Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Oskar Frech GmbH & Co. KG - Stockist for used machines

          Machinelist:


          Motor

          used  Motor Küenle KDGN2C 315 S 4 KT NV ZT IE3


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-935029 · Motor

          Küenle - KDGN2C 315 S 4 KT NV ZT IE3 - - -

          Technical details
          power capacity kW︱volt V︱ampere A︱total power requirement kW︱weight of the machine ca. t︱required space m︱
          Datasheet
          Request / Contact

          Accessories for Diecasting Machines

          used  Accessories for Diecasting Machines FRECH Tiegelabdeckung


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-30 · Accessories for Diecasting Machines

          FRECH - Tiegelabdeckung - - unbekannt - ohne

          Technical details

          isolated crucible cover for multi chamber Meltec furnace ZC80/180
            Description :
            isolated crucible cover for multi chamber Meltec furnace ZC80/180
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH Z20/120C


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983995 · Accessories for Diecasting Machines

          FRECH - Z20/120C - - 2018 -

          Technical details
          pan capacity 420 kg︱
          Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible. Crucible content 420kg/Zn. Melting capacity 120kg/Zn/h Electrical Connection 21,5kW With control cabinet.
            pan capacity 420 kg
            Description :
            Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible.

            Crucible content 420kg/Zn.
            Melting capacity 120kg/Zn/h
            Electrical Connection 21,5kW

            With control cabinet.
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH Tiegelabdeckung


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-19 · Accessories for Diecasting Machines

          FRECH - Tiegelabdeckung - - 2018 - ohne

          Technical details

          Crucible cover for multi chamber Meltec furnace ZC200/250
            Description :
            Crucible cover for multi chamber Meltec furnace ZC200/250
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines ROBAMAT 3212


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-638379 · Accessories for Diecasting Machines

          ROBAMAT - 3212 - - 2017 -

          Technical details
          heating capacity 2 x 20 kW︱Cooling capacity 2 x 40 kW︱
            heating capacity 2 x 20 kW
            Cooling capacity 2 x 40 kW
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH ZC200/250


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-33 · Accessories for Diecasting Machines

          FRECH - ZC200/250 - - 2014 -

          Technical details
          connected load 36 kW︱
          Used machine furnace type Meltec ZC 200/250 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing zinc alloys. Melting capacity per hour 250kg / h 36 kW connected load.
            connected load 36 kW
            Description :
            Used machine furnace type Meltec ZC 200/250 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing zinc alloys.

            Melting capacity per hour 250kg / h 36 kW connected load.

          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines ROBAMAT 3201


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-984405 · Accessories for Diecasting Machines

          ROBAMAT - 3201 - - 2010 -

          Technical details
          heating capacity 1 x 10 kW︱Cooling capacity 1 x 20 kW︱
          Used heating and cooling unit from Robamat for die casting machines. This single-circuit device is designed for the temperature control of die casting tools with oil. Checked, maintained and repaired by the service partner from manufactorer. Available ex stock. Circuits: 1 Flow temperature max. 250°C Heating capacity 1x 10kW Cooling capacity 1x 20kW Voltage 3x 400V / 50Hz
            heating capacity 1 x 10 kW
            Cooling capacity 1 x 20 kW
            Description :
            Used heating and cooling unit from Robamat for die casting machines.
            This single-circuit device is designed for the temperature control of die casting tools with oil.
            Checked, maintained and repaired by the service partner from manufactorer.
            Available ex stock.

            Circuits: 1
            Flow temperature max. 250°C
            Heating capacity 1x 10kW
            Cooling capacity 1x 20kW
            Voltage 3x 400V / 50Hz
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH Spraymotion 411 E


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-17 · Accessories for Diecasting Machines

          FRECH - Spraymotion 411 E - - 2007 - ohne

          Technical details

          used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Included support unit and spray- and blowrail (system SR) Connection 24 pin plug electric driving unit with 400mm stroke length
            Description :
            used electric sprayer Spraymotion 411 E for die casting machines.
            The device has been tested by the manufacturer for function

