'
Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Roller leveller

          Machinelist: Roller leveller


          Roller leveller

          used Sheet metal working / shaeres / bending Roller leveller BAD SALZUNGEN MR 250/4


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-896 · Roller leveller

          BAD SALZUNGEN - MR 250/4 - - unbekannt -

          Technical details
          material width 250 mm︱material thickness 2 - 4 mm︱no. of straightening rolls 7 ︱run-in height 1250 mm mm︱strip intake tiltable, positiv 25 °︱strip intake tiltable, negativ 30 °︱total power requirement 3 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. m︱
          Leveler was dismantled, checked and then repainted
            material width 250 mm
            material thickness 2 - 4 mm
            no. of straightening rolls 7
            run-in height 1250 mm mm
            strip intake tiltable, positiv 25 °
            strip intake tiltable, negativ 30 °
            total power requirement 3 kW
            weight of the machine ca. 800 kg
            Description :
            Leveler was dismantled, checked and then repainted


        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller GROETZINGER R 250/9


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-143047 · Roller leveller

          GROETZINGER - R 250/9 - - unbekannt - konventionell

          Technical details
          material width 250 mm︱material thickness 0,5 - 4,0 mm︱no. of straightening rolls 9 ︱straightening roll diameter 60 mm︱number of draw-in rolls 2 ︱power requirement 3,8 kW︱Weight 0,8 t︱Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m︱
          with infinitely variable drive
            material width 250 mm
            material thickness 0,5 - 4,0 mm
            no. of straightening rolls 9
            straightening roll diameter 60 mm
            number of draw-in rolls 2
            power requirement 3,8 kW
            Weight 0,8 t
            Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m
            Description :
            with infinitely variable drive


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller GRÖTZINGER unbekannt


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15674 · Roller leveller

          GRÖTZINGER - unbekannt - - unbekannt -

          Technical details
          material width 500 mm︱material thickness 0 mm︱no. of straightening rolls 9 ︱weight of the machine ca. 2 t︱dimensions of the machine ca. BxTxH 2000x1500x2500 mm︱
            material width 500 mm
            no. of straightening rolls 9
            weight of the machine ca. 2 t
            dimensions of the machine ca. BxTxH 2000x1500x2500 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller RICHTWERK


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-120046 · Roller leveller

          RICHTWERK - - - ? - ---

          Technical details
          material width 210 mm︱material thickness mm︱no. of straightening rolls 6 ︱straightening roll diameter 40 mm︱weight t︱dimensions (WxDxH) 0,45 x 0,6 x 1,1 m︱
          Straightening device with height adjustment of base frame
            material width 210 mm
            no. of straightening rolls 6
            straightening roll diameter 40 mm
            dimensions (WxDxH) 0,45 x 0,6 x 1,1 m
            Description :
            Straightening device
            with height adjustment of base frame


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller BAD SALZUNGEN MAR 250/2


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073124 · Roller leveller

          BAD SALZUNGEN - MAR 250/2 - - ? - konventionell

          Technical details
          material width 250 mm︱material thickness 0,2 - 2,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 60 mm︱run-in height 1250 mm︱power capacity 4,0 kW︱weight 0,65 t︱Dimensions (WxDxH) 1,05 x 1,25 x 1,5 m︱
          with infinitely variable drive inlet height approx. 1250 mm
            material width 250 mm
            material thickness 0,2 - 2,0 mm
            no. of straightening rolls 7
            straightening roll diameter 60 mm
            run-in height 1250 mm
            power capacity 4,0 kW
            weight 0,65 t
            Dimensions (WxDxH) 1,05 x 1,25 x 1,5 m
            Description :
            with infinitely variable drive
            inlet height approx. 1250 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller FREI


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-053112 · Roller leveller

          FREI - - - ? - konventionell

          Technical details
          material width 300 mm︱material thickness - 3,0 mm︱no. of straightening rolls 7 Stück︱straightening roll diameter 60 mm︱power capacity kW︱weight 0,8 t︱Dimensions (WxDxH) 0,9 x 1,5 x 1,4 m︱
            material width 300 mm
            material thickness - 3,0 mm
            no. of straightening rolls 7 Stück
            straightening roll diameter 60 mm
            weight 0,8 t
            Dimensions (WxDxH) 0,9 x 1,5 x 1,4 m


