Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          CNC Turning- and Milling Center

          Machinelist: CNC Turning- and Milling Center


          CNC Turning- and Milling Center

          used Lathes CNC Turning- and Milling Center GMTK HR-Baureihe


          • JMT Juaristi Machine Tools GmbH & Co. KG
          • Sterkrader Venn 8
          • 46145 Oberhausen
          • Deutschland

          • 0208 6294710
            0208 62947120
          • info@jmt-werkzeugmaschinen.de
            www.jmt-werkzeugmaschinen.de
          #4005-12 · CNC Turning- and Milling Center

          GMTK - HR-Baureihe - - NEU - SIEMENS 840D

          Technical details
          turning diameter mm︱turning length mm︱control 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱


        • JMT Juaristi Machine Tools GmbH & Co. KG
        • Sterkrader Venn 8
        • 46145 Oberhausen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GMTK VR-Baureihe


          • JMT Juaristi Machine Tools GmbH & Co. KG
          • Sterkrader Venn 8
          • 46145 Oberhausen
          • Deutschland

          • 0208 6294710
            0208 62947120
          • info@jmt-werkzeugmaschinen.de
            www.jmt-werkzeugmaschinen.de
          #4005-13 · CNC Turning- and Milling Center

          GMTK - VR-Baureihe - - NEU - SIEMENS 840D

          Technical details
          turning diameter mm︱turning length mm︱control 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱


        • JMT Juaristi Machine Tools GmbH & Co. KG
        • Sterkrader Venn 8
        • 46145 Oberhausen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER Sprint 32-8 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8958 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 32-8 linear - - 2021 - Fanuc 32i-B

          Technical details
          turning diameter max. 32 mm︱turning length Z2: 200 mm︱control Fanuc 32i-B ︱Main spindle: ︱Max. rpm 8.500 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱max. Torque 52 Nm︱max. usable bar diameter 32 mm︱C - Axis 360 °︱slide I: ︱x-travel 1: 70 mm︱y-travel 1: 405 mm︱z-travel 1: 100 (240) mm︱Tooling 6 / 4 pos.︱fixed tool stations 6 ︱driven statition 4 ︱outer processing 6 ︱inner processing 4 + 4 ︱Shank diameter 16 x 16 mm︱Drill shank diameter 25 mm︱
          CNC-High-Performance Turning- and Millingcenter GILDEMEISTER - Sprint 32-8 linear - TOP-Zustand! - Only 110h Spindle-Hours! - Axis: 6+2 - Main- and Subspindle - tool drive - 2 C-Axis
            turning diameter max. 32 mm
            turning length Z2: 200 mm
            control Fanuc 32i-B
            Max. rpm 8.500 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            max. Torque 52 Nm
            max. usable bar diameter 32 mm
            C - Axis 360 °
            x-travel 1: 70 mm
            y-travel 1: 405 mm
            z-travel 1: 100 (240) mm
            Tooling 6 / 4 pos.
            fixed tool stations 6
            driven statition 4
            outer processing 6
            inner processing 4 + 4
            Shank diameter 16 x 16 mm
            Drill shank diameter 25 mm
            Description :
            CNC-High-Performance Turning- and Millingcenter
            GILDEMEISTER - Sprint 32-8 linear

            - TOP-Zustand!
            - Only 110h Spindle-Hours!
            - Axis: 6+2
            - Main- and Subspindle
            - tool drive
            - 2 C-Axis


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OPTIMUM OPTIturn S 600 CNC


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8702 · CNC Turning- and Milling Center

          OPTIMUM - OPTIturn S 600 CNC - - 2021 - Sinumerik 828D Siemens

          Technical details
          turning diameter max. 500 mm︱turning length 460 mm︱control Sinumerik 828D Siemens︱greates pass round over bed 500 mm︱Swing dia. over traverse guideway 220 mm︱standard turning dia. 215 mm︱Main spindle: ︱turning speed range - main spindle 10 - 4.000 min/-1︱power capacity - main spindel 30 / 12 kW︱max. Torque 250 / 115 Nm︱C-Axis 360 °︱spindle taper DIN 55026 / A2-6 ︱spindle bore 75 mm︱max. usable bar diameter 65 mm︱chucking diameter 215 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱tool taper VDI 30 ︱Shank diameter 25 x 25 mm︱
          CNC-Turning- and MillingCenter OPTIMUM - OPTIturn S 600 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - C-Axis - Tool-Drive - alternative configuration available, optional and on request !
            turning diameter max. 500 mm
            turning length 460 mm
            control Sinumerik 828D Siemens
            greates pass round over bed 500 mm
            Swing dia. over traverse guidewa. 220 mm
            standard turning dia. 215 mm
            turning speed range - main spind. 10 - 4.000 min/-1
            power capacity - main spindel 30 / 12 kW
            max. Torque 250 / 115 Nm
            C-Axis 360 °
            spindle taper DIN 55026 / A2-6
            spindle bore 75 mm
            max. usable bar diameter 65 mm
            chucking diameter 215 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            tool taper VDI 30
            Shank diameter 25 x 25 mm
            Description :
            CNC-Turning- and MillingCenter
            OPTIMUM - OPTIturn S 600 CNC

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - C-Axis
            - Tool-Drive

            - alternative configuration available, optional and on request !