            Included support unit and spray- and blowrail (system SR)
            Connection 24 pin plug
            electric driving unit with 400mm stroke length
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH MB125/120


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-32 · Accessories for Diecasting Machines

          FRECH - MB125/120 - - 2007 -

          Technical details
          connected load 54 kW︱
          Used machine furnace type Meltec MB 125/120 for use on hot chamber die casting machines type Oskar Frech with 125 tons locking force for processing magnesium alloys. Melting capacity per hour 120kg / h 54 kW connected load. A suitable control cabinet can be built if required.
            connected load 54 kW
            Description :
            Used machine furnace type Meltec MB 125/120 for use on hot chamber die casting machines type Oskar Frech with 125 tons locking force for processing magnesium alloys.

            Melting capacity per hour 120kg / h 54 kW connected load.

            A suitable control cabinet can be built if required.
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines Robamat 5201


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983310 · Accessories for Diecasting Machines

          Robamat - 5201 - - 2004 -

          Technical details
          heating capacity 20 kW︱
          Used heating unit from Robamat for die casting machines. This single-circuit device is designes for the temperature control of die casting tools with oil. The device has been testet for function by the service partner of the manufacturer. Circuits: 1 Flow temperature max. 250°C Heating capacity 1x 20kW Voltage 3x 400V / 50Hz Pump typ / capacity PM3 80L/min
            heating capacity 20 kW
            Description :
            Used heating unit from Robamat for die casting machines.
            This single-circuit device is designes for the temperature control of die casting tools with oil.
            The device has been testet for function by the service partner of the manufacturer.

            Circuits: 1
            Flow temperature max. 250°C
            Heating capacity 1x 20kW
            Voltage 3x 400V / 50Hz
            Pump typ / capacity PM3 80L/min
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines Meltec Z 50/180 B


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-37 · Accessories for Diecasting Machines

          Meltec - Z 50/180 B - - 2001 - ohne

          Technical details

          Used Meltec furnace Typ Z50/180 B (gas heated) incl. used steel crucible and substructure and control cabinet heating capacity 40kW suitable for DAW 40 and DAW 50
            Description :
            Used Meltec furnace Typ Z50/180 B (gas heated) incl. used steel crucible and substructure and control cabinet
            heating capacity 40kW

            suitable for DAW 40 and DAW 50
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH M200/120


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-34 · Accessories for Diecasting Machines

          FRECH - M200/120 - - 2001 -

          Technical details
          connected load 54 kW︱
          Used machine furnace type Meltec M 200/120 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing magnesium alloys. Melting capacity per hour 120kg / h 54 kW connected load. A suitable control cabinet can be built if required.
            connected load 54 kW
            Description :
            Used machine furnace type Meltec M 200/120 for use on hot chamber die casting machines type Oskar Frech with 200 tons locking force for processing magnesium alloys.

            Melting capacity per hour 120kg / h 54 kW connected load.

            A suitable control cabinet can be built if required.
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines Meltec ZC125/250


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-20 · Accessories for Diecasting Machines

          Meltec - ZC125/250 - - 2001 - ohne

          Technical details

          Used Meltec furnace Typ ZC125/250 incl. used stainless steel crucible, control cabinet and substructure heating capacity 32,5kW, 3x400V 50Hz suitable for DAW 125S and DAW 125F
            Description :
            Used Meltec furnace Typ ZC125/250 incl. used stainless steel crucible, control cabinet and substructure
            heating capacity 32,5kW, 3x400V 50Hz

            suitable for DAW 125S and DAW 125F
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines Regloplas P140


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-26 · Accessories for Diecasting Machines

          Regloplas - P140 - - 1999 -

          Technical details

          Used heating and cooling unit from Regloplas for die casting machines. This single-circuit device is designes for the temperature control of die casting tools with water. Circuits: 1 Flow temperature max. 140°C Voltage 3x 400V / 50Hz
            Description :
            Used heating and cooling unit from Regloplas for die casting machines.
            This single-circuit device is designes for the temperature control of die casting tools with water.