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller DIMECO 1675 D


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063165 · Roller leveller

          DIMECO - 1675 D - - ? - konventionell

          Technical details
          material width 500 mm︱material thickness 0,6 - 2,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 60 mm︱number of draw-in rolls 2 + 2 ︱inlet roll diameter 60 mm︱max. material thickness 2,0 mm︱material thickness at 150 mm material width 2,0 mm︱material thickness at 500 mm material width 1,6 mm︱power requirement kW︱weight 0,5 t︱dimensions (WxDxH) 0,8 x 1,0 x 1,2 m︱
          material thickness 1,6 mm at material width 500 mm material thickness 2,0 mm at material width 150 mm
            material width 500 mm
            material thickness 0,6 - 2,0 mm
            no. of straightening rolls 7
            straightening roll diameter 60 mm
            number of draw-in rolls 2 + 2
            inlet roll diameter 60 mm
            max. material thickness 2,0 mm
            material thickness at 150 mm mat. 2,0 mm
            material thickness at 500 mm mat. 1,6 mm
            weight 0,5 t
            dimensions (WxDxH) 0,8 x 1,0 x 1,2 m
            Description :
            material thickness 1,6 mm at material width 500 mm
            material thickness 2,0 mm at material width 150 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller RICHTWERK


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-120045 · Roller leveller

          RICHTWERK - - - ? - ---

          Technical details
          material width 310 mm︱material thickness mm︱no. of straightening rolls 5 ︱straightening roll diameter 25 mm︱weight t︱dimensions (WxDxH) 0,4 x 0,6 x 1,15 m︱
          Straightening device with height adjustment of base frame
            material width 310 mm
            no. of straightening rolls 5
            straightening roll diameter 25 mm
            dimensions (WxDxH) 0,4 x 0,6 x 1,15 m
            Description :
            Straightening device
            with height adjustment of base frame


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller DIMECO 1675 BV


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-063189 · Roller leveller

          DIMECO - 1675 BV - - ? - konventionell

          Technical details
          material width 300 mm︱material thickness 0,6 - 2,5 mm︱no. of straightening rolls 7 ︱straightening roll diameter 60 mm︱number of draw-in rolls 2 + 2 ︱diameter of draw-in rolls 60 mm︱max. material thickness 3,5 mm︱material thickness at 30 mm material width 3,0 mm︱material thickness with 300 mm material width 2,5 mm︱power capacity kW︱weight 0,3 t︱Dimensions (WxDxH) 0,9 x 1,0 x 1,1 m︱
          with infinitely variable drive material thickness 2,5 mm at material width 300 mm material thickness 3,0 mm at material width 30 mm can be offered without or with putting into operation in given condition
            material width 300 mm
            material thickness 0,6 - 2,5 mm
            no. of straightening rolls 7
            straightening roll diameter 60 mm
            number of draw-in rolls 2 + 2
            diameter of draw-in rolls 60 mm
            max. material thickness 3,5 mm
            material thickness at 30 mm mate. 3,0 mm
            material thickness with 300 mm m. 2,5 mm
            weight 0,3 t
            Dimensions (WxDxH) 0,9 x 1,0 x 1,1 m
            Description :
            with infinitely variable drive
            material thickness 2,5 mm at material width 300 mm
            material thickness 3,0 mm at material width 30 mm
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller ARKU RM 1825


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60171 · Roller leveller

          ARKU - RM 1825 - - 2024 CHECK -

          Technical details
          material width 0250 mm︱material thickness 3,00 mm︱no. of straightening rolls 19 ︱sheet thickness - min. 0,30 mm︱diam. of the rolls ca. 18 mm︱speed 2-14 m/min︱back-up rolls-needle bearings ja / yes ︱straightening rolls - bronze bearings ja / yes ︱total power requirement 1,70 kW︱weight of the machine ca. 0,60 t︱dimensions of the machine ca. 1,15 x 0,90 x 1,25 m︱
          - max. roller distance vertically 8 mm - Lubrication of the straightening rollers via grease nipples - Infeed roller table with lateral belt guide - Exit table with belt scanning (start/stop) - Straightening machine is currently designed as a strip straightening machine but can also be used as a part leveling machine The straightener was inspected by the specialist team. Test can be make with your material - please contact us.
            material width 0250 mm
            material thickness 3,00 mm
            no. of straightening rolls 19
            sheet thickness - min. 0,30 mm
            diam. of the rolls ca. 18 mm
            speed 2-14 m/min
            back-up rolls-needle bearings ja / yes
            straightening rolls - bronze bea. ja / yes
            total power requirement 1,70 kW
            weight of the machine ca. 0,60 t
            dimensions of the machine ca. 1,15 x 0,90 x 1,25 m
            Description :
            - max. roller distance vertically 8 mm
            - Lubrication of the straightening rollers via grease nipples
            - Infeed roller table with lateral belt guide
            - Exit table with belt scanning (start/stop)
            - Straightening machine is currently designed as a strip straightening machine
            but can also be used as a part leveling machine

            The straightener was inspected by the specialist team.

