: 600 x 300 mm grinding area: 610 x 305 x 610 mm magnetic chuck: 300 x 600 mm table movement hydraulic: 650 mm table movement manual: 700 mm table speed: 5 - 25 m/min cross feed rapid travel: 0 - 2,250 m/min aut. cross feed incremental: 3 - 32 mm max. cross feed: 320 mm cross fine feed: 0,001 mm aut. feed: 0,001 - 0,04 mm rapid feed approx.: 675 mm/min fine feed: 0,001 mm spindle speed: 1.450 U/min spindle drive: 3,7 kW hydraulic drive: 0,74 kW cross feed drive: 1 kW elevating drive: 1 kW grinding wheel dimensions: 355 x 50 x 127 mm motor: 5,6 kW length: 2.950 mm width: 1.490 mm height: 2.080 mm weight: 2.200 kg
            610 mm
            600 x 300 mm
            610 x 305 x 610 mm
            300 x 600 mm
            650 mm
            700 mm
            3 - 32 mm
            320 mm
            3,7 kW
            1 kW
            1 kW
            355 x 50 x 127 mm
            5,6 kW
            2.950 mm
            1.490 mm
            2.080 mm
            2.200 kg
            Description :
            8" grafic NC-control on swiveling arm with touch screen for:
            - seletion of working mode, program creation, graphic condition control, alarm list
            aut. vertical feed
            servo drive for grinding wheel feed and table cross feed
            hardened slide ways in all 3 axes with needle rollers
            grinding wheel spindle on 4 high precision angular contact bearings
            electro-magnetic chuck
            coolant equiptment with aut. paper filter and magnetic separator
            man. extractor with diamond
            grinding wheel
            grinding wheel flange
            grinding wheel balancing scale
            balance arbor
            LED machine lamp
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH



            distance spindle-table: 610 mm
            table: 600 x 300 mm
            grinding area: 610 x 305 x 610 mm
            magnetic chuck: 300 x 600 mm
            table movement hydraulic: 650 mm
            table movement manual: 700 mm
            table speed: 5 - 25 m/min
            cross feed rapid travel: 0 - 2,250 m/min
            aut. cross feed incremental: 3 - 32 mm
            max. cross feed: 320 mm
            cross fine feed: 0,001 mm
            aut. feed: 0,001 - 0,04 mm
            rapid feed approx.: 675 mm/min
            fine feed: 0,001 mm
            spindle speed: 1.450 U/min
            spindle drive: 3,7 kW
            hydraulic drive: 0,74 kW
            cross feed drive: 1 kW
            elevating drive: 1 kW
            grinding wheel dimensions: 355 x 50 x 127 mm
            motor: 5,6 kW
            length: 2.950 mm
            width: 1.490 mm
            height: 2.080 mm
            weight: 2.200 kg
          36.500 €
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine SCHLEIFPOWER FSM 3060 AHD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1798 · Surface Grinding Machine

          SCHLEIFPOWER - FSM 3060 AHD - - 2017 -

          Technical details
          495 mm︱ 635 x 305 mm︱ 765 mm︱ 600 x 300 mm︱ 350 x 40 x 127 mm︱ 270 kg︱ 5,5 kW︱ 2.100 mm︱ 2.000 mm︱ 1.950 mm︱ 1.900 kg︱
          2-axes digital read-out aut. vertical feed by SIEMENS TD400C control (freely selectable feed order, rough grinding/fine grinding) grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed  automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 495 mm table: 635 x 305 mm longitudinal travel: 765 mm magnetic clamping plate: 600 x 300 mm spindle speed: 1.450 r.p.m. grinding wheel dimensions: 350 x 40 x 127 mm max. work piece weight: 270 kg spindle motor power: 5,5 kW length: 2.100 mm width: 2.000 mm height: 1.950 mm weight: 1.900 kg
            495 mm
            635 x 305 mm
            765 mm
            600 x 300 mm
            350 x 40 x 127 mm
            270 kg
            5,5 kW
            2.100 mm
            2.000 mm
            1.950 mm
            1.900 kg
            Description :
            2-axes digital read-out
            aut. vertical feed by SIEMENS TD400C control (freely selectable feed order, rough grinding/fine grinding)
            grinding wheel with flange
            wheel balance arbour
            electro-magnetic chuck
            hydraulic longitudinal feed
            automatic cross feed 
            automatic demagnetiser
            man. parallel wheel dressing device
            coolant device
            separate hydraulic unit
            aut. central lubrication
            dressing diamond
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH

            distance spindle-table: 495 mm
            table: 635 x 305 mm
            longitudinal travel: 765 mm
            magnetic clamping plate: 600 x 300 mm
            spindle speed: 1.450 r.p.m.
            grinding wheel dimensions: 350 x 40 x 127 mm
            max. work piece weight: 270 kg
            spindle motor power: 5,5 kW
            length: 2.100 mm
            width: 2.000 mm
            height: 1.950 mm
            weight: 1.900 kg
          14.560 €
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine SCHLEIFPOWER FSM 2550 AHD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-471 · Surface Grinding Machine

          SCHLEIFPOWER - FSM 2550 AHD - - 2015 -

          Technical details
          450 mm︱ 600 x 254 mm︱ 600 mm︱ 508 x 254 mm︱ 200 x 20 x 312 mm︱ 180 kg︱ 2,2 kW︱ 2.200 mm︱ 1.800 mm︱ 1.850 mm︱ 1.800 kg︱
          2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH distance spindle-table: 450 mm table: 600 x 254 mm longitudinal travel: 600 mm magnetic clamping plate: 508 x 254 mm spindle speed: 2.850 r.p.m. grinding wheel dim.: 200 x 20 x 312 mm max. work piece weight: 180 kg spindle motor power: 2,2 kW length: 2.200 mm width: 1.800 mm height: 1.850 mm weight: 1.800 kg
            450 mm
            600 x 254 mm
            600 mm
            508 x 254 mm
            200 x 20 x 312 mm
            180 kg
            2,2 kW
            2.200 mm
            1.800 mm
            1.850 mm
            1.800 kg
            Description :
            2-axes digital read-out
            grinding wheel with flange
            wheel balance arbour
            electro-magnetic chuck
            hydraulic longitudinal feed
            automatic cross feed
            automatic vertical feed
            automatic demagnetiser
            man. parallel wheel dressing device
            coolant device
            separate hydraulic unit
            aut. central lubrication
            dressing diamond
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH





            distance spindle-table: 450 mm
            table: 600 x 254 mm
            longitudinal travel: 600 mm
            magnetic clamping plate: 508 x 254 mm
            spindle speed: 2.850 r.p.m.
            grinding wheel dim.: 200 x 20 x 312 mm
            max. work piece weight: 180 kg
            spindle motor power: 2,2 kW
            length: 2.200 mm
            width: 1.800 mm
            height: 1.850 mm
            weight: 1.800 kg
          11.520 €
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine FSM FSM 3060


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05293 · Surface Grinding Machine

          FSM - FSM 3060 - - 2013 -

          Technical details
          serial number 16007635 x 305 mm︱automatic feeder ︱digital ︱output 5,5 kw︱weight of the machine ca. 1,9 t︱
            serial number 16007
            635 x 305 mm
            output 5,5 kw
            weight of the machine ca. 1,9 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine RSA Turnamat


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-SL288 · Surface Grinding Machine

          RSA - Turnamat - - 2002 -

          Technical details
          CNC brand - ︱CNC model - ︱Control -
          1500/3000 RPM For deburring the ends of iron tubes Max. tube diameter: 125 mm ø
            CNC brand -
            CNC model -
            Control -
            Description :
            1500/3000 RPM
            For deburring the ends of iron tubes
            Max. tube diameter: 125 mm ø
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine BLOHM PLANOMAT 608


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1541 · Surface Grinding Machine

          BLOHM - PLANOMAT 608 - - 2001 - ERGOMATIC

          Technical details
          grinding length 800 mm︱grinding width 600 mm︱workpiece height mm︱control ERGOMATIC ︱headstock: dist. table - spindle center 700 mm︱max. table load 800 kg︱Length movement of the table mm︱table clamping with additional space 1.200 x 600 mm︱table longitudinal travel 900 mm︱table speed 30-3.000/300-30.000 ︱adjustment of X-movement by soft key on control pa ︱guidance system pretensioned roller guide ︱table drive Servo-Motor with ball scr kW︱manual table adjustment via joystick on the contr ︱measuring system 0,001 mm rotatorisch ︱Y-axis - vertical adjustment of the grinding wheel ︱max. distance table to spindle centre 700 mm︱rapid traverse 3.750 m/min︱guidance system pretensioned roller guide ︱axis drive servo motor with ball scr
          BLOHM Grinding control ERGOMATIC Movable setup console in the middle of the machine: Electronic handwheels for conventional operation of the machine for axes Y and Z. Joy stick for the axes X and Z. Feed control per axis via potentiometer, also active during program run. Control panel on support arm on the right side of the machine: LC display, visible area 121 x 103 mm, with backlight Membrane keyboard with short-stroke keys for acknowledging recommended default values or for entry of freely selectable parameters with the following functions: - Loading position X and Z axis - Set or change reversing points during the program - Set zero points for Y and Z axis - Set safety position - Set grinding wheel data - Select dressing function Softkey for preselection measuring system metric / inch Info button for help texts and service instructions Display for operating hours and maintenance intervals Fixed programs for workshop-related, operator-friendly handling: - Reciprocating loops with automatic Y-feed - Longitudinal, circumferential and surface grinding with intermittent or continuous crossfeed and automatic Y positioning - Grinding wheel adjustment with handwheel or automatic - ECO loops with automatic Y positioning: 1st layer: plunge grinding "roughing" 2nd layer: Surface grinding "finishing" 3rd layer: surface grinding "fine finishing" Automatic Y positioning: 3 layers with dressing, 10 parameter sets for 10 delivery programs storable, allowance or finished dimension grinding preselectable. Dressing programs: - Straight dressing from the table with compensation by single diamond, foldable dressing unit. - face dressing with single diamond or foldable dressing unit. - Dressing with compensation by automatic straightening device. - Deep dressing with compensation by PEA-T100. Coolant cleaning equipment Coolant system with belt filter (tank capacity 1,400 l) consisting of: - Belt filter with a cleaning surface of 2.25 m² for a flow rate of 250 l / min - Supply pump 200 l / min, 4 bar - Additional pump for water trough flushing and rinsing gun - Cooling unit for coolant emulsion with max. 5% grinding concentrate - Power 4.9 kW (4,200 kcal / h), refrigerant CFC-free Equipment/Accessories - Basic machine with work enclosure closed at the top - Spindle drive 15 kW, frequency controlled - Manual balancing device MPM incl. Vibration sensor and speed sensor - Belt filter coolant cleaning system Tank capacity 1,400 liters - Pneumatically folding dressing unit - Electro-permanent magnetic clamping plate 800 x 600 mm, transverse pole pitch 4 mm, with 8-fold adhesion control - 2 pieces of grinding wheel flanges - 1 pc. balancing mandrel - Machine documentation incl. CE conformity declaration - Finish: RAL 5009 azure / RAL 9002 gray white Grinding spindle insert renewed 02-2016
            grinding length 800 mm
            grinding width 600 mm
            control ERGOMATIC
            headstock: dist. table - spindle. 700 mm
            max. table load 800 kg
            table clamping with additional s. 1.200 x 600 mm
            table longitudinal travel 900 mm
            table speed 30-3.000/300-30.000
            adjustment of X-movement by soft key on control pa
            guidance system pretensioned roller guide
            table drive Servo-Motor with ball scr kW
            manual table adjustment via joystick on the contr
            measuring system 0,001 mm rotatorisch
            max. distance table to spindle c. 700 mm
            rapid traverse 3.750 m/min
            guidance system pretensioned roller guide
            axis drive servo motor with ball scr
            Description :
            BLOHM Grinding control ERGOMATIC
            Movable setup console in the middle of the machine:
            Electronic handwheels for conventional operation of the machine for axes Y and
            Z.
            Joy stick for the axes X and Z.
            Feed control per axis via potentiometer, also active during program run.

            Control panel on support arm on the right side of the machine:
            LC display, visible area 121 x 103 mm, with backlight
            Membrane keyboard with short-stroke keys for acknowledging recommended default
            values or for entry of freely selectable parameters with the following
            functions:
            - Loading position X and Z axis
            - Set or change reversing points during the program
            - Set zero points for Y and Z axis
            - Set safety position
            - Set grinding wheel data
            - Select dressing function
            Softkey for preselection measuring system metric / inch
            Info button for help texts and service instructions
            Display for operating hours and maintenance intervals

            Fixed programs for workshop-related, operator-friendly handling:
            - Reciprocating loops with automatic Y-feed
            - Longitudinal, circumferential and surface grinding with intermittent or
            continuous crossfeed
            and automatic Y positioning
            - Grinding wheel adjustment with handwheel or automatic
            - ECO loops with automatic Y positioning:
            1st layer: plunge grinding "roughing"
            2nd layer: Surface grinding "finishing"
            3rd layer: surface grinding "fine finishing"
            Automatic Y positioning: 3 layers with dressing, 10 parameter sets for 10
            delivery programs storable, allowance or finished dimension grinding
            preselectable.

            Dressing programs:
            - Straight dressing from the table with compensation by single diamond,
            foldable dressing unit.
            - face dressing with single diamond or foldable dressing unit.
            - Dressing with compensation by automatic straightening device.
            - Deep dressing with compensation by PEA-T100.

            Coolant cleaning equipment

            Coolant system with belt filter (tank capacity 1,400 l) consisting of: - Belt
            filter with a cleaning surface of 2.25 m² for a flow rate of 250 l / min -
            Supply pump 200 l / min, 4 bar - Additional pump for water trough flushing and
            rinsing gun - Cooling unit for coolant emulsion with max. 5% grinding
            concentrate - Power 4.9 kW (4,200 kcal / h), refrigerant CFC-free

            Equipment/Accessories
            - Basic machine with work enclosure closed at the top
            - Spindle drive 15 kW, frequency controlled
            - Manual balancing device MPM incl. Vibration sensor and speed sensor
            - Belt filter coolant cleaning system Tank capacity 1,400 liters
            - Pneumatically folding dressing unit
            - Electro-permanent magnetic clamping plate 800 x 600 mm, transverse pole
            pitch 4 mm, with 8-fold adhesion control
            - 2 pieces of grinding wheel flanges
            - 1 pc. balancing mandrel
            - Machine documentation incl. CE conformity declaration
            - Finish: RAL 5009 azure / RAL 9002 gray white
            Grinding spindle insert renewed 02-2016
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ELB Perfekt 6 Dose


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05345 · Surface Grinding Machine

          ELB - Perfekt 6 Dose - - 2000 -

          Technical details
          serial number 4925501 ︱grinding range 600 - 400 - 475 mm︱spindle cone 36 mm︱ 350 x 600 mm︱filter unit
            serial number 4925501
            grinding range 600 - 400 - 475 mm
            spindle cone 36 mm
            350 x 600 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine OKAMOTO ACC-63-ST


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3476 · Surface Grinding Machine

          OKAMOTO - ACC-63-ST - - 2000 -

          Technical details
          350x40x127 mm︱ 605 mm︱ 300 mm︱ 500 mm︱ 750x300 mm︱ 600x300 mm︱ 750/340/300 mm︱ 290 mm︱ 420 kg︱ 3,7 kW︱ 2.630 mm︱ 1.900 mm︱ 1.770 mm︱ 1.900 kg︱
          automatic depth infeed wet grinding direction machine light diamond disc Ø 300 mm user manual in GERMAN according to CE regulations Grinding wheel: 350x40x127 mm Grinding length: 605 mm Grinding width: 300 mm Distance spindle-table: 500 mm Table clamping area: 750x300 mm Magnetic clamping plate: 600x300 mm Travel X / Y / Z: 750/340/300 mm Max. Workpiece height: 290 mm Max. Workpiece weight: 420 kg Spindle speed: 1.500 rpm. Feed: 0.002-0.03 mm / pulse Vertical entrance: 400 mm / min Motor power: 3,7 kW Length: 2.630 mm Width: 1.900 mm Height: 1.770 mm Weight: 1.900 kg
            350x40x127 mm
            605 mm
            300 mm
            500 mm
            750x300 mm
            600x300 mm
            750/340/300 mm
            290 mm
            420 kg
            3,7 kW
            2.630 mm
            1.900 mm
            1.770 mm
            1.900 kg
            Description :
            automatic depth infeed
            wet grinding direction
            machine light
            diamond disc Ø 300 mm
            user manual in GERMAN
            according to CE regulations




            Grinding wheel: 350x40x127 mm
            Grinding length: 605 mm
            Grinding width: 300 mm
            Distance spindle-table: 500 mm
            Table clamping area: 750x300 mm
            Magnetic clamping plate: 600x300 mm
            Travel X / Y / Z: 750/340/300 mm
            Max. Workpiece height: 290 mm
            Max. Workpiece weight: 420 kg
            Spindle speed: 1.500 rpm.
            Feed: 0.002-0.03 mm / pulse
            Vertical entrance: 400 mm / min
            Motor power: 3,7 kW
            Length: 2.630 mm
            Width: 1.900 mm
            Height: 1.770 mm
            Weight: 1.900 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GEIBEL & HOTZ FS 60 AC


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18149 · Surface Grinding Machine

          GEIBEL & HOTZ - FS 60 AC - - 1999 - conv.

          Technical details
          grinding length 600 mm︱grinding width 350 mm︱distance spindle center to table 525 mm︱magnetic clamping plate 600 x 350 mm︱max. table load 400 kg︱table adjustment - longitudinal 660 mm︱table speeds 2 - 28 m/min︱cross travel 360 mm︱grinding wheel size 300 x 50 x 76,2 mm︱Clamping width 30 mm︱driving power - grinding spindle 3,7 kW︱Control conv. ︱total power requirement 8 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 4,5 x 3,0 x 2,4 m︱
          - Coolant with Paperbandfilter - Documentation
            grinding length 600 mm
            grinding width 350 mm
            distance spindle center to table 525 mm
            magnetic clamping plate 600 x 350 mm
            max. table load 400 kg
            table adjustment - longitudinal 660 mm
            table speeds 2 - 28 m/min
            cross travel 360 mm
            grinding wheel size 300 x 50 x 76,2 mm
            Clamping width 30 mm
            driving power - grinding spindle 3,7 kW
            Control conv.
            total power requirement 8 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 4,5 x 3,0 x 2,4 m
            Description :
            - Coolant with Paperbandfilter
            - Documentation
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine BLOHM Planomat 412


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05344 · Surface Grinding Machine

          BLOHM - Planomat 412 - - 1998 -

          Technical details
          serial number 14542 ︱grinding width 1.200 - 400 - 500 mm︱table-size 400 x 1.200 mm︱table speeds 0,3 - 30 m/min︱filter unit ︱weight of the machine ca. 6 t︱
            serial number 14542
            grinding width 1.200 - 400 - 500 mm
            table-size 400 x 1.200 mm
            table speeds 0,3 - 30 m/min
            weight of the machine ca. 6 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GEIBEL & HOTZ FS 60 AC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8393 · Surface Grinding Machine

          GEIBEL & HOTZ - FS 60 AC - - 1998 - conv.

          Technical details
          grinding length max. 600 mm︱grinding width max. 350 mm︱Control conv. ︱distance spindle center to table max. 525 mm︱magnetic clamping plate 600 x 350 mm︱max. table load 400 kg︱table adjustment - longitudinal 660 mm︱table speeds 2 - 28 m/min︱cross travel 360 mm︱grinding wheel size max. 300 x 50 x 76,2 mm︱Clamping width max. 30 mm︱driving power - grinding spindle 3,7 kW︱total power requirement 8 kW︱weight of the machine ca. 2,1 t︱dimensions of the machine ca. 4,5 x 3,0 x 2,4 m︱Documents
          Surface-Grindingmachine GEIBEL & HOTZ - FS 60 AC
            grinding length max. 600 mm
            grinding width max. 350 mm
            Control conv.
            distance spindle center to table max. 525 mm
            magnetic clamping plate 600 x 350 mm
            max. table load 400 kg
            table adjustment - longitudinal 660 mm
            table speeds 2 - 28 m/min
            cross travel 360 mm
            grinding wheel size max. 300 x 50 x 76,2 mm
            Clamping width max. 30 mm
            driving power - grinding spindle 3,7 kW
            total power requirement 8 kW
            weight of the machine ca. 2,1 t
            dimensions of the machine ca. 4,5 x 3,0 x 2,4 m
            Description :
            Surface-Grindingmachine
            GEIBEL & HOTZ - FS 60 AC
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ZIERSCH & BALTRUSCH Starline 800


          • STEINHAND GmbH
          • Wiehagen 10
          • 45472 Mülheim a.d. Ruhr
          • Deutschland

          • +49 (0) 208 / 444 865 01
            +49 (0) 208 / 444 865 29
          • info@steinhand.de
            www.steinhand.de
          #2026-1139 · Surface Grinding Machine

          ZIERSCH & BALTRUSCH - Starline 800 - - 1995 - Siemens 805

          Technical details
          grinding wheel diameter 300 mm︱grinding wheel width max. 50 mm︱grinding wheel hole 76,2 mm︱control Siemens 805 ︱capacity X-axis 800 mm︱capacity Y-axis 600 mm︱capacity Z-axis 300 mm︱ 600 x 300 mm︱
          Further information: - Maintenance was carried out by Deyle Maschinenservice. - swivel dresser for dressing all kind of forms - Documentation is available Equipment: - grinding wheel holders - grinding wheels The machine has worked in a Swiss factory and is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Starline800 | Starline-800
            grinding wheel diameter 300 mm
            grinding wheel width max. 50 mm
            grinding wheel hole 76,2 mm
            control Siemens 805
            capacity X-axis 800 mm
            capacity Y-axis 600 mm
            capacity Z-axis 300 mm
            600 x 300 mm
            Description :
            Further information:

            - Maintenance was carried out by Deyle Maschinenservice.
            - swivel dresser for dressing all kind of forms
            - Documentation is available

            Equipment:

            - grinding wheel holders
            - grinding wheels

            The machine has worked in a Swiss factory
            and is in good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: Starline800 | Starline-800
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GER RS15/60


          • ATMH Werkzeugmaschinenhandel GmbH
          • Scharpenbergerstr.96-98
          • 58256 Ennepetal
          • Deutschland

          • +49 (0) 2333 / 403 43 70
            +49 (0) 2333 / 403 43 75
          • info@atmh.de
            www.atmh.de
          #2065-A1779 · Surface Grinding Machine

          GER - RS15/60 - - 1994 - Siemens 810 D

          Technical details
          travel -x axis 1600 mm︱travel -y axis 400 mm︱travel -z axis 700 mm︱control Siemens 810 D ︱weight of the machine ca. 8,1 t︱
          Clamping magnet (X / Z): 1,500 / 675 mm Travel range (X): 1,600 mm Travel range (Z): 700 mm Travel range (Y): 400 mm Year of construction: 1994 Control: Siemens 810 D. Weight: approx. 8.100 kg
            travel -x axis 1600 mm
            travel -y axis 400 mm
            travel -z axis 700 mm
            control Siemens 810 D
            weight of the machine ca. 8,1 t
            Description :
            Clamping magnet (X / Z): 1,500 / 675 mm
            Travel range (X): 1,600 mm
            Travel range (Z): 700 mm
            Travel range (Y): 400 mm
            Year of construction: 1994
            Control: Siemens 810 D.
            Weight: approx. 8.100 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ELB OPTIMAL 4250 NC-K


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-02617 · Surface Grinding Machine