            Circuits: 1
            Flow temperature max. 140°C
            Voltage 3x 400V / 50Hz
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines FRECH Weightcontrol 2000


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-984482 · Accessories for Diecasting Machines

          FRECH - Weightcontrol 2000 - - 1996 -

          Technical details

          used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer
            Description :
            used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams.
            The device has been checked and repaired by the manufacturer
          Datasheet
          Request / Contact
          used  Accessories for Diecasting Machines Rauch MO 50 E


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-21 · Accessories for Diecasting Machines

          Rauch - MO 50 E - - 1994 - ohne

          Technical details

          Used Rauch furnace Typ MO50E incl. used cast iron crucible and substructure. Without control cabinet heating capacity 17,5kW, 3x400V 50Hz suitable for DAW 40 and DAW 50
            Description :
            Used Rauch furnace Typ MO50E incl. used cast iron crucible and substructure.
            Without control cabinet
            heating capacity 17,5kW, 3x400V 50Hz

            suitable for DAW 40 and DAW 50
          Datasheet
          Request / Contact

          Cold Chamber Diecasting M/C - Horizontal

          used  Cold Chamber Diecasting M/C - Horizontal FRECH DAK720


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-441201 · Cold Chamber Diecasting M/C - Horizontal

          FRECH - DAK720 - - 2007 - Datadialog

          Technical details
          closing pressure 8000 kN︱clamping plate 1300x1300 mm︱distance between columns 825x825 mm︱lock stroke 825 mm︱column diameter 165 mm︱height of form 350-1000 mm︱capacity of ejector 364 kN︱ejector stroke 180 mm︱casting plunger stroke 550 mm︱casting volume (DIN 24480) 1036-3484 cm³︱injection plunger diameter 60-110 mm︱casting capacity 623 kN︱weight of the machine ca. 35 t︱
          Used Die Casting machine DAK 720-62 with Datadialog control for the use of aluminium and magnesium alloys. Available directly from pre-customer. The machine is equipped with: - Electric Westomat 650 SL ProDos DPC System - 3-axis extracting unit Gripmat 2 ML - Heating and cooling unit Robamat oil 5212.17.40 PM3 - Air ventilation cover Keller Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 8000 kN
            clamping plate 1300x1300 mm
            distance between columns 825x825 mm
            lock stroke 825 mm
            column diameter 165 mm
            height of form 350-1000 mm
            capacity of ejector 364 kN
            ejector stroke 180 mm
            casting plunger stroke 550 mm
            casting volume (DIN 24480) 1036-3484 cm³
            injection plunger diameter 60-110 mm
            casting capacity 623 kN
            weight of the machine ca. 35 t
            Description :
            Used Die Casting machine DAK 720-62 with Datadialog control for the use of aluminium and magnesium alloys.
            Available directly from pre-customer.
            The machine is equipped with:
            - Electric Westomat 650 SL ProDos DPC System
            - 3-axis extracting unit Gripmat 2 ML
            - Heating and cooling unit Robamat oil 5212.17.40 PM3
            - Air ventilation cover Keller

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact

          Hot-Chamber Diecasting Machine - Vertic.

          used  Hot-Chamber Diecasting Machine - Vertic. FRECH W50Zn


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-W2808 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - W50Zn - - 2020 - Datadialog

          Technical details
          closing pressure 600 kN︱clamping plate 460x460 mm︱distance between columns 300x300 mm︱weight of the machine ca. 3,8 t︱lock stroke 230 mm︱capacity of ejector 40 kN︱ejector stroke 70 mm︱height of form 120-350 mm︱column diameter 56 mm︱casting capacity 54 kN︱casting plunger stroke 130 m/m︱injection plunger diameter 45,50,55 mm︱casting volume (DIN 24480) 109,150,194 cm 2︱volume cast pressure 339,284,226 da/cm²︱casting area 176,218,264 cm 2︱Traverse Stroke 220 m/m︱
            closing pressure 600 kN
            clamping plate 460x460 mm
            distance between columns 300x300 mm
            weight of the machine ca. 3,8 t
            lock stroke 230 mm
            capacity of ejector 40 kN
            ejector stroke 70 mm
            height of form 120-350 mm
            column diameter 56 mm
            casting capacity 54 kN
            casting plunger stroke 130 m/m
            injection plunger diameter 45,50,55 mm
            casting volume (DIN 24480) 109,150,194 cm 2
            volume cast pressure 339,284,226 da/cm²
            casting area 176,218,264 cm 2
            Traverse Stroke 220 m/m
          Datasheet
          Request / Contact
          used  Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 200 F