            Test can be make with your material - please contact us.


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller UNGERER 1800/2,25/23


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60145 · Roller leveller

          UNGERER - 1800/2,25/23 - - 2023 CHECK -

          Technical details
          material width 1650 mm︱material thickness 2,00 mm︱no. of straightening rolls 23 ︱sheet thickness - min. 0,50 mm︱diam. of the rolls ca. 53,60 mm︱straight. rolls-needle bearings ja / yes ︱between stands ca. 1750 mm︱barrel length ca. 1820 mm︱straight. speed ca. m/ min︱total power requirement 58 kW︱weight of the machine ca. 19,60 t︱dimensions of the machine ca. 6,00 x 3,00 x 2,90 m︱
          Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and cardan shafts Control is missing All motors: main drive motor, pan motor, height adjustment motor and oil pump are provisionally provided with a connection cable. A 24 V transformer is used for the swivel motor and for the height adjustment motor still needed - this is for the brake. 1 box of spare rollers 1 new drive motor 55 kW
            material width 1650 mm
            material thickness 2,00 mm
            no. of straightening rolls 23
            sheet thickness - min. 0,50 mm
            diam. of the rolls ca. 53,60 mm
            straight. rolls-needle bearings ja / yes
            between stands ca. 1750 mm
            barrel length ca. 1820 mm
            total power requirement 58 kW
            weight of the machine ca. 19,60 t
            dimensions of the machine ca. 6,00 x 3,00 x 2,90 m
            Description :
            Number - supports 14 (7 x above/7 x below) with support rollers
            Number - support rollers 174 ( 84 x above / 91 x below)
            Support roller dia. approx. 112mm
            Drive power - main drive 55 kW
            Motorized height adjustment
            Electromotive tipping device
            Crowning (support adjustment (below) mechanical/manual) and individually
            deliverable
            1 set of straightening rollers (replacement rollers) diam. 53.68mm
            Central grease lubrication of the straightening rollers bearing rails
            Circulating oil lubrication of gears and cardan shafts
            Control is missing
            All motors: main drive motor, pan motor, height adjustment motor
            and oil pump are provisionally provided with a connection cable.
            A 24 V transformer is used for the swivel motor and for the height adjustment
            motor
            still needed - this is for the brake.
            1 box of spare rollers
            1 new drive motor 55 kW


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller EBU URM 9.80-320


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15677 · Roller leveller

          EBU - URM 9.80-320 - - 2009 -

          Technical details
          material width 320 mm︱material thickness 8 mm︱no. of straightening rolls 9 ︱material cross-cut 2000 mm²︱weight of the machine ca. 4,2 t︱dimensions of the machine ca. 2000x2000x2400 mm︱
            material width 320 mm
            material thickness 8 mm
            no. of straightening rolls 9
            material cross-cut 2000 mm²
            weight of the machine ca. 4,2 t
            dimensions of the machine ca. 2000x2000x2400 mm


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller DREHER 1675 A-FQ


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-233043 · Roller leveller

          DREHER - 1675 A-FQ - - 1997 - konventionell

          Technical details
          material width 200 mm︱material thickness 0,6 - 5,0 mm︱no. of straightening rolls 7 ︱straightening roll diameter 60 mm︱number of draw-in rolls 2+2 ︱material cross-cut 2,8x200 / 5,0x20 mm²︱speed 3-30 m/min︱power requirement 3,0 kW︱Weight 0,40 t︱dimensions of the machine (WxDxH) 1,1 x 1,4 x 1,6 m︱
          with infinitely variable drive, adjustment of roller cassette manually, coil loop control via infrared
            material width 200 mm
            material thickness 0,6 - 5,0 mm
            no. of straightening rolls 7
            straightening roll diameter 60 mm
            number of draw-in rolls 2+2
            material cross-cut 2,8x200 / 5,0x20 mm²
            speed 3-30 m/min
            power requirement 3,0 kW
            Weight 0,40 t
            dimensions of the machine (WxDxH. 1,1 x 1,4 x 1,6 m
            Description :
            with infinitely variable drive, adjustment of roller cassette manually, coil loop control via infrared