          ELB - OPTIMAL 4250 NC-K - - 1993 -

          Technical details
          grinding length 450 mm︱grinding width 250 mm︱workpiece height 375 mm︱table length 800 mm︱table width 250 mm︱max. workpiece weight 400 kg︱automatic cross feed adjustable 3-50 mm/Hub︱vertical adjustment, 1 graduation 0.001 - 0.06 mm︱grinding wheel diameter 300 mm︱grinding wheel width 50 mm︱ 36 mm︱connected load frequency 380 V︱grinding wheel motor 3.7 / 4.7 kW︱total power requirement 9 kW︱weight of the machine ca. 2.6 t︱dimensions of the machine ca. 2800 X 2500 2300 mm︱
            grinding length 450 mm
            grinding width 250 mm
            workpiece height 375 mm
            table length 800 mm
            table width 250 mm
            max. workpiece weight 400 kg
            automatic cross feed adjustable 3-50 mm/Hub
            vertical adjustment, 1 graduatio. 0.001 - 0.06 mm
            grinding wheel diameter 300 mm
            grinding wheel width 50 mm
            36 mm
            connected load frequency 380 V
            grinding wheel motor 3.7 / 4.7 kW
            total power requirement 9 kW
            weight of the machine ca. 2.6 t
            dimensions of the machine ca. 2800 X 2500 2300 mm
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine Hunger S330


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-SL187 · Surface Grinding Machine

          Hunger - S330 - - 1993 -

          Technical details
          CNC brand - ︱CNC model - ︱Control -
          Brake shoe grinding machine for trucks
            CNC brand -
            CNC model -
            Control -
            Description :
            Brake shoe grinding machine for trucks

          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine GEIBEL + HOTZ FS 60 Compact


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3328 · Surface Grinding Machine

          GEIBEL + HOTZ - FS 60 Compact - - 1993 -

          Technical details
          525 mm︱ 660 x 360 mm︱ 600 x 350 mm︱ 300 x 50 x 76,2 mm︱ 400 kg︱ 3,7 kW︱ 8 kW︱ x. 30 ma mm︱ 4.500 mm︱ 3.000 mm︱ 2.400 mm︱ 2.100 kg︱
          control conv. puller new pulling diamond user manual in GERMAN Comply with the present industrial safety regulations (AMVO & UVV) distance spindle-table: 525 mm table: 660 x 360 mm magnetic clamping plate: 600 x 350 mm table speed: 2-28 m/min grinding wheel dim.: 300 x 50 x 76,2 mm max. work piece weight: 400 kg spindle motor power: 3,7 kW machine motor power ca.: 8 kW length: 4.500 mm width: 3.000 mm height: 2.400 mm weight: 2.100 kg
            525 mm
            660 x 360 mm
            600 x 350 mm
            300 x 50 x 76,2 mm
            400 kg
            3,7 kW
            8 kW
            x. 30 ma mm
            4.500 mm
            3.000 mm
            2.400 mm
            2.100 kg
            Description :
            control conv.
            puller
            new pulling diamond
            user manual in GERMAN
            Comply with the present industrial safety regulations (AMVO & UVV)

            distance spindle-table: 525 mm
            table: 660 x 360 mm
            magnetic clamping plate: 600 x 350 mm
            table speed: 2-28 m/min
            grinding wheel dim.: 300 x 50 x 76,2 mm
            max. work piece weight: 400 kg
            spindle motor power: 3,7 kW
            machine motor power ca.: 8 kW
            length: 4.500 mm
            width: 3.000 mm
            height: 2.400 mm
            weight: 2.100 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine JAKOBSEN SJ 824


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-724861 · Surface Grinding Machine

          JAKOBSEN - SJ 824 - - 1992 -

          Technical details
          grinding length 600 mm︱grinding width 250 mm︱workpiece height 350 mm︱total power requirement 4,5 kW︱weight of the machine ca. 2100 kg︱dimensions of the machine ca. m︱
            grinding length 600 mm
            grinding width 250 mm
            workpiece height 350 mm
            total power requirement 4,5 kW
            weight of the machine ca. 2100 kg
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine sit RP 800


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03191 · Surface Grinding Machine

          sit - RP 800 - - 1991 -

          Technical details
          grinding length 800 mm︱grinding width 400 mm︱workpiece height 475 mm︱table length 1100 mm︱table width 500 mm︱max. workpiece weight 700 kg︱automatic cross feed adjustable 3-50 mm/Hub︱vertical adjustment, 1 graduation 0.001 - 0.06 mm︱grinding wheel diameter 300 mm︱grinding wheel width 50 mm︱ 76.2 mm︱connected load frequency 380 V︱grinding wheel motor 3.7 / 4.5 kW︱total power requirement 4.5 kW︱weight of the machine ca. 4.5 t︱dimensions of the machine ca. 3500x2000x2700 mm︱
          NICE MACHINE 800 X 400 AUTOMATIQUE
            grinding length 800 mm
            grinding width 400 mm
            workpiece height 475 mm
            table length 1100 mm
            table width 500 mm
            max. workpiece weight 700 kg
            automatic cross feed adjustable 3-50 mm/Hub
            vertical adjustment, 1 graduatio. 0.001 - 0.06 mm
            grinding wheel diameter 300 mm
            grinding wheel width 50 mm
            76.2 mm
            connected load frequency 380 V
            grinding wheel motor 3.7 / 4.5 kW
            total power requirement 4.5 kW
            weight of the machine ca. 4.5 t
            dimensions of the machine ca. 3500x2000x2700 mm
            Description :
            NICE MACHINE
            800 X 400 AUTOMATIQUE
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine ABA FUW 750 CNC


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00749 · Surface Grinding Machine

          ABA - FUW 750 CNC - - 1991 - Siemens 810

          Technical details
          grinding length 750 mm︱grinding width 300 mm︱workpiece height 730 mm︱Control Siemens 810 ︱total power requirement 29 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 5 x 3,7 x 2,42 m︱
            grinding length 750 mm
            grinding width 300 mm
            workpiece height 730 mm
            Control Siemens 810
            total power requirement 29 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 5 x 3,7 x 2,42 m
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine MARTA MF 60-30


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04916 · Surface Grinding Machine

          MARTA - MF 60-30 - - 1988 -

          Technical details
          grinding length 600 mm︱grinding width 300 mm︱filter unit ︱weight of the machine ca. 2,4 t︱
            grinding length 600 mm
            grinding width 300 mm
            weight of the machine ca. 2,4 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine WMW SFW 200-600


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04649 · Surface Grinding Machine

          WMW - SFW 200-600 - - 1987 -

          Technical details
          200 x 400 mm︱weight of the machine ca. 1,1 t︱
            200 x 400 mm
            weight of the machine ca. 1,1 t
          Datasheet
          Request / Contact
          used Grinding machines Surface Grinding Machine Unicum


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Niederlande

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-SL182 · Surface Grinding Machine

          Unicum - - - 1987 -

          Technical details
          Grinding wheel diameter 200 mm ø︱Table length 300 mm︱Table width 160 mm︱
          Swivel grinder Water cooled
            Grinding wheel diameter 200 mm ø
            Table length 300 mm
            Table width 160 mm
            Description :
            Swivel grinder
            Water cooled
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Surface grinding machines with LagerMaschinen
          LagerMaschinen's used surface grinding machines

          Finding the right machine for your business can be difficult. Whether you're just starting up a small company or hoping to expand production purchasing new machinery for your factory floor can be a daunting - and expensive - task. LagerMaschinen's online platform international selection and delivery and installation services can help make this transition seamless as well as practically priced. This unique solution bypasses the complicated and sometimes overwhelming process of buying a new machine directly on the market. Much like purchasing a new vehicle purchasing a new machine can be overwhelming. Used machines are not only more financially sound but also come with the knowledge the seller will impart to you. When searching for surface grinding machines there are many specifications to be met.

          Find which of our surface grinding machines is right for you.

          Surface grinding machines are used in many different types of industry. These large-scale machines level out a surface until it is smooth and flat. In the case of woodworking the wood is then ready for varnishing. Both horizontal and vertical surface grinding machines are available through LagerMaschinen as well as various disc grinders. You can also search for equipment and accessories for your surface grinding machines on LagerMaschinen: replacement grinding wheels water-based and petroleum-based cutting fluids. These items are best found on a platform of professionals who can offer help and advice and possibly sell you your next machine. Find the next addition to your factory floor on LagerMaschinen today and make not only a wise financial choice but network with others in your field simultaneously.