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983996 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 200 F - - 2004 - Datadialog

          Technical details
          closing pressure 2200 kN︱clamping plate 755x755 mm︱distance between columns 500x500 mm︱weight of the machine ca. 8 t︱lock stroke 430 mm︱capacity of ejector 110 kN︱ejector stroke 100 mm︱height of form 250-600 mm︱column diameter 85 mm︱casting capacity 130 kN︱casting plunger stroke 175 m/m︱injection plunger diameter 70,80,90 mm︱casting volume (DIN 24480) 450,636,856 cm ³︱volume cast pressure 335,260,203 kp/cm²︱casting area 656,846,1078 cm 2︱Traverse Stroke 230 m/m︱
          Used hot chamber die casting machine DAW200F-DD with sprayer type FPS and MELTEC furnace type Z200 / 250. The machine was repaired by us as the manufacturer in 2018 and is available shortly.
            closing pressure 2200 kN
            clamping plate 755x755 mm
            distance between columns 500x500 mm
            weight of the machine ca. 8 t
            lock stroke 430 mm
            capacity of ejector 110 kN
            ejector stroke 100 mm
            height of form 250-600 mm
            column diameter 85 mm
            casting capacity 130 kN
            casting plunger stroke 175 m/m
            injection plunger diameter 70,80,90 mm
            casting volume (DIN 24480) 450,636,856 cm ³
            volume cast pressure 335,260,203 kp/cm²
            casting area 656,846,1078 cm 2
            Traverse Stroke 230 m/m
            Description :
            Used hot chamber die casting machine DAW200F-DD with sprayer type FPS and MELTEC furnace type Z200 / 250.
            The machine was repaired by us as the manufacturer in 2018 and is available shortly.
          Datasheet
          Request / Contact
          used  Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 80S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-982093 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 80S - - 2000 - Datacontrol RC

          Technical details
          closing pressure 900 kN︱clamping plate 540x540 mm︱distance between columns 350x350 mm︱weight of the machine ca. 5,5 t︱lock stroke 280 mm︱capacity of ejector 60 kN︱ejector stroke 70 mm︱height of form 160-400 mm︱column diameter 65 mm︱casting capacity 75 kN︱casting plunger stroke 130 mm︱injection plunger diameter 50,55,60 mm︱casting volume (DIN 24480) 119, 163, 214 cm 2︱volume cast pressure 380, 315, 265 kp/cm²︱casting area 236, 285, 340 cm 2︱Traverse Stroke 150 mm︱
          Used Die Casting machine DAW 80 S with Datacontrol real time control injection for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric multichamber furnace from Meltec Typ ZC80/180 and a pneumatic sprayer Spraymat 601. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 900 kN
            clamping plate 540x540 mm
            distance between columns 350x350 mm
            weight of the machine ca. 5,5 t
            lock stroke 280 mm
            capacity of ejector 60 kN
            ejector stroke 70 mm
            height of form 160-400 mm
            column diameter 65 mm
            casting capacity 75 kN
            casting plunger stroke 130 mm
            injection plunger diameter 50,55,60 mm
            casting volume (DIN 24480) 119, 163, 214 cm 2
            volume cast pressure 380, 315, 265 kp/cm²
            casting area 236, 285, 340 cm 2
            Traverse Stroke 150 mm
            Description :
            Used Die Casting machine DAW 80 S with Datacontrol real time control injection for the use of zinc alloys.
            Available from used machine stock.
            The machine is equipped with an electric multichamber furnace from Meltec Typ ZC80/180 and a pneumatic sprayer Spraymat 601.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used  Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 80S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-983776 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 80S - - 2000 - Datacontrol

          Technical details
          closing pressure 900 kN︱clamping plate 540x540 mm︱distance between columns 350x350 mm︱weight of the machine ca. 5,5 t︱lock stroke 280 mm︱capacity of ejector 60 kN︱ejector stroke 70 mm︱height of form 160-400 mm︱column diameter 65 mm︱casting capacity 75 kN︱casting plunger stroke 130 m/m︱injection plunger diameter 50,55,60 mm︱casting volume (DIN 24480) 119, 163, 214 cm 2︱volume cast pressure 380, 315, 265 kp/cm²︱casting area 236, 285, 340 cm 2︱Traverse Stroke 150 m/m︱
          Used Die Casting machine DAW 80 S with Datacontrol for the use of zinc alloys. Available from used machine stock. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 900 kN
            clamping plate 540x540 mm
            distance between columns 350x350 mm
            weight of the machine ca. 5,5 t
            lock stroke 280 mm
            capacity of ejector 60 kN
            ejector stroke 70 mm
            height of form 160-400 mm
            column diameter 65 mm
            casting capacity 75 kN
            casting plunger stroke 130 m/m
            injection plunger diameter 50,55,60 mm
            casting volume (DIN 24480) 119, 163, 214 cm 2
            volume cast pressure 380, 315, 265 kp/cm²
            casting area 236, 285, 340 cm 2
            Traverse Stroke 150 m/m
            Description :
            Used Die Casting machine DAW 80 S with Datacontrol for the use of zinc alloys.
            Available from used machine stock.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used  Hot-Chamber Diecasting Machine - Vertic. FRECH DAM 315 S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-982861 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAM 315 S - - 1999 - Datacontrol

          Technical details
          closing pressure 3150 kN︱clamping plate 900x900 mm︱distance between columns 550x550 mm︱weight of the machine ca. 15,5 t︱lock stroke 500 mm︱capacity of ejector 159 kN︱ejector stroke 120 mm︱height of form 300-700 mm︱column diameter 110 mm︱casting capacity 158 kN︱casting plunger stroke 250 mm︱injection plunger diameter 70,80,90,100 mm︱casting volume (DIN 24480) 514,791,1105,1455 cm 2︱volume cast pressure 410,316,249,201 kp/cm²︱casting area 768,996,1265,1597 cm 2︱Traverse Stroke 300 mm︱
          Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 3150 kN
            clamping plate 900x900 mm
            distance between columns 550x550 mm
            weight of the machine ca. 15,5 t
            lock stroke 500 mm
            capacity of ejector 159 kN
            ejector stroke 120 mm
            height of form 300-700 mm
            column diameter 110 mm
            casting capacity 158 kN
            casting plunger stroke 250 mm
            injection plunger diameter 70,80,90,100 mm
            casting volume (DIN 24480) 514,791,1105,1455 cm 2
            volume cast pressure 410,316,249,201 kp/cm²
            casting area 768,996,1265,1597 cm 2
            Traverse Stroke 300 mm
            Description :
            Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys.
            Available from used machine stock.
            The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          used  Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 200 GO


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-284802 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 200 GO - - 1999 - Datalogic

          Technical details
          closing pressure 2200 kN︱clamping plate 755x755 mm︱distance between columns 500x500 mm︱weight of the machine ca. 8 t︱lock stroke 430 mm︱capacity of ejector 110 kN︱ejector stroke 100 mm︱height of form 250-600 mm︱column diameter 85 mm︱casting capacity 130 kN︱casting plunger stroke 175 m/m︱injection plunger diameter 70,80,90 mm︱casting volume (DIN 24480) 450,636,856 cm ³︱volume cast pressure 335,260,203 kp/cm²︱casting area 656,846,1078 cm 2︱Traverse Stroke 230 m/m︱
          Used Die Casting machine DAW 200 GO with DataLogic control for the use of zinc alloys. Available directly from produktion. The machine was overhauled in 2017 by us as manufacturer. The machine is equipped with an electric furnace from Meltec Typ Z200/250 and electric servo sprayer Spraymotion 811Es. heating and cooling unit not included.
            closing pressure 2200 kN
            clamping plate 755x755 mm
            distance between columns 500x500 mm
            weight of the machine ca. 8 t
            lock stroke 430 mm
            capacity of ejector 110 kN
            ejector stroke 100 mm
            height of form 250-600 mm
            column diameter 85 mm
            casting capacity 130 kN
            casting plunger stroke 175 m/m
            injection plunger diameter 70,80,90 mm
            casting volume (DIN 24480) 450,636,856 cm ³
            volume cast pressure 335,260,203 kp/cm²
            casting area 656,846,1078 cm 2
            Traverse Stroke 230 m/m
            Description :
            Used Die Casting machine DAW 200 GO with DataLogic control for the use of zinc alloys.
            Available directly from produktion.
            The machine was overhauled in 2017 by us as manufacturer.
            The machine is equipped with an electric furnace from Meltec Typ Z200/250 and electric servo sprayer Spraymotion 811Es.
            heating and cooling unit not included.
          Datasheet
          Request / Contact
          used  Hot-Chamber Diecasting Machine - Vertic. FRECH DAW 80S


          • Oskar Frech GmbH & Co. KG
          • Schorndorfer Straße 32
          • 73614 Schorndorf-Weiler
          • Deutschland

          • +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
          • Schultheiss.Daniel@frech.com
            www.frech.com
          #2060-982331 · Hot-Chamber Diecasting Machine - Vertic.

          FRECH - DAW 80S - - 1998 - Datacontrol RC

          Technical details
          closing pressure 900 kN︱clamping plate 540x540 mm︱distance between columns 350x350 mm︱weight of the machine ca. 5,5 t︱lock stroke 280 mm︱capacity of ejector 60 kN︱ejector stroke 70 mm︱height of form 160-400 mm︱column diameter 65 mm︱casting capacity 75 kN︱casting plunger stroke 130 mm︱injection plunger diameter 50,55,60 mm︱casting volume (DIN 24480) 119, 163, 214 cm 2︱volume cast pressure 380, 315, 265 kp/cm²︱casting area 236, 285, 340 cm 2︱Traverse Stroke 150 mm︱
          Used Die Casting machine DAW 80 S with Datacontrol real time for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
            closing pressure 900 kN
            clamping plate 540x540 mm
            distance between columns 350x350 mm
            weight of the machine ca. 5,5 t
            lock stroke 280 mm
            capacity of ejector 60 kN
            ejector stroke 70 mm
            height of form 160-400 mm
            column diameter 65 mm
            casting capacity 75 kN
            casting plunger stroke 130 mm
            injection plunger diameter 50,55,60 mm
            casting volume (DIN 24480) 119, 163, 214 cm 2
            volume cast pressure 380, 315, 265 kp/cm²
            casting area 236, 285, 340 cm 2
            Traverse Stroke 150 mm
            Description :
            Used Die Casting machine DAW 80 S with Datacontrol real time for the use of zinc alloys.
            Available from used machine stock.
            The machine is equipped with an electric furnace from Rauch Typ MO50E. Without sprayer.

            Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          Oskar Frech GmbH  &  Co. KG   73614 Schorndorf-Weiler Schorndorfer Straße 32 Deutschland
          Oskar Frech GmbH & Co. KG

          Schorndorfer Straße 32



          Contact Trader


            Oskar Frech GmbH & Co. KG
           Schorndorfer Straße 32
            73614 Schorndorf-Weiler
            Deutschland
            +49 (0) 7181 / 702 - 159
            +49 (0) 7181 / 702 - 254
            Schultheiss.Daniel@frech.com
            www.frech.com
            Contact person:
          Herrn Daniel Schultheiß +49 (0) 7181 / 702 - 159

           




          Machine category


          Druckgußmaschine · Fräsmaschine - Horizontal · Förderband · Kaltkammerdruckgußmaschine - Horizontal · Motor · Waage · Warmkammerdruckgußmaschine - Horizontal · Warmkammerdruckgußmaschine - Vertikal · Zubehör Druckgußmaschinen ·