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller SCHLEICHER RMS 8-40 / 160-850


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-043158 · Roller leveller

          SCHLEICHER - RMS 8-40 / 160-850 - - 1996 - keine / Option neu

          Technical details
          material width 850 mm︱material thickness 0,3 - 1,5 mm︱no. of straightening rolls 8 ︱straightening roll diameter 40 mm︱number of draw-in rolls 2 ︱diameter of draw-in rolls 160 mm︱material thickness with 600 mm material width 1,9 mm︱material thickness with 400 mm material width 2,3 mm︱speed 5 - 25 m/min︱min. material width 200 mm︱power capacity kW︱weight 3,1 t︱Dimensions (WxDxH) 2,2 x 1,5 x 2,8 m︱
          with threading aid min. material width 200 mm
            material width 850 mm
            material thickness 0,3 - 1,5 mm
            no. of straightening rolls 8
            straightening roll diameter 40 mm
            number of draw-in rolls 2
            diameter of draw-in rolls 160 mm
            material thickness with 600 mm m. 1,9 mm
            material thickness with 400 mm m. 2,3 mm
            speed 5 - 25 m/min
            min. material width 200 mm
            weight 3,1 t
            Dimensions (WxDxH) 2,2 x 1,5 x 2,8 m
            Description :
            with threading aid
            min. material width 200 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller GSW RMZ 50/54


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-183065V · Roller leveller

          GSW - RMZ 50/54 - - 1996 - konventionell

          Technical details
          material width 500 mm︱coil weight 2 x 1,5 t︱material thickness 0,3 - 1,2 mm︱material cross-cut 600 mm²︱no. of straightening rolls 5 ︱straightening roll diameter 40 mm︱number of draw-in rolls 2 ︱power requirement kW︱weight of straightening machine 2,0 t︱dimensions straightener (WxDxH) 1,5 x 1,5 x 1,9 mm︱
          with neumatic adjustment of the infeed rollers, manual adjustment of the straightening rollers
            material width 500 mm
            coil weight 2 x 1,5 t
            material thickness 0,3 - 1,2 mm
            material cross-cut 600 mm²
            no. of straightening rolls 5
            straightening roll diameter 40 mm
            number of draw-in rolls 2
            weight of straightening machine 2,0 t
            dimensions straightener (WxDxH) 1,5 x 1,5 x 1,9 mm
            Description :
            with neumatic adjustment of the infeed rollers, manual adjustment of the straightening rollers


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller KOHLER 6 HI 30.1000 / 21 T


          • SCHMITT REINHOLD GMBH
          • Obernahmerstr. 74
          • 58119 Hagen-Hohenlimburg
          • Deutschland

          • +49 (0)2334 4847
            +49 (0)2334 4840
          • info@reinhold-schmitt.de
            www.reinhold-schmitt.de
          #2008-06047 · Roller leveller

          KOHLER 6 HI - 30.1000 / 21 T - - 1995/2023 CHECK -

          Technical details
          Material Width 1.000 mm︱Material Thickness 0,50 - 3,00 mm︱No. Levelling Rolls 21 ︱leveling roll diameter app. 30 mm︱distance between stands 1.050 mm︱total power requirement 13 kW︱speed app. 14 m/min︱Machine Weight app. 7,0 t︱Required Space app. 2,70x2,40x2,20 m︱
          6HI LEVELER - drive motor 7,50 kW - working direction: right - left - leveling roll needle bearings - intermediate rolls - rolling mill adjustment vertically 12 mm - rolling mill adjustment motor driven - measuring device digital - measuring display metric - conveyor belt at infeed and run out side - quick change device hydraulically - cicrculating oil lubrication of leveling roll bearing rails and drive shafts - SIEMENS S5 PLC control - LENZE frequency converter - drive motor = brake motor The leveler is under power and can be tested with clean material.
            Material Width 1.000 mm
            Material Thickness 0,50 - 3,00 mm
            No. Levelling Rolls 21
            leveling roll diameter app. 30 mm
            distance between stands 1.050 mm
            total power requirement 13 kW
            speed app. 14 m/min
            Machine Weight app. 7,0 t
            Required Space app. 2,70x2,40x2,20 m
            Description :
            6HI LEVELER