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2500 / 700


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19389 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 / 700 - - 2019 - MAPPS M730UM CELOS

          Technical details
          turning diameter 460 mm︱turning length 728 mm︱control MAPPS M730UM CELOS︱greates pass round over bed 590 mm︱Swing dia. over traverse guideway 360 mm︱Main spindle: ︱turning speed range - main spindle 10 - 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱max. Torque 599 Nm︱spindle nose JIS A2-8 DIN 55026︱chucking diameter 254 mm︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱max. usable bar diameter 80 mm︱C-Axis 0,001 °︱axis stroke: ︱x-travel 260 mm︱z-travel 795 mm︱C-Axis 360 °︱turret:
          CNC turning and milling center - CNC control Mapps M730M / Celos - Main spindle ISM 80 - Kitagawa 3 jaw chuck dia 254mm - C axis - Tool turret 12-fold - Tailstock - High pressure cooling 800W - chip conveyor - measuring arm - approx. 12050 hours switched on and approx. 1500 hours running
            turning diameter 460 mm
            turning length 728 mm
            control MAPPS M730UM CELOS
            greates pass round over bed 590 mm
            Swing dia. over traverse guidewa. 360 mm
            turning speed range - main spind. 10 - 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            max. Torque 599 Nm
            spindle nose JIS A2-8 DIN 55026
            chucking diameter 254 mm
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            max. usable bar diameter 80 mm
            C-Axis 0,001 °
            x-travel 260 mm
            z-travel 795 mm
            C-Axis 360 °
            Description :
            CNC turning and milling center
            - CNC control Mapps M730M / Celos
            - Main spindle ISM 80
            - Kitagawa 3 jaw chuck dia 254mm
            - C axis
            - Tool turret 12-fold
            - Tailstock
            - High pressure cooling 800W
            - chip conveyor
            - measuring arm
            -
            approx. 12050 hours switched on and approx. 1500 hours running


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DOOSAN PUMA 2600 LY II


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19393 · CNC Turning- and Milling Center

          DOOSAN - PUMA 2600 LY II - - 2019 - FANUC 0iT

          Technical details
          turning diameter 376 mm︱turning length 1280 mm︱control FANUC 0iT ︱greates pass round over bed 780 mm︱swing diameter over slide rest 630 mm︱max. turning diameter 376 mm︱spindle turning speed range 4000 U/min︱spindle drive motor 22/15 kW︱spindle nose ASA A2-8 ︱spindle bearing diameter 140 mm︱spindle bore 91 mm︱bar material dia. 76 mm︱c-axis 0,001 °︱chucking diameter 255 mm︱Number of tools 12 St.︱travel -x axis 260 mm︱travel -z axis 1350 mm︱travel -y axis 105 (+/- 52,5) mm︱tail stock ︱tailstock quill diameter 100 mm︱
          6 - axes CNC - Milling / turning centre - CNC control Fanuc F0iT and workshop oriented programming support Manual Guide i - C1/C2 axis 360° (0,001°) - Main & counter spindle with hydraulic power chuck (255 / 175mm) and hydraulic power clamping cylinder - 12-position turret with driven tools 5000 rpm, 7.5/1.5KW - Tool holder initial equipment, consisting of: -- 1 piece external turning holder -- 1 piece facing toolholder -- 1 piece double external turning holder -- 1 piece parting-off holder -- 2 pieces drill holder -- 1 piece cover cap (main) -- 1 piece double drill holder -- 2 pieces cover caps (Sub) -- 2 pieces driven units X with external coolant supply -- 3 pieces driven units Z with external coolant supply, Long -- 2 sets of drill sleeves -- 2 sets of cylindrical reducing sleeves -- 3 milling inserts: 1 cutter arbor, 1 Weldon, 1 collet chuck Operating hours: under 100 h
            turning diameter 376 mm
            turning length 1280 mm
            control FANUC 0iT
            greates pass round over bed 780 mm
            swing diameter over slide rest 630 mm
            max. turning diameter 376 mm
            spindle turning speed range 4000 U/min
            spindle drive motor 22/15 kW
            spindle nose ASA A2-8
            spindle bearing diameter 140 mm
            spindle bore 91 mm
            bar material dia. 76 mm
            c-axis 0,001 °
            chucking diameter 255 mm
            Number of tools 12 St.
            travel -x axis 260 mm
            travel -z axis 1350 mm
            travel -y axis 105 (+/- 52,5) mm
            tailstock quill diameter 100 mm
            Description :
            6 - axes CNC - Milling / turning centre
            - CNC control Fanuc F0iT and workshop oriented programming support
            Manual Guide i
            - C1/C2 axis 360° (0,001°)
            - Main & counter spindle with hydraulic power chuck (255 / 175mm) and
            hydraulic power clamping cylinder
            - 12-position turret with driven tools 5000 rpm, 7.5/1.5KW
            - Tool holder initial equipment, consisting of:
            -- 1 piece external turning holder
            -- 1 piece facing toolholder
            -- 1 piece double external turning holder
            -- 1 piece parting-off holder
            -- 2 pieces drill holder
            -- 1 piece cover cap (main)
            -- 1 piece double drill holder
            -- 2 pieces cover caps (Sub)
            -- 2 pieces driven units X with external coolant supply
            -- 3 pieces driven units Z with external coolant supply, Long
            -- 2 sets of drill sleeves
            -- 2 sets of cylindrical reducing sleeves
            -- 3 milling inserts: 1 cutter arbor, 1 Weldon, 1 collet chuck

            Operating hours: under 100 h


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 800


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-033890 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 800 - - 2017 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter max. 410 mm︱turning length 800 mm︱control Sinumerik 840D sl Siemens︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5.000 min/-1︱power capacity - main spindel 34 / 25 kW︱max. Torque 580 Nm︱C-Axis 360 °︱spindle nose 220h5 ︱chucking diameter 250 mm︱max. bar capacity 76 mm︱turret: ︱number of toolpositions 12 pos.︱Number of driven toolspositions 12 pos.︱power capacity driven tool-stations 14,2 kW︱Spindle speed - driven tool stations 40 - 10.000 min -1︱tool taper VDI 40 DIN69880︱max. Torque 34 Nm︱axis stroke:
          CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 - Sinumerik Operate und ShopTurn 3G - Spindle ISM 76 - Y-Axis - WITH Tools + SUP SPINDEL
            turning diameter max. 410 mm
            turning length 800 mm
            control Sinumerik 840D sl Siemens
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5.000 min/-1
            power capacity - main spindel 34 / 25 kW
            max. Torque 580 Nm
            C-Axis 360 °
            spindle nose 220h5
            chucking diameter 250 mm
            max. bar capacity 76 mm
            number of toolpositions 12 pos.
            Number of driven toolspositions 12 pos.
            power capacity driven tool-stati. 14,2 kW
            Spindle speed - driven tool stat. 40 - 10.000 min -1
            tool taper VDI 40 DIN69880
            max. Torque 34 Nm
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CTX beta 800

            - Sinumerik Operate und ShopTurn 3G
            - Spindle ISM 76
            - Y-Axis
            - WITH Tools
            + SUP SPINDEL



        • FIMOTEC
        • 20 RUE AMPERE
        • 67500 HAGUENAU
        • Frankreich

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center HYUNDAI WIA L 230 LMA


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8897 · CNC Turning- and Milling Center

          HYUNDAI WIA - L 230 LMA - - 2017 - Sinumerik 828D Siemens

          Technical details
          turning diameter 230 mm︱turning length 521 mm︱control Sinumerik 828D Siemens︱swing diameter max. 600 mm︱Main spindle: ︱turning speed range - main spindle 1 - 4.000 min/-1︱power capacity - main spindel 15 / 11 kW︱max. Torque 286 Nm︱max. usable bar diameter 65 mm︱C-Axis 0,001 °︱chucking diameter max. 210 mm︱spindle nose A2-6 ︱turret: ︱number of toolpositions 12 pos.︱driven statition 12 pos.︱Spindle speed - driven tools 1 - 5.000 min -1︱power capacity - driven tools 3,7 / 2,2 kW︱tool taper BMT 55 ︱axis stroke: ︱x-axis 220 mm︱
          CNC - Turning- and Millingcenter HYUNDAI WIA - L 230 LMA - ShopMill 3D - BarFeeder
            turning diameter 230 mm
            turning length 521 mm
            control Sinumerik 828D Siemens
            swing diameter max. 600 mm
            turning speed range - main spind. 1 - 4.000 min/-1
            power capacity - main spindel 15 / 11 kW
            max. Torque 286 Nm
            max. usable bar diameter 65 mm
            C-Axis 0,001 °
            chucking diameter max. 210 mm
            spindle nose A2-6
            number of toolpositions 12 pos.
            driven statition 12 pos.
            Spindle speed - driven tools 1 - 5.000 min -1
            power capacity - driven tools 3,7 / 2,2 kW
            tool taper BMT 55
            x-axis 220 mm
            Description :
            CNC - Turning- and Millingcenter
            HYUNDAI WIA - L 230 LMA

            - ShopMill 3D
            - BarFeeder



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2500 SY / 700


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8928 · CNC Turning- and Milling Center

          DMG MORI - NLX 2500 SY / 700 - - 2016 - M730 UM MAPPS CELOS

          Technical details
          turning diameter max. 356 mm︱turning length 705 mm︱control M730 UM MAPPS CELOS︱greates pass round over bed 920 mm︱Swing dia. over traverse guideway 742 mm︱Main spindle: ︱turning speed range - main spindle 4.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱spindle nose JIS A2-8 ︱spindle bore 91 mm︱max. bar capacity 80 mm︱usable bar diameter ( - ) mm︱C-Axis 0,001 °︱Subspindel: ︱Spindle speed range subspindle 6.000 min/-1︱power capacity - Sub spindle 11 / 7,5 kW︱spindle bore 73 mm︱usable bar diameter 43 mm︱C-Axis 0,001 °︱axis stroke:
          CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive - Y-Axis - only ca. 1,200h spindle hours - only ca. 5,220 hours of operation
            turning diameter max. 356 mm
            turning length 705 mm
            control M730 UM MAPPS CELOS
            greates pass round over bed 920 mm
            Swing dia. over traverse guidewa. 742 mm
            turning speed range - main spind. 4.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            spindle nose JIS A2-8
            spindle bore 91 mm
            max. bar capacity 80 mm
            usable bar diameter ( - ) mm
            C-Axis 0,001 °
            Spindle speed range subspindle 6.000 min/-1
            power capacity - Sub spindle 11 / 7,5 kW
            spindle bore 73 mm
            usable bar diameter 43 mm
            C-Axis 0,001 °
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI - NLX 2500 SY / 700

            - Subspindle
            - Tool-Drive
            - Y-Axis

            - only ca. 1,200h spindle hours
            - only ca. 5,220 hours of operation


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OKUMA L300-M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1406 · CNC Turning- and Milling Center

          OKUMA - L300-M - - 2015 - OSP - P300

          Technical details
          swing over bed 520 mm︱swing diameter over slide rest 400 mm︱control OSP - P300 ︱max. turning diameter 300 mm︱Max. Turning length 450 mm︱turning speed range 25 - 3.000 U/min︱driven tools turning speeds 4.500 U/min︱travel -x axis 235 mm︱travel -z axis 520 mm︱number controlled axis 2 ︱no. of workpieces in the magazine 12 Stück︱Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm︱weight of the machine 4.600 kg︱
          CNC Turning- and Milling Center | OKUMA - L300-M The machine is in good condition. Please refer to further technical details in the attachement of the offer. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: L300 M | L 300M | L-300 M | L-300M
            swing over bed 520 mm
            swing diameter over slide rest 400 mm
            control OSP - P300
            max. turning diameter 300 mm
            Max. Turning length 450 mm
            turning speed range 25 - 3.000 U/min
            driven tools turning speeds 4.500 U/min
            travel -x axis 235 mm
            travel -z axis 520 mm
            number controlled axis 2
            no. of workpieces in the magazin. 12 Stück
            Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm
            weight of the machine 4.600 kg
            Description :
            CNC Turning- and Milling Center | OKUMA - L300-M


            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: L300 M | L 300M | L-300 M | L-300M


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center OKUMA L300-M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1407 · CNC Turning- and Milling Center

          OKUMA - L300-M - - 2015 - OSP - P300

          Technical details
          swing over bed 520 mm︱swing diameter over slide rest 400 mm︱control OSP - P300 ︱max. turning diameter 300 mm︱Max. Turning length 450 mm︱turning speed range 25 - 3.000 U/min︱driven tools turning speeds 4.500 U/min︱travel -x axis 235 mm︱travel -z axis 520 mm︱number controlled axis 2 ︱no. of workpieces in the magazine 12 Stück︱Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm︱weight of the machine 4.600 kg︱
          CNC Turning- and Milling Center | OKUMA - L300-M The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: L300 M | L 300M | L-300 M | L-300M
            swing over bed 520 mm
            swing diameter over slide rest 400 mm
            control OSP - P300
            max. turning diameter 300 mm
            Max. Turning length 450 mm
            turning speed range 25 - 3.000 U/min
            driven tools turning speeds 4.500 U/min
            travel -x axis 235 mm
            travel -z axis 520 mm
            number controlled axis 2
            no. of workpieces in the magazin. 12 Stück
            Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm
            weight of the machine 4.600 kg
            Description :
            CNC Turning- and Milling Center | OKUMA - L300-M


            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: L300 M | L 300M | L-300 M | L-300M


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI NLX 2000SY/500


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-202258 · CNC Turning- and Milling Center

          DMG MORI - NLX 2000SY/500 - - 2015 -

          Technical details
          turning diameter 356 mm︱turning length 510 mm︱control ︱spindle tunring speed 5000 U/min︱spindle motor 15 kW︱x-axis 260 mm︱z-axis 580 mm︱y-axis 100 mm︱weight of the machine ca. 5500 t︱
          In our opinion, the machine is in very good condition and can be inspected under power by appointment. Technical features: - Bar feeder interface - Mitsubishi components - Parts catcher - measuring arm ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***
            turning diameter 356 mm
            turning length 510 mm
            spindle tunring speed 5000 U/min
            spindle motor 15 kW
            x-axis 260 mm
            z-axis 580 mm
            y-axis 100 mm
            weight of the machine ca. 5500 t
            Description :
            In our opinion, the machine is in very good condition
            and can be inspected under power by appointment.

            Technical features:
            - Bar feeder interface
            - Mitsubishi components
            - Parts catcher
            - measuring arm

            ***Accessories, tools and clamping devices shown are only part of the scope of
            delivery
            if this is noted in the additional information.***

            ***Changes and errors in the technical data and information as well as
            Subject to prior sale!***


        • Matthias Ehlers Werkzeugmaschinen
        • Nikolaus-Otto-Straße 19 + 21
        • 22946 Trittau
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MORI SEIKI NZX 2000 / 800 SY


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8933 · CNC Turning- and Milling Center

          MORI SEIKI - NZX 2000 / 800 SY - - 2014 - Fanuc 31iA

          Technical details
          turning diameter max. 300 mm︱turning length max. 810 mm︱control Fanuc 31iA ︱standard turning dia. 200 mm︱greates pass round over bed 800 mm︱Swing dia. over traverse guideway 800 mm︱distance between spindles 1.130 mm︱Main spindle: ︱Number of revolutions max. 5.000 min/-1︱power capacity - main spindel 25 / 22 kW︱max. Torque 358 Nm︱spindle diameter in front bearing 120 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱C-Axis 0,001 °︱spindle nose JIS A2-6 ︱Subspindel: ︱Number of revolutions max. 5.000 min/-1︱power capacity - Sub spindle 25 / 22 kW︱max. Torque 358 Nm︱
          CNC - Turning- and MillingCenter MORI SEIKI - NZX 2000 / 800 SY - Main- and Subspindle - 2 turrets - Y-Axis - tool-drive - Robot-Loading-System
            turning diameter max. 300 mm
            turning length max. 810 mm
            control Fanuc 31iA
            standard turning dia. 200 mm
            greates pass round over bed 800 mm
            Swing dia. over traverse guidewa. 800 mm
            distance between spindles 1.130 mm
            Number of revolutions max. 5.000 min/-1
            power capacity - main spindel 25 / 22 kW
            max. Torque 358 Nm
            spindle diameter in front bearin. 120 mm
            spindle bore 73 mm
            max. usable bar diameter 65 mm
            C-Axis 0,001 °
            spindle nose JIS A2-6
            Number of revolutions max. 5.000 min/-1
            power capacity - Sub spindle 25 / 22 kW
            max. Torque 358 Nm
            Description :
            CNC - Turning- and MillingCenter
            MORI SEIKI - NZX 2000 / 800 SY

            - Main- and Subspindle
            - 2 turrets
            - Y-Axis
            - tool-drive
            - Robot-Loading-System



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX beta 1250 TC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19470 · CNC Turning- and Milling Center

          DMG MORI - CTX beta 1250 TC - - 2014 - Siemens 840D

          Technical details
          turning diameter 500 mm︱turning length 1200 mm︱control Siemens 840D ︱greates pass round over bed 700 mm︱Main spindle: ︱turning speed range - main spindle 20 - 5000 min/-1︱power capacity - main spindel 25 /34 kW︱C-Axis 0,0001 °︱spindle diameter 67 mm︱milling spindle ︱milling spindle motor 23 / 13 kW︱milling head speed 18000 U/min︱b-axis +/- 110 °︱axis stroke: ︱x-axis 490 mm︱y-axis +/- 100 mm︱z-axis 1300 mm︱feeds: ︱rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min︱feed power 5,6 / 5,6 / 7,4 kN︱
          CNC - Turning and milling center - 5 axes simultaneous - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0,0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter - chip conveyor - Tool changer 48-fold (HSK A63) - Direct measuring system - IKZ 25bar - Bar feeder TOP XF-S 375 - Tailstock function for counter spindle - Counter spindle Autoblock D210 ca 8250h Work Hours
            turning diameter 500 mm
            turning length 1200 mm
            control Siemens 840D
            greates pass round over bed 700 mm
            turning speed range - main spind. 20 - 5000 min/-1
            power capacity - main spindel 25 /34 kW
            C-Axis 0,0001 °
            spindle diameter 67 mm
            milling spindle motor 23 / 13 kW
            milling head speed 18000 U/min
            b-axis +/- 110 °
            x-axis 490 mm
            y-axis +/- 100 mm
            z-axis 1300 mm
            rapid traverse ( X / Y / Z ) 60 / 22,5 / 30 m/min
            feed power 5,6 / 5,6 / 7,4 kN
            Description :
            CNC - Turning and milling center - 5 axes simultaneous
            - CNC control Siemens 840D Ergo Line with ShopTurn
            - C-axis (0,0001°)
            - Milling head with B-axis
            - Y-axis
            - Coolant device/paper belt filter
            - chip conveyor
            - Tool changer 48-fold (HSK A63)
            - Direct measuring system
            - IKZ 25bar
            - Bar feeder TOP XF-S 375
            - Tailstock function for counter spindle
            - Counter spindle Autoblock D210

            ca 8250h Work Hours


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex i-500V/5


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-V2239 · CNC Turning- and Milling Center

          MAZAK - Integrex i-500V/5 - - 2014 - Mazatrol Matrix 2

          Technical details
          Control Mazatrol Matrix 2 ︱Maximum workpiece diameterxheight 730 x 1000 mm︱Table size 500x500 mm︱Number of pallets 6 x︱Table load 800 kg︱Table speed 35 - 1000 1/min︱Table power 30/22 kW︱Table indexing 0,0001 °︱Turning diameter mm︱Turning length mm︱Spindle bore diameter mm︱Spindle nose ︱Spindle nose sub spindle ︱Turning speed 1/min︱Turning speed sub spindle 1/min︱Milling head speed 35 - 12000 1/min︱Spindle motor 18,5 kW︱Movement X-axis 1100 mm︱Movement Y-axis 800 mm︱Movement Z-axis 900 mm︱
            Control Mazatrol Matrix 2
            Maximum workpiece diameterxheigh. 730 x 1000 mm
            Table size 500x500 mm
            Number of pallets 6 x
            Table load 800 kg
            Table speed 35 - 1000 1/min
            Table power 30/22 kW
            Table indexing 0,0001 °
            Milling head speed 35 - 12000 1/min
            Spindle motor 18,5 kW
            Movement X-axis 1100 mm
            Movement Y-axis 800 mm
            Movement Z-axis 900 mm
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI CTX 310 eco V3


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8929 · CNC Turning- and Milling Center

          DMG MORI - CTX 310 eco V3 - - 2013 - 840 D sl Siemens

          Technical details
          turning diameter max. 260 mm︱turning length 450 mm︱control 840 D sl Siemens︱centre height 190 mm︱standard turning dia. 200 mm︱turning diameter over bed 330 mm︱turning dia. over face-slide 260 mm︱Main spindle: ︱turning speed range - main spindle max. 5.000 min/-1︱power capacity - main spindel 16,5 / 11 kW︱max. Torque 166,5 Nm︱usable bar diameter 51 mm︱chucking diameter 210 mm︱C-Axis 0,04 °︱axis stroke: ︱travel -x axis 160 mm︱travel -z axis 450 mm︱turret: ︱number of toolpositions 12 pos.︱tool taper VDI 30
          CNC - Turning- and Millingcenter DMG MORI - CTX 310 eco V3
            turning diameter max. 260 mm
            turning length 450 mm
            control 840 D sl Siemens
            centre height 190 mm
            standard turning dia. 200 mm
            turning diameter over bed 330 mm
            turning dia. over face-slide 260 mm
            turning speed range - main spind. max. 5.000 min/-1
            power capacity - main spindel 16,5 / 11 kW
            max. Torque 166,5 Nm
            usable bar diameter 51 mm
            chucking diameter 210 mm
            C-Axis 0,04 °
            travel -x axis 160 mm
            travel -z axis 450 mm
            number of toolpositions 12 pos.
            tool taper VDI 30
            Description :
            CNC - Turning- and Millingcenter
            DMG MORI - CTX 310 eco V3




        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center HWACHEON Hi-Tech 700 MC


          • Kemmerich Werkzeugmaschinen
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-19370 · CNC Turning- and Milling Center

          HWACHEON - Hi-Tech 700 MC - - 2013 - Fanuc Oi-TD

          Technical details
          turning diameter 700 mm︱turning length 2000 mm︱control Fanuc Oi-TD ︱turning diameter over bed 900 mm︱travel -x axis 280 mm︱travel -z axis 2070 mm︱turning speed range - spindle 20 ~ 1800 U/min︱bar material dia. 116 mm︱spindle bearing diameter 180 mm︱spindle bore 132 mm︱drive capacity - spindle motor 37 / 30 kW︱turret (x-stations) 12 ︱driven statition 6 pos︱Spindle speed driven tools ~ 2000 min -1︱power capacity - driven tools 7,5 kW︱max. Torque 190 Nm︱rapid traverse 24 m/min︱C-Axis 0,001 °︱tail stock ︱tailstock adjustment 1848 mm︱
          CNC turning and milling centre HWACHEON Hi-Tech 700 MC with CNC control FANUC series Oi-TD - Tool turret 12-fold (driven tools) - Chuck 380mm - Chip conveyor - Coolant device - SMW Auto steady rest dia 350mm ca 17600h Running Hours
            turning diameter 700 mm
            turning length 2000 mm
            control Fanuc Oi-TD
            turning diameter over bed 900 mm
            travel -x axis 280 mm
            travel -z axis 2070 mm
            turning speed range - spindle 20 ~ 1800 U/min
            bar material dia. 116 mm
            spindle bearing diameter 180 mm
            spindle bore 132 mm
            drive capacity - spindle motor 37 / 30 kW
            turret (x-stations) 12
            driven statition 6 pos
            Spindle speed driven tools ~ 2000 min -1
            power capacity - driven tools 7,5 kW
            max. Torque 190 Nm
            rapid traverse 24 m/min
            C-Axis 0,001 °
            tailstock adjustment 1848 mm
            Description :
            CNC turning and milling centre HWACHEON Hi-Tech 700 MC
            with CNC control FANUC series Oi-TD
            - Tool turret 12-fold (driven tools)
            - Chuck 380mm
            - Chip conveyor
            - Coolant device
            - SMW Auto steady rest dia 350mm

            ca 17600h Running Hours


        • Kemmerich Werkzeugmaschinen
        • Im Rottfeld 1a
        • 40789 Monheim am Rhein
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX SpeedLine ABC 65


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8931 · CNC Turning- and Milling Center

          INDEX - SpeedLine ABC 65 - - 2013 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter max. 65 mm︱turning length ca. 200 mm︱control Sinumerik 840D sl Siemens︱Distance Main to Subspindle 250 mm︱Main spindle: ︱Max. rpm 6.000 min/-1︱power capacity - main spindel 35 / 25 kW︱max. Torque 120 Nm︱spindle head AD 140 mm ISO 702/1︱spindle bearing diameter 85 mm︱max. usable bar diameter 65 mm︱max. chucking diameter 160 mm︱C-Axis 0,001 °︱Subspindle: ︱Max. rpm 6.000 min/-1︱power capacity - Sub spindle 9 / 5 kW︱max. Torque 20 Nm︱max. usable bar diameter 52 mm︱max. chucking diameter 110 mm︱C-Axis 0,001 °︱
          CNC-Production-Lathe INDEX - SpeedLine ABC 65 - incl. bar loading magazine TOP AUTOMAZIONI - XFS 365, 3m - Main- and Subspindle (Subspindle on lower turret) - upper and lower turret (each with X,Y,Z + CR-Axis) - Tool-Drive - Rear-Side-Machining: 8 pos. incl. 5 pos with tool-drive - Spindle-Hours: S4: ca. 1.100h / S5: ca. 800h - regulary and orderly serviced - new bearings subspindle in 2020
            turning diameter max. 65 mm
            turning length ca. 200 mm
            control Sinumerik 840D sl Siemens
            Distance Main to Subspindle 250 mm
            Max. rpm 6.000 min/-1
            power capacity - main spindel 35 / 25 kW
            max. Torque 120 Nm
            spindle head AD 140 mm ISO 702/1
            spindle bearing diameter 85 mm
            max. usable bar diameter 65 mm
            max. chucking diameter 160 mm
            C-Axis 0,001 °
            Max. rpm 6.000 min/-1
            power capacity - Sub spindle 9 / 5 kW
            max. Torque 20 Nm
            max. usable bar diameter 52 mm
            max. chucking diameter 110 mm
            C-Axis 0,001 °
            Description :
            CNC-Production-Lathe
            INDEX - SpeedLine ABC 65

            - incl. bar loading magazine TOP AUTOMAZIONI - XFS 365, 3m

            - Main- and Subspindle (Subspindle on lower turret)
            - upper and lower turret (each with X,Y,Z + CR-Axis)
            - Tool-Drive
            - Rear-Side-Machining: 8 pos. incl. 5 pos with tool-drive
            - Spindle-Hours: S4: ca. 1.100h / S5: ca. 800h
            - regulary and orderly serviced
            - new bearings subspindle in 2020



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center DMG MORI SEIKI NTX 1000


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8651 · CNC Turning- and Milling Center

          DMG MORI SEIKI - NTX 1000 - - 2013 - Sinumerik 840D sl Siemens

          Technical details
          turning diameter 370 mm︱turning length max. 450 mm︱control Sinumerik 840D sl Siemens︱swing diameter 370 mm︱Swing dia. over traverse guideway 370 mm︱spindle distance 870 mm︱Main spindle: ︱Max. rpm 6.000 min/-1︱power capacity - main spindel 11 / 7,5 kW︱max. Torque 220 / 150 Nm︱spindle bearing diameter 110 mm︱spindle bore 73 mm︱max. usable bar diameter 51 mm︱spindle nose A2-6 DIN 55026︱C-Axis 360 °︱Subspindel: ︱Max. rpm 6.000 min/-1︱power capacity - Sub spindle 7,5 / 5,5 kW︱max. Torque 30 / 22 Nm︱spindle bearing diameter 70 mm︱
          CNC - Turning- and MillingCenter DMG MORI SEIKI - NTX 1000 - Main- and Subspindle - Turning-Millingspindle 20.000 1/min - Subspindle and Milling-Spindle swivable - turret below - Through-Hollow-Chuck 52mm - Sinumerik ShopTurn 3G
            turning diameter 370 mm
            turning length max. 450 mm
            control Sinumerik 840D sl Siemens
            swing diameter 370 mm
            Swing dia. over traverse guidewa. 370 mm
            spindle distance 870 mm
            Max. rpm 6.000 min/-1
            power capacity - main spindel 11 / 7,5 kW
            max. Torque 220 / 150 Nm
            spindle bearing diameter 110 mm
            spindle bore 73 mm
            max. usable bar diameter 51 mm
            spindle nose A2-6 DIN 55026
            C-Axis 360 °
            Max. rpm 6.000 min/-1
            power capacity - Sub spindle 7,5 / 5,5 kW
            max. Torque 30 / 22 Nm
            spindle bearing diameter 70 mm
            Description :
            CNC - Turning- and MillingCenter
            DMG MORI SEIKI - NTX 1000

            - Main- and Subspindle
            - Turning-Millingspindle 20.000 1/min
            - Subspindle and Milling-Spindle swivable
            - turret below
            - Through-Hollow-Chuck 52mm

            - Sinumerik ShopTurn 3G



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center EMCO EmcoTurn E65


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8825 · CNC Turning- and Milling Center

          EMCO - EmcoTurn E65 - - 2012 - Sinumerik 828 D Siemens

          Technical details
          greates pass round over bed max. 540 mm︱Swing dia. over traverse guideway 360 mm︱control Sinumerik 828 D Siemens︱max. turning diameter 310 mm︱max. workpiece length 520 mm︱max. bar capacity 65 mm︱centre distance 680 mm︱Main spindle: ︱turning speed range - main spindle 60 - 4.200 min/-1︱power capacity - main spindel 18 / 15 kW︱max. Torque 192 Nm︱spindle head DIN 55026 / KK6 ︱spindle diameter in front bearing 100 mm︱spindle bore 73 mm︱max. usable bar diameter 65 mm︱max. chucking diameter 254 mm︱C-Axis 0,001 °︱axis stroke: ︱x-axis 210 mm︱z-axis 610 mm︱
          CNC Turning- and Milling Center EMCO - EmcoTurn E65 - incl. Automation FMB / Yaskawa - Machine has been worked only with Aluminium-Die-Casting
            greates pass round over bed max. 540 mm
            Swing dia. over traverse guidewa. 360 mm
            control Sinumerik 828 D Siemens
            max. turning diameter 310 mm
            max. workpiece length 520 mm
            max. bar capacity 65 mm
            centre distance 680 mm
            turning speed range - main spind. 60 - 4.200 min/-1
            power capacity - main spindel 18 / 15 kW
            max. Torque 192 Nm
            spindle head DIN 55026 / KK6
            spindle diameter in front bearin. 100 mm
            spindle bore 73 mm
            max. usable bar diameter 65 mm
            max. chucking diameter 254 mm
            C-Axis 0,001 °
            x-axis 210 mm
            z-axis 610 mm
            Description :
            CNC Turning- and Milling Center
            EMCO - EmcoTurn E65

            - incl. Automation FMB / Yaskawa
            - Machine has been worked only with Aluminium-Die-Casting



        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center INDEX G400 S-1/300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1044 · CNC Turning- and Milling Center

          INDEX - G400 S-1/300 - - 2011 - INDEX - C200-4D

          Technical details
          work travel X:320 & Z:1250 mm︱rapid traverse X:20 & Z:40 m/min︱control INDEX - C200-4D ︱--- MOTOR MILLING SPINDLE --- ------------------------- ︱tool taper HSK A63 ︱turning speeds 12000 U/min︱Power 27,5 KW︱front bearing 80 mm︱turning speeds 3000 U/min︱MAIN SPINDLE D102 direct drive ------------------------- ︱spindle diameter in front bearing 1200 mm︱spindle passage 102 mm︱forward bearing diameter 170 mm︱
          CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
            work travel X:320 & Z:1250 mm
            rapid traverse X:20 & Z:40 m/min
            control INDEX - C200-4D
            --- MOTOR MILLING SPINDLE --- -------------------------
            tool taper HSK A63
            turning speeds 12000 U/min
            Power 27,5 KW
            front bearing 80 mm
            turning speeds 3000 U/min
            MAIN SPINDLE D102 direct drive -------------------------
            spindle diameter in front bearin. 1200 mm
            spindle passage 102 mm
            forward bearing diameter 170 mm
            Description :
            CNC Turning- and Milling Center | INDEX - G400 S-1/300

            The machine is in a very good condition
            with only 2500 H main working hours.

            + MARPOSS probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G400 | G 400 | G400 S1 300 | G400S1 300


        • STEINHAND GmbH
        • Am Stahlwerk 15
        • 45527 Hattingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center GILDEMEISTER Sprint 42 linear


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8957 · CNC Turning- and Milling Center

          GILDEMEISTER - Sprint 42 linear - - 2011 - Fanuc 160i SLIMline

          Technical details
          turning diameter max. 42 mm︱turning length Z2: 320 mm︱control Fanuc 160i SLIMline︱Main spindle: ︱Max. rpm 6.500 min/-1︱power capacity - main spindel 7,5 / 5,5 kW︱max. Torque 37,5 Nm︱max. usable bar diameter 42 mm︱C - Axis 360 °︱slide I: ︱x-travel 1: 65 mm︱y-travel 1: 350 mm︱z-travel 1: 120 mm︱Tooling 6 / 4 pos.︱fixed tool stations 6 ︱driven statition 4 ︱outer processing 6 ︱inner processing 4 ︱Shank diameter 16 x 16 mm︱Drill shank diameter 32 mm︱
          CNC-High-Performance Turning- and Millingcenter GILDEMEISTER - Sprint 42 linear - Axis: 6+2 - Main- and Subspindle - tool drive - 2 C-Axis
            turning diameter max. 42 mm
            turning length Z2: 320 mm
            control Fanuc 160i SLIMline
            Max. rpm 6.500 min/-1
            power capacity - main spindel 7,5 / 5,5 kW
            max. Torque 37,5 Nm
            max. usable bar diameter 42 mm
            C - Axis 360 °
            x-travel 1: 65 mm
            y-travel 1: 350 mm
            z-travel 1: 120 mm
            Tooling 6 / 4 pos.
            fixed tool stations 6
            driven statition 4
            outer processing 6
            inner processing 4
            Shank diameter 16 x 16 mm
            Drill shank diameter 32 mm
            Description :
            CNC-High-Performance Turning- and Millingcenter
            GILDEMEISTER - Sprint 42 linear

            - Axis: 6+2
            - Main- and Subspindle
            - tool drive
            - 2 C-Axis


        • Stiens Werkzeugmaschinen GmbH
        • Mittelweg 92
        • 59302 Oelde
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center TRAUB TNL 12K


          • Detlef Jahn e. K.
          • Gewerbepark 8
          • 75331 Engelsbrand
          • Deutschland

          • +49 (0)7235 974820
            +49 (0)7235 9748224
          • info@langdreher.de
            www.langdreher.de
          #1092-02833 · CNC Turning- and Milling Center

          TRAUB - TNL 12K - - 2010 - Traub System TX 8i

          Technical details
          turning diameter 12,7 mm︱turning length 50 mm︱control Traub System TX 8i ︱turning speeds 12000 U/min︱c-axis 0,001° ︱gripping station 12,7 mm︱c-axis 0,001 °︱speeds 12000 U/min︱rapid traverse 15 m/min︱turret (x-stations) 6 ︱worktool system 5+3 ︱worktool system 3 Werkzeugsysteme ︱Number of working hours 51847 h︱total power requirement 2,5/4 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,4 x 1,1 x 1,7 m︱driven tools 6+4+4 Rev+S7︱
          CNC turning machine Traub TNL 12K, built 2010, with barloader LNS Tryton 112 Without S8-drive for rear working with driven tools. Fixed tools are ok. S8-drive with motor can be installed later if necessary.
            turning diameter 12,7 mm
            turning length 50 mm
            control Traub System TX 8i
            turning speeds 12000 U/min
            c-axis 0,001°
            gripping station 12,7 mm
            c-axis 0,001 °
            speeds 12000 U/min
            rapid traverse 15 m/min
            turret (x-stations) 6
            worktool system 5+3
            worktool system 3 Werkzeugsysteme
            Number of working hours 51847 h
            total power requirement 2,5/4 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,4 x 1,1 x 1,7 m
            driven tools 6+4+4 Rev+S7
            Description :
            CNC turning machine Traub TNL 12K, built 2010, with barloader LNS Tryton 112
            Without S8-drive for rear working with driven tools. Fixed tools are ok.
            S8-drive with motor can be installed later if necessary.


        • Detlef Jahn e. K.
        • Gewerbepark 8
        • 75331 Engelsbrand
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes CNC Turning- and Milling Center MAZAK Integrex 400-IV


          • MAMACH Machinenhandel BV
          • Campagneweg 10
          • 4761 RM Zevenbergen
          • Niederlande

          • +31 (0)168325354
          • info@mamach.nl
            www.mamach.nl
          #2041-V2240 · CNC Turning- and Milling Center

          MAZAK - Integrex 400-IV - - 2010 - Mazatrol Matrix

          Technical details
          Control Mazatrol Matrix ︱Turning diameter 660/760 mm︱Turning length 1524 mm︱Spindle bore diameter 102 mm︱Spindle nose ︱Spindle nose sub spindle ︱Turning speed 35 - 3300 1/min︱Turning speed sub spindle 1/min︱Milling head speed 12000 1/min︱Movement X-axis 630 mm︱Movement Y-axis 230 mm︱Movement Z-axis 1585 mm︱B-Axis travel -30 / +120 °︱C-Axis indexing 0,0001 °︱Tool Taper Capto C6 ︱Tools in tool magazine 120 ︱Length mm︱Width mm︱Height mm︱Weight 12610 kg︱
            Control Mazatrol Matrix
            Turning diameter 660/760 mm
            Turning length 1524 mm
            Spindle bore diameter 102 mm
            Turning speed 35 - 3300 1/min
            Milling head speed 12000 1/min
            Movement X-axis 630 mm
            Movement Y-axis 230 mm
            Movement Z-axis 1585 mm
            B-Axis travel -30 / +120 °
            C-Axis indexing 0,0001 °
            Tool Taper Capto C6
            Tools in tool magazine 120
            Weight 12610 kg
            Description :



        • MAMACH Machinenhandel BV
        • Campagneweg 10
        • 4761 RM Zevenbergen
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   


          A CNC Turning and Milling Center from LagerMaschinen
          A CNC turning and milling center from LagerMaschinen - good for business

          A CNC turning and milling center from LagerMaschinen will certainly be a great advantage to your small or medium-sized business. Choose from a CNC turning and milling center that fits your needs exactly. A CNC turning and milling center uses either one of multiple axes to calibrate and work wood metal or other hard materials. When purchasing a CNC turning and milling center from LagerMaschinen you'll be able to ensure quality control as well as to speak directly with sellers. Let LagerMaschinen's qualified experts assist you in your search for your next business machine.

          CNC turning and milling center from LagerMaschinen

          A CNC turning and milling center (also known as a lathe) can be used for many different purposes. No matter what your end product a CNC turning and milling center from LagerMaschinen is just what you need. Used machines are more economically viable as well as kinder to the environment. A CNC turning and milling center from LagerMaschinen could be the logical solution for your production concerns. By purchasing your CNC turning and milling center through LagerMaschinen and its team of experts and professionals you'll not only find precisely what you're looking for but will also ensure that it lasts for a lifetime.

          CNC turning and milling center - the most logical choice

          No matter what type of CNC turning and milling center you're looking for LagerMaschinen has what you need. Log on create and account and start shopping at LagerMaschinen today.