            - drive motor 7,50 kW
            - working direction: right - left
            - leveling roll needle bearings
            - intermediate rolls
            - rolling mill adjustment vertically 12 mm
            - rolling mill adjustment motor driven
            - measuring device digital
            - measuring display metric
            - conveyor belt at infeed and run out side
            - quick change device hydraulically
            - cicrculating oil lubrication of leveling roll bearing rails and drive shafts
            - SIEMENS S5 PLC control
            - LENZE frequency converter
            - drive motor = brake motor
            The leveler is under power and can be tested with clean material.



        • SCHMITT REINHOLD GMBH
        • Obernahmerstr. 74
        • 58119 Hagen-Hohenlimburg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller SCHLEICHER RMS 8-40 / 160-850


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-043157 · Roller leveller

          SCHLEICHER - RMS 8-40 / 160-850 - - 1995 - Siemens S 5

          Technical details
          material width 850 mm︱material thickness 0,3 - 1,5 mm︱no. of straightening rolls 8 ︱straightening roll diameter 40 mm︱number of draw-in rolls 2 ︱diameter of draw-in rolls 160 mm︱material thickness with 600 mm material width 1,9 mm︱material thickness with 400 mm material width 2,3 mm︱speed 5 - 25 m/min︱min. material width 200 mm︱power capacity kW︱weight 2,8 t︱Dimensions (WxDxH) 1,6 x 2,2 x 2,3 m︱
          with threading aid min. material width 200 mm
            material width 850 mm
            material thickness 0,3 - 1,5 mm
            no. of straightening rolls 8
            straightening roll diameter 40 mm
            number of draw-in rolls 2
            diameter of draw-in rolls 160 mm
            material thickness with 600 mm m. 1,9 mm
            material thickness with 400 mm m. 2,3 mm
            speed 5 - 25 m/min
            min. material width 200 mm
            weight 2,8 t
            Dimensions (WxDxH) 1,6 x 2,2 x 2,3 m
            Description :
            with threading aid
            min. material width 200 mm


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller DREHER 1675-A


          • Ambold Pressen GmbH
          • Sommeritzer Straße 43
          • 04626 Schmölln
          • Deutschland

          • +49 (0)3449183314
            +49 (0)3449123492
          • info@ambold-pressen.de
            www.ambold-pressen.de
          #1010-874 · Roller leveller

          DREHER - 1675-A - - 1995 -

          Technical details
          material width 200 mm︱material thickness 0,6 - 3,0 mm︱no. of straightening rolls 7 ︱number of draw-in rolls 2 ︱straightening roll diameter 60 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            material width 200 mm
            material thickness 0,6 - 3,0 mm
            no. of straightening rolls 7
            number of draw-in rolls 2
            straightening roll diameter 60 mm
            Description :



        • Ambold Pressen GmbH
        • Sommeritzer Straße 43
        • 04626 Schmölln
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller SCHLEICHER RML 6-53/96-450


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093010 · Roller leveller

          SCHLEICHER - RML 6-53/96-450 - - 1991 - konventionell

          Technical details
          material width 450 mm︱material thickness 0,5 - 1,0 mm︱no. of straightening rolls 6 ︱straightening roll diameter 53 mm︱number of draw-in rolls 2 ︱diameter of draw-in rolls 96 mm︱power requirement 1,0 kW︱weight 0,65 t︱dimensions (WxDxH) 1,0 x 1,0 x 1,55 m︱
          with infinitely variable drive can be offered without or with putting into operation in given condition
            material width 450 mm
            material thickness 0,5 - 1,0 mm
            no. of straightening rolls 6
            straightening roll diameter 53 mm
            number of draw-in rolls 2
            diameter of draw-in rolls 96 mm
            power requirement 1,0 kW
            weight 0,65 t
            dimensions (WxDxH) 1,0 x 1,0 x 1,55 m
            Description :
            with infinitely variable drive
            can be offered without or with putting into operation in given condition


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller HÄMMERLE - GF BRUGG TRM 50/750


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60132 · Roller leveller

          HÄMMERLE - GF BRUGG - TRM 50/750 - - 1990/2022 -

          Technical details
          material width 0750 mm︱material thickness 12,00 mm︱no. of straightening rolls 19 ︱sheet thickness - min. 0,50 mm︱diam. of the rolls ca. 50 mm︱run-in height 900 mm︱total power requirement kW︱weight of the machine ca. 10,00 t︱dimensions of the machine ca. m︱
          HÄMMERLE HYDRAULIC LEVELING MACHINE - GF BRUGG
            material width 0750 mm
            material thickness 12,00 mm
            no. of straightening rolls 19
            sheet thickness - min. 0,50 mm
            diam. of the rolls ca. 50 mm
            run-in height 900 mm
            weight of the machine ca. 10,00 t
            Description :
            HÄMMERLE HYDRAULIC LEVELING MACHINE - GF BRUGG


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller DUNKES HR 63/TR 25/HRW 25


          • HANS - JÜRGEN GEIGER
          • James-Watt-Str. 12
          • 72555 Metzingen
          • Deutschland

          • (0049)-7123-18040
            (0049)-7123-18384
          • geiger@geiger-germany.com
            www.geiger-germany.com
          #1049-734635 · Roller leveller

          DUNKES - HR 63/TR 25/HRW 25 - - 1990 -

          Technical details
          material width 3000 mm︱material thickness 0 mm︱no. of straightening rolls 0 ︱total power requirement 22 kW︱weight of the machine ca. 14,5 t︱dimensions of the machine ca. 7,5 x 2,5 x 2,9 m︱
          D U N K E S Hydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25 Year 1990 ( H 89-1960 ) ____________________________________________________________ Consisting of: Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm, Distance to column 620 mm, sensitive Straightening stroke via handlever with turret-stop, Measuring device for accurate straitening via a lightbar Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd 57/10 mm/s, designed as Pressbow which moves in both directions against a straightening tool to avoid the turnovers of workpiece during straightening process, 4 tool posts front and backside/left and right with a distance of 600 mm, Handlever for stroke movement. Torsion straightening device for twisting the section material up to a power of 25.000 Nm, Resistance Moment 69.000 mm³, twisting force max. 320 N/mm², workpiece glamping 320 kN, mounted on left hand side of Press as a integrated unit. The left handed slide can be moved approx.. 3000 mm and is equipped as the clamping station for the workpieces and the right handed unit is for clamping and twisting hydraulically this workpiece up to 35 ° Display to see the torsion on a lightbar.For the crossmovement/loading of workpiece is a roller chain available Straightening Bed for placing and for moving the workpiece towards to the straightening devices, consisting of conveyor roller tables left and right on the press with each approx. 3000 mm length,rollers can be lifted pneumatically for easier transportation. Between the two beds is a working gap for the vertical straightening cylinder with two adjustable counter steadies with exchangeables jaws. Mechanical measuring device to check tension of workpiece built on presstable. The 3 Straightening positions are electrically separated, so only one position can be used on a time. Various pressing tools in different shapes and lengths available. Also a roller support for straighten cylindrical shafts or tubes up to 1.800 mm length to place it on the a.m. straightening bed. Oil tank capacity for hydraulic oil approx. 500 liters Total electrical load approx. 22 kW - 400 V - 50 cycles Weight approx. 14,5 to, Outside dimension: 7,5 x 2,5 x 2,9 m height Condition : good to very good – can be soon inspected under power. Delivery : ex stock – as inspected here in stock Payment : net – after completion of contract
            material width 3000 mm
            total power requirement 22 kW
            weight of the machine ca. 14,5 t
            dimensions of the machine ca. 7,5 x 2,5 x 2,9 m
            Description :
            D U N K E S
            Hydraulic Straightening System for Flat material and Section Material
            With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25
            Year 1990 ( H 89-1960 )
            ____________________________________________________________

            Consisting of:
            Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of
            Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm,
            Distance to column 620 mm, sensitive Straightening stroke via handlever with
            turret-stop, Measuring device for accurate straitening via a lightbar
            Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on
            right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd
            57/10 mm/s, designed as Pressbow which moves in both directions against a
            straightening tool to avoid the turnovers of workpiece during straightening
            process, 4 tool posts front and backside/left and right with a distance of
            600 mm, Handlever for stroke movement.
            Torsion straightening device for twisting the section material up to a power
            of 25.000 Nm,
            Resistance Moment 69.000 mm³, twisting force max. 320 N/mm², workpiece
            glamping 320 kN,
            mounted on left hand side of Press as a integrated unit. The left handed
            slide can be moved approx.. 3000 mm and is equipped as the clamping station
            for the workpieces and the right handed unit is for clamping and twisting
            hydraulically this workpiece up to 35 ° Display to see the torsion on a
            lightbar.For the crossmovement/loading of workpiece is a roller chain
            available
            Straightening Bed for placing and for moving the workpiece towards to the
            straightening devices,
            consisting of conveyor roller tables left and right on the press with each
            approx. 3000 mm length,rollers can be lifted pneumatically for easier
            transportation. Between the two beds is a working gap for the vertical
            straightening cylinder with two adjustable counter steadies with
            exchangeables jaws. Mechanical measuring device to check tension of
            workpiece built on presstable.
            The 3 Straightening positions are electrically separated, so only one
            position can be used on a time. Various pressing tools in different shapes
            and lengths available. Also a roller support for straighten cylindrical
            shafts or tubes up to 1.800 mm length to place it on the a.m. straightening
            bed.

            Oil tank capacity for hydraulic oil approx. 500 liters

            Total electrical load approx. 22 kW - 400 V - 50 cycles
            Weight approx. 14,5 to,
            Outside dimension: 7,5 x 2,5 x 2,9 m height

            Condition : good to very good – can be soon inspected under power.
            Delivery : ex stock – as inspected here in stock
            Payment : net – after completion of contract



        • HANS - JÜRGEN GEIGER
        • James-Watt-Str. 12
        • 72555 Metzingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller FECKER


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-013235 · Roller leveller

          FECKER - - - 1990 - konventionell

          Technical details
          material width 150 mm︱material thickness 1,5 mm︱no. of straightening rolls 7 ︱straightening roll diameter 50 mm︱number of draw-in rolls 4 ︱power requirement 3,0 kW︱Weight 0,7 t︱dimensions (BxTxH) 1,3 x 1,1 x 1,6 m︱
            material width 150 mm
            material thickness 1,5 mm
            no. of straightening rolls 7
            straightening roll diameter 50 mm
            number of draw-in rolls 4
            power requirement 3,0 kW
            Weight 0,7 t
            dimensions (BxTxH) 1,3 x 1,1 x 1,6 m


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller SOPREM BRM19/150/16/U


          • Maschinen Schwartpaul GmbH
          • Am Wasserwerk 1
          • 58840 Plettenberg
          • Deutschland

          • +49 (0)2391-95960
            +49 (0)2391-959620
          • info@maschinen-schwartpaul.de
            www.maschinen-schwartpaul.de
          #2020-15599 · Roller leveller

          SOPREM - BRM19/150/16/U - - 1989 -

          Technical details
          material width 150 mm︱material thickness 3 mm︱no. of straightening rolls 7
            material width 150 mm
            material thickness 3 mm
            no. of straightening rolls 7


        • Maschinen Schwartpaul GmbH
        • Am Wasserwerk 1
        • 58840 Plettenberg
        • Deutschland

        • Datasheet
          Request / Contact
          used Sheet metal working / shaeres / bending Roller leveller WMW  GOTHA UBR 10x2000/1-16xWDK


          • Frech GmbH
          • Werderstr. 82
          • 74889 Sinsheim
          • Deutschland

          • 0049-7261-1011
            0049-7261-63966
          • info@frech-maschinen.de
            www.frech-maschinen.de
          #1073-60140 · Roller leveller

          WMW GOTHA - UBR 10x2000/1-16xWDK - - 1987 -

          Technical details
          material width 2000 mm︱material thickness 10,00 mm︱no. of straightening rolls 13 ︱sheet thickness - min. 3,00 mm︱diam. of the rolls ca. 145 mm︱straightening feed 16 m/min︱barrel length ca. 2330 mm︱middle distance of straightening rolls 150 mm︱back-up rolls ca. 290 mm︱No. of supports up / down 3/3 ︱main drive motor 30 kW︱total power requirement kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. m︱
            material width 2000 mm
            material thickness 10,00 mm
            no. of straightening rolls 13
            sheet thickness - min. 3,00 mm
            diam. of the rolls ca. 145 mm
            straightening feed 16 m/min
            barrel length ca. 2330 mm
            middle distance of straightening. 150 mm
            back-up rolls ca. 290 mm
            No. of supports up / down 3/3
            main drive motor 30 kW
            weight of the machine ca. 32 t


        • Frech GmbH
        • Werderstr. 82
        • 74889 Sinsheim
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •