Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          ProdEq Trading GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe SCHAUBLIN 102 NVM


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41610 · Center Lathe

          SCHAUBLIN - 102 NVM - - 1979 -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 200 mm︱BED GAP / BRIDGE ︱- swing diameter in bridge 120 mm︱X/Z SLIDE ︱- Z-axis travel 400 mm︱- X-axis travel 400 mm︱TAILSTOCK ︱- distance betw. centers (max) 450 mm︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 380 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 1390 mm︱- space requirements -front/back- 550 mm︱- total height 1240 mm︱- total weight approx. 550 kg︱ATTACHMENTS (TURNING) ︱- tailstock: yes
          + very well maintained machine + incl. one set of clamping sleeves + incl. tool holder and turning chisel OPTIONAL tool cabinet: + hand tools + various three and four jaw chucks + hard and soft jaws
            - swing diameter (max) 200 mm
            - swing diameter in bridge 120 mm
            - Z-axis travel 400 mm
            - X-axis travel 400 mm
            - distance betw. centers (max) 450 mm
            - mains voltage 380 V
            - mains frequency 50 Hz
            - space requirements -left/right. 1390 mm
            - space requirements -front/back. 550 mm
            - total height 1240 mm
            - total weight approx. 550 kg
            - tailstock: yes
            Description :
            + very well maintained machine
            + incl. one set of clamping sleeves
            + incl. tool holder and turning chisel

            OPTIONAL tool cabinet:
            + hand tools
            + various three and four jaw chucks
            + hard and soft jaws
          Datasheet
          Request / Contact
          used  Center Lathe SCHAUBLIN 102 N


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41611 · Center Lathe

          SCHAUBLIN - 102 N - - 1965 -

          Technical details
          WORKING RANGE TURNING ︱- turning diameter (max) 200 mm︱TAILSTOCK ︱- distance betw. centers (max) 450 mm︱- sleeve stroke 80 mm︱- sleeve diameter 30 mm︱- taper: MK 2 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 1390 mm︱- space requirements -front/back- 550 mm︱- total height 1240 mm︱- total weight approx. 550 kg︱
          Scope: + Collets + Three-jaw chuck + tool holder + Tailstock
            - turning diameter (max) 200 mm
            - distance betw. centers (max) 450 mm
            - sleeve stroke 80 mm
            - sleeve diameter 30 mm
            - taper: MK 2
            - space requirements -left/right. 1390 mm
            - space requirements -front/back. 550 mm
            - total height 1240 mm
            - total weight approx. 550 kg
            Description :
            Scope:
            + Collets
            + Three-jaw chuck
            + tool holder
            + Tailstock
          Datasheet
          Request / Contact
          used  Center Lathe SCHAUBLIN 102 N


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41612 · Center Lathe

          SCHAUBLIN - 102 N - - 1964 -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 200 mm︱BED GAP / BRIDGE ︱- swing diameter in bridge 120 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 3000 /min︱TAILSTOCK ︱- distance betw. centers (max) 450 mm︱- sleeve stroke 80 mm︱- sleeve diameter 30 mm︱- taper: MK 2 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 1390 mm︱- space requirements -front/back- 550 mm︱- total height 1240 mm︱
            - swing diameter (max) 200 mm
            - swing diameter in bridge 120 mm
            - spindle revolutions (max) 3000 /min
            - distance betw. centers (max) 450 mm
            - sleeve stroke 80 mm
            - sleeve diameter 30 mm
            - taper: MK 2
            - space requirements -left/right. 1390 mm
            - space requirements -front/back. 550 mm
            - total height 1240 mm
          Datasheet
          Request / Contact
          used  Center Lathe OERLIKON DEOA 1000


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41620 · Center Lathe

          OERLIKON - DEOA 1000 - - 1962 -

          Technical details
          WORKING RANGE TURNING ︱- worpiece length max. 1000 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 3374 mm︱- space requirements -front/back- 900 mm︱- total height 1510 mm︱ATTACHMENTS (TURNING) ︱- tailstock: yes
          OPTIONAL tool cabinet: + hand tool + div. chip chucks + several tool holders + div. turning chisels for inside and outside + quill + steady rest
            - worpiece length max. 1000 mm
            - space requirements -left/right. 3374 mm
            - space requirements -front/back. 900 mm
            - total height 1510 mm
            - tailstock: yes
            Description :
            OPTIONAL tool cabinet:
            + hand tool
            + div. chip chucks
            + several tool holders
            + div. turning chisels for inside and outside
            + quill
            + steady rest
          Datasheet
          Request / Contact
          used  Center Lathe SIMONET DC


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41616 · Center Lathe

          SIMONET - DC - - -

          Technical details
          WORKING RANGE TURNING ︱- turning diameter (max) 130 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 14 /min︱- spindle revolutions (max) 2750 /min︱TAILSTOCK ︱- distance betw. centers (max) 400 mm︱- sleeve diameter 24 mm︱- taper: MK 1 ︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
          Machine in very well maintained condition + incl. tools and clamping devices
            - turning diameter (max) 130 mm
            - spindle revolutions (min) 14 /min
            - spindle revolutions (max) 2750 /min
            - distance betw. centers (max) 400 mm
            - sleeve diameter 24 mm
            - taper: MK 1
            - mains voltage 400 V
            Description :
            Machine in very well maintained condition
            + incl. tools and clamping devices
          Datasheet
          Request / Contact

          Chucking Automatic Lathe - Multi Spindle

          used  Chucking Automatic Lathe - Multi Spindle HK-CON L3²SDZ-12


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41893 · Chucking Automatic Lathe - Multi Spindle

          HK-CON - L3²SDZ-12 - - 2018 - SIEMENS 840 D SL

          Technical details
          BASIC FUNCTIONS ︱- design principle: front bed ︱- number of spindles 6 ︱- number of x/z slides 3 ︱- spdl. indexing device: yes ︱- live positions: yes ︱- number of c-axes 6 ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 100 kW︱DIMENSIONS / WEIGHTS ︱- total weight approx. 23000 kg︱
          6-spindle transfer lathe as double spindle machine for chuck turned parts with 3 operations and 2 direct transfers. With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously. The transfer of the parts between the 3 tool blocks is fully automated and by direct transfers without releasing the workpiece. Thus, a total of 6 spindles are always engaged at the same time. The scope includes: - Robot KUKA KR6 R900 sixx - blowing station - Measuring station - Marking laser Trumpf TruMark 5000 - infeed and outfeed belts
            - design principle: front bed
            - number of spindles 6
            - number of x/z slides 3
            - spdl. indexing device: yes
            - live positions: yes
            - number of c-axes 6
            - turning diameter (max) 125 mm
            - total power consumption 100 kW
            - total weight approx. 23000 kg
            Description :
            6-spindle transfer lathe as double spindle machine for chuck turned parts
            with 3 operations and 2 direct transfers.
            With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously.
            The transfer of the parts between the 3 tool blocks is fully automated
            and by direct transfers without releasing the workpiece.

            Thus, a total of 6 spindles are always engaged at the same time.

            The scope includes:
            - Robot KUKA KR6 R900 sixx
            - blowing station
            - Measuring station
            - Marking laser Trumpf TruMark 5000
            - infeed and outfeed belts
          Datasheet
          Request / Contact
          used  Chucking Automatic Lathe - Multi Spindle HK-CON L2²SDZ-8


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41897 · Chucking Automatic Lathe - Multi Spindle

          HK-CON - L2²SDZ-8 - - 2017 - SIEMENS 840 D SL

          Technical details
          BASIC FUNCTIONS ︱- design principle: front bed ︱- number of spindles 4 ︱- number of x/z slides 2 ︱- spdl. indexing device: yes ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 50 kW︱DIMENSIONS / WEIGHTS ︱- total weight approx. 15000 kg︱
          4-spindle transfer lathe as double spindle machine for chuck turned parts. With 2 operations and 1 direct transfer. With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously. The transfer of the parts between the 2 tool blocks is fully automated and by direct transfers without releasing the workpiece. Thus, a total of 4 spindles are always engaged simultaneously. The scope includes: - 2 Robot KUKA - measuring station - infeed table and outfeed belt
            - design principle: front bed
            - number of spindles 4
            - number of x/z slides 2
            - spdl. indexing device: yes
            - live positions: yes
            - turning diameter (max) 125 mm
            - total power consumption 50 kW
            - total weight approx. 15000 kg
            Description :
            4-spindle transfer lathe as double spindle machine for chuck turned parts.
            With 2 operations and 1 direct transfer.
            With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously.
            The transfer of the parts between the 2 tool blocks is fully automated
            and by direct transfers without releasing the workpiece.

            Thus, a total of 4 spindles are always engaged simultaneously.

            The scope includes:
            - 2 Robot KUKA
            - measuring station
            - infeed table and outfeed belt
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe CONTUR MSL-500


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-38370 · CNC Lathe

          CONTUR - MSL-500 - - 2017 - HEIDENHAIN CNC PILOT 640

          Technical details
          turning diameter mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 1 ︱- number of x/z slides 1 ︱- number of turrets 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- turning diameter (max) 370 mm︱- bar diameter (max) 74 mm︱- worpiece length max. 700 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 10 /min︱- spindle revolutions (max) 3500 /min︱- drive power S6 40% 27 kW︱X/Z SLIDE ︱- tool fixture: Turret
            - design principle: inclined bed
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            - live positions: no
            - turning diameter (max) 370 mm
            - bar diameter (max) 74 mm
            - worpiece length max. 700 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 3500 /min
            - drive power S6 40% 27 kW
            - tool fixture: Turret
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center HWACHEON HI-TECH 850 MC


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41340 · CNC Turning- and Milling Center

          HWACHEON - HI-TECH 850 MC - - 2018 - FANUC

          Technical details
          turning diameter 920 mm︱turning length 2500 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 1 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 920 mm︱- bar diameter (max) 164 mm︱- worpiece length max. 2500 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 1500 /min︱- number of gears 4 ︱- drive power 45 kW︱- spindle torque 6873 Nm︱- spindle bore diameter 164 mm︱
          Spindelhoures 1700h (TOP CONDITION) - Software for tool wear - Belt filter system (including additional tank) - 2-stage high pressure pump (10/30 bar) - Glass ruler in BMT 85 - Support for automatic bezel - BMT 85 tool turret
            turning diameter 920 mm
            turning length 2500 mm
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - number of c-axes 1
            - number of y-axes 1
            - turning diameter (max) 920 mm
            - bar diameter (max) 164 mm
            - worpiece length max. 2500 mm
            - spindle revolutions (max) 1500 /min
            - number of gears 4
            - drive power 45 kW
            - spindle torque 6873 Nm
            - spindle bore diameter 164 mm
            Description :
            Spindelhoures 1700h (TOP CONDITION)

            - Software for tool wear
            - Belt filter system (including additional tank)
            - 2-stage high pressure pump (10/30 bar)
            - Glass ruler in BMT 85
            - Support for automatic bezel
            - BMT 85 tool turret
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MIYANO BJ 26


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40671 · CNC Turning- and Milling Center

          MIYANO - BJ 26 - - 2002 - FANUC 21I-TB

          Technical details
          turning diameter mm︱turning length 60 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 1 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- swing diameter (max) 320 mm︱- bar diameter (max) 27 mm︱- worpiece length max. 60 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 80 /min︱- spindle revolutions (max) 8000 /min︱X/Z SLIDE ︱- rapid traverse Z 15000 mm/min︱- rapid traverse X 18000 mm/min︱
          Generally good and well-kept condition however, the 4th (lower) driven tool is defective. Furnishing: - IEMCO VIP 52/14 CNC bar loader 1500mm (1997)
            turning diameter mm
            turning length 60 mm
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - number of c-axes 1
            - number of y-axes 1
            - swing diameter (max) 320 mm
            - bar diameter (max) 27 mm
            - worpiece length max. 60 mm
            - spindle revolutions (min) 80 /min
            - spindle revolutions (max) 8000 /min
            - rapid traverse Z 15000 mm/min
            - rapid traverse X 18000 mm/min
            Description :
            Generally good and well-kept condition
            however, the 4th (lower) driven tool is defective.

            Furnishing:
            - IEMCO VIP 52/14 CNC bar loader 1500mm (1997)
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center NAKAMURA TW 10


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41874 · CNC Turning- and Milling Center

          NAKAMURA - TW 10 - - 1995 - FANUC

          Technical details
          turning diameter 205 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- number of turrets 2 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- swing diameter (max) 210 mm︱- turning diameter (max) 205 mm︱- bar diameter (max) 42 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 50 /min︱- spindle revolutions (max) 6000 /min︱COUNTER SPINDLE ︱- spindle revolutions (min) 50 /min︱- spindle revolutions (max) 6000 /min︱
          Very well maintained condition - Wear parts such as wipers and modules axle control were replaced. Equipment: - incl. tool holders
            turning diameter 205 mm
            turning length mm
            - number of spindles 2
            - number of turrets 2
            - live positions: yes
            - number of c-axes 2
            - number of y-axes 1
            - swing diameter (max) 210 mm
            - turning diameter (max) 205 mm
            - bar diameter (max) 42 mm
            - spindle revolutions (min) 50 /min
            - spindle revolutions (max) 6000 /min
            - spindle revolutions (min) 50 /min
            - spindle revolutions (max) 6000 /min
            Description :
            Very well maintained condition
            - Wear parts such as wipers and modules axle control were replaced.

            Equipment:
            - incl. tool holders
          Datasheet
          Request / Contact

          CNC-Vertical Turret Lathe - Single Col.

          used  CNC-Vertical Turret Lathe - Single Col. PIETRO CARNAGHI ATF 16 TM/S


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-36328 · CNC-Vertical Turret Lathe - Single Col.

          PIETRO - CARNAGHI ATF 16 TM/S - - 1995 - SIEMENS 840 C

          Technical details
          faceplate diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- live positions: yes ︱- number of c-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 1600 mm︱- worpiece length max. 1100 mm︱- workpiece weight max. 3000 kg︱FACING PLATE (TURNING MACHINE) ︱- diameter of surface plate 1000 mm︱- spindle revolutions (min) 10 /min︱- spindle revolutions (max) 800 /min︱- drive power 60 kW︱- c-axis: yes ︱CROSS BEAM SLIDE ︱- Z-axis travel 1000 mm︱- X-axis travel 1010 mm︱
          VTL with milling and grinding attachments. Boring and milling heads: 1 pc horizontal milling head with KM63 tool fixture 1 pc vertical milling head with KM63 tool fixture 1 pc angular milling head with KM40 tool fixture Grinding Spindles: 1 pc grinding spindle 220 mm dia 4 pc electro-spindles 4.5 kW, 8 kW, 16 kW, 20 kW ? partially with extensions Other attachments: 1 pc RENISHAW P10 probe 1 pc circular aligning unit with gallows 2 fold pallet system (however with one chuck only) 1 pc balancing and probing system 1 pc dressing unit 1 pc band filter 1 pc chip conveyor 1 pc electrostatic aspiration system Approx. 100 KM63 tool components, fixtures and monoblock turning tools among them 5 pc holders for internal turning 26 pc cylindrical holders 1 pc threading chuck 1 pc 4-jaw chuck Approx. 15 sets clamping jaws (4 jaws per set), among them soft, hard, aluminium, claw type
            - live positions: yes
            - number of c-axes 1
            - turning diameter (max) 1600 mm
            - worpiece length max. 1100 mm
            - workpiece weight max. 3000 kg
            - diameter of surface plate 1000 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 800 /min
            - drive power 60 kW
            - c-axis: yes
            - Z-axis travel 1000 mm
            - X-axis travel 1010 mm
            Description :
            VTL with milling and grinding attachments.

            Boring and milling heads:
            1 pc horizontal milling head with KM63 tool fixture
            1 pc vertical milling head with KM63 tool fixture
            1 pc angular milling head with KM40 tool fixture

            Grinding Spindles:
            1 pc grinding spindle 220 mm dia
            4 pc electro-spindles 4.5 kW, 8 kW, 16 kW, 20 kW ? partially with extensions

            Other attachments:
            1 pc RENISHAW P10 probe
            1 pc circular aligning unit with gallows
            2 fold pallet system (however with one chuck only)
            1 pc balancing and probing system
            1 pc dressing unit
            1 pc band filter
            1 pc chip conveyor
            1 pc electrostatic aspiration system
            Approx. 100 KM63 tool components, fixtures and monoblock turning tools
            among them 5 pc holders for internal turning
            26 pc cylindrical holders
            1 pc threading chuck
            1 pc 4-jaw chuck
            Approx. 15 sets clamping jaws (4 jaws per set),
            among them soft, hard, aluminium, claw type

          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled SCHAUBLIN 125 CCN


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41105 · Lathe - cycle-controlled

          SCHAUBLIN - 125 CCN - - 2018 - FANUC

          Technical details
          turning diameter 270 mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: flatbed ︱- number of spindles 1 ︱- number of x/z slides 1 ︱- live positions: yes ︱- number of c-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 270 mm︱- bar diameter (max) 32 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱X/Z SLIDE ︱- tool fixture: Turret ︱- tool fixture- turning: VDI 3425 ︱- number of tool positions (total) 8 ︱ELECTRICAL SPECIFICATIONS
          Machine in TOP condition: Control on : 2200 h Running time : 450 h
            turning diameter 270 mm
            turning length mm
            - design principle: flatbed
            - number of spindles 1
            - number of x/z slides 1
            - live positions: yes
            - number of c-axes 1
            - turning diameter (max) 270 mm
            - bar diameter (max) 32 mm
            - spindle revolutions (max) 5000 /min
            - tool fixture: Turret
            - tool fixture- turning: VDI 342.
            - number of tool positions (tota. 8
            Description :
            Machine in TOP condition:

            Control on : 2200 h
            Running time : 450 h
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled BOEHRINGER DUS 560/1000


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-39705 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560/1000 - - 1997 - KELLER CNCPLUS

          Technical details
          turning diameter 365 mm︱turning length 1000 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of x/z slides 1 ︱WORKING RANGE TURNING ︱- swing diameter (max) 570 mm︱- turning diameter (max) 365 mm︱- worpiece length max. 1000 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 3 /min︱- spindle revolutions (max) 2500 /min︱- number of gears 2 ︱- spindle diameter 62 mm︱X/Z SLIDE ︱- traverse velocity Z (min) 0 mm/min︱- traverse velocity Z (max) 10000 mm/min︱- traverse velocity X (min) 0 mm/min︱- traverse velocity X (max) 5000 mm/min︱
            turning diameter 365 mm
            turning length 1000 mm
            - number of x/z slides 1
            - swing diameter (max) 570 mm
            - turning diameter (max) 365 mm
            - worpiece length max. 1000 mm
            - spindle revolutions (min) 3 /min
            - spindle revolutions (max) 2500 /min
            - number of gears 2
            - spindle diameter 62 mm
            - traverse velocity Z (min) 0 mm/min
            - traverse velocity Z (max) 10000 mm/min
            - traverse velocity X (min) 0 mm/min
            - traverse velocity X (max) 5000 mm/min
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled KERN CD 650


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42028 · Lathe - cycle-controlled

          KERN - CD 650 - - 1996 - GRUNDIG MANUAL PLUS 360

          Technical details
          turning diameter 380 mm︱turning length 1000 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: flatbed ︱WORKING RANGE TURNING ︱- swing diameter (max) 650 mm︱- turning diameter (max) 380 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 670 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 1 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 2 ︱- drive power S6 40% 33 kW︱- drive power S1 100% 22 kW︱- spindle diameter 140 mm︱- spindle bore diameter 103 mm︱
            turning diameter 380 mm
            turning length 1000 mm
            - design principle: flatbed
            - swing diameter (max) 650 mm
            - turning diameter (max) 380 mm
            - worpiece length max. 1000 mm
            - swing in gap 670 mm
            - spindle revolutions (min) 1 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 2
            - drive power S6 40% 33 kW
            - drive power S1 100% 22 kW
            - spindle diameter 140 mm
            - spindle bore diameter 103 mm
            Description :

          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine RASOMA DZS 125-2


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41914 · Vertical Turning Machine

          RASOMA - DZS 125-2 - - 2016 - SIEMENS 840 D SL

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 2 ︱- number of x/z slides 2 ︱- number of turrets 2 ︱- live positions: no ︱- number of c-axes 2 ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 31 kW︱- drive power S1 100% 25.8 kW︱- spindle torque S1 100% 60 Nm︱X/Z SLIDE ︱- Z-axis travel 300 mm︱
          Vertical - two spindle turning center with pick-up spindle equipped with: - Raw parts conveyor - turning station in the machine room - measuring station - Finished parts conveyor
            - design principle: inclined bed
            - number of spindles 2
            - number of x/z slides 2
            - number of turrets 2
            - live positions: no
            - number of c-axes 2
            - turning diameter (max) 125 mm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 31 kW
            - drive power S1 100% 25.8 kW
            - spindle torque S1 100% 60 Nm
            - Z-axis travel 300 mm
            Description :
            Vertical - two spindle turning center with pick-up spindle
            equipped with:
            - Raw parts conveyor
            - turning station in the machine room
            - measuring station
            - Finished parts conveyor
          Datasheet
          Request / Contact
          used  Vertical Turning Machine RASOMA DZS 125-2


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41898 · Vertical Turning Machine

          RASOMA - DZS 125-2 - - 2016 - SIEMENS 840 D SL

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 31 kW︱- drive power S1 100% 25.8 kW︱- spindle torque S1 100% 60 Nm︱X/Z SLIDE ︱- Z-axis travel 300 mm︱- X-axis travel 1150 mm︱- rapid traverse Z 30000 mm/min︱- rapid traverse X 100000 mm/min︱
          Vertical - two spindle turning center with pick-up spindle equipped with: - Raw parts conveyor - turning station in the machine room - measuring station - Finished parts conveyor
            - number of spindles 2
            - number of turrets 2
            - live positions: yes
            - turning diameter (max) 125 mm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 31 kW
            - drive power S1 100% 25.8 kW
            - spindle torque S1 100% 60 Nm
            - Z-axis travel 300 mm
            - X-axis travel 1150 mm
            - rapid traverse Z 30000 mm/min
            - rapid traverse X 100000 mm/min
            Description :
            Vertical - two spindle turning center with pick-up spindle
            equipped with:
            - Raw parts conveyor
            - turning station in the machine room
            - measuring station
            - Finished parts conveyor
          Datasheet
          Request / Contact
          used  Vertical Turning Machine INDEX V 200


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42032 · Vertical Turning Machine

          INDEX - V 200 - - 1998 - INDEX C200-4

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- number of c-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 200 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱- c-axis: yes ︱X/Z SLIDE ︱- tool fixture: Turret ︱- - rotation speeds (max) 6000 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS
            - number of spindles 1
            - number of turrets 1
            - number of c-axes 1
            - turning diameter (max) 200 mm
            - spindle revolutions (max) 5000 /min
            - c-axis: yes
            - tool fixture: Turret
            - - rotation speeds (max) 6000 /min
            - mains voltage 400 V
            - mains frequency 50 Hz
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VSC 160


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41952 · Vertical Turning Machine

          EMAG - VSC 160 - - 1996 - BOSCH REXROTH MT200

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: vertical spindle ︱- number of spindles 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- swing diameter (max) 220 mm︱- turning diameter (max) 160 mm︱- worpiece length max. 170 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 8000 /min︱- drive power S6 40% 17 kW︱- drive power S1 100% 17 kW︱- spindle torque S6 40% 160 Nm︱X/Z SLIDE ︱- Z-axis travel 160 mm︱- X-axis travel 550 mm︱
          Last Overhaul: 2013 Installation consists of - 5 interlinked machines EMAG VSC 160 - continuous conveyor belt - common cooling lubricant system - all machines equipped with clamping blocks for 2 - 3 tools - retrofit to Bosch Rexroth CNC in 2013
            - design principle: vertical spi.
            - number of spindles 1
            - live positions: no
            - swing diameter (max) 220 mm
            - turning diameter (max) 160 mm
            - worpiece length max. 170 mm
            - spindle revolutions (max) 8000 /min
            - drive power S6 40% 17 kW
            - drive power S1 100% 17 kW
            - spindle torque S6 40% 160 Nm
            - Z-axis travel 160 mm
            - X-axis travel 550 mm
            Description :
            Last Overhaul: 2013
            Installation consists of
            - 5 interlinked machines EMAG VSC 160
            - continuous conveyor belt
            - common cooling lubricant system
            - all machines equipped with clamping blocks for 2 - 3 tools
            - retrofit to Bosch Rexroth CNC in 2013
          Datasheet
          Request / Contact
          used  Vertical Turning Machine INDEX V 200


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41934 · Vertical Turning Machine

          INDEX - V 200 - - 1996 - SIEMENS 805

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: vertical spindle ︱- number of spindles 1 ︱- live positions: no ︱X/Z SLIDE ︱- Z-axis travel 200 mm︱- X-axis travel 520 mm︱- rapid traverse X 30000 mm/min︱DIMENSIONS / WEIGHTS ︱- total weight approx. 3560 kg︱ATTACHMENTS (TURNING) ︱- self-centering chuck 1 ︱- - clamping diameter 160 mm︱- pallet changer and rotation system: yes ︱- - number of pallets 29 ︱- chip conveyor: yes
          Version with tool table 1054 x 400 mm Pallet circulation system PUS 160/29 Control Index C200-4
            - design principle: vertical spi.
            - number of spindles 1
            - live positions: no
            - Z-axis travel 200 mm
            - X-axis travel 520 mm
            - rapid traverse X 30000 mm/min
            - total weight approx. 3560 kg
            - self-centering chuck 1
            - - clamping diameter 160 mm
            - pallet changer and rotation sy.
            - - number of pallets 29
            - chip conveyor: yes
            Description :
            Version with tool table 1054 x 400 mm
            Pallet circulation system PUS 160/29

            Control Index C200-4
          Datasheet
          Request / Contact
          used  Vertical Turning Machine HESSAPP DVH 160


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42025 · Vertical Turning Machine

          HESSAPP - DVH 160 - - 1995 - BOSCH REXROTH MT200

          Technical details
          turning diameter 160 mm︱swing diameter 250 mm︱turning height 160 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: vertical spindle ︱- number of spindles 1 ︱- number of x/z slides 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- swing diameter (max) 250 mm︱- turning diameter (max) 160 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 50 /min︱- spindle revolutions (max) 8000 /min︱- drive power S1 100% 19 kW︱X/Z SLIDE ︱- Z-axis travel 350 mm︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 40 kW︱
          converted to current BOSCH REXROTH CNC
            turning diameter 160 mm
            swing diameter 250 mm
            turning height 160 mm
            - design principle: vertical spi.
            - number of spindles 1
            - number of x/z slides 1
            - live positions: no
            - swing diameter (max) 250 mm
            - turning diameter (max) 160 mm
            - spindle revolutions (min) 50 /min
            - spindle revolutions (max) 8000 /min
            - drive power S1 100% 19 kW
            - Z-axis travel 350 mm
            - total power consumption 40 kW
            Description :
            converted to current BOSCH REXROTH CNC
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column BLANSKO SKJ 32-63


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-22305 · Vertical Turret Lathe - Double Column

          BLANSKO - SKJ 32-63 - - 1983 - HEIDENHAIN POSITIP 850

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 6300 mm︱- worpiece length max. 2500 mm︱- workpiece weight max. 40000 kg︱FACING PLATE (TURNING MACHINE) ︱- diameter of surface plate 3200 mm︱- spindle revolutions (min) 0.8 /min︱- spindle revolutions (max) 80 /min︱- number of gears 2 ︱- continuous speed variation: no ︱- drive power 80 kW︱- spindle torque 115000 Nm︱- c-axis: no ︱CROSS BEAM ︱- W-axis travel 1900 mm︱- cross beam adjustment velocity 500 mm/min︱CROSS BEAM SLIDE ︱- Z-axis travel 1600 mm︱- X-axis travel 2200 mm︱- distance facing plate tool fixture (max) 2550 mm︱
          + hydrostatic table + horizontal column movement 1550 mm + single column VTL with movable column + 1 cross beam slide (with tilting) + 1 column slide slide + positioning and clamping the face plate + 8 pc. table extensions 1700 x 355 x 320mm + digital read out HEIDENHAIN + boring and milling spindle (motor to be repaired) ISO SK 50 taper, 0-1500 rpm, 18.5 kW + taper turning attachment + constant cutting speed for facing operations + documentaion ist available (without guarantee for completeness + correctness) The machine is dismantled and can be inspected in our warehouse.
            - swing diameter (max) 6300 mm
            - worpiece length max. 2500 mm
            - workpiece weight max. 40000 kg
            - diameter of surface plate 3200 mm
            - spindle revolutions (min) 0.8 /min
            - spindle revolutions (max) 80 /min
            - number of gears 2
            - continuous speed variation: no
            - drive power 80 kW
            - spindle torque 115000 Nm
            - c-axis: no
            - W-axis travel 1900 mm
            - cross beam adjustment velocity 500 mm/min
            - Z-axis travel 1600 mm
            - X-axis travel 2200 mm
            - distance facing plate tool fi. 2550 mm
            Description :
            + hydrostatic table
            + horizontal column movement 1550 mm
            + single column VTL with movable column
            + 1 cross beam slide (with tilting)
            + 1 column slide slide
            + positioning and clamping the face plate
            + 8 pc. table extensions 1700 x 355 x 320mm
            + digital read out HEIDENHAIN
            + boring and milling spindle (motor to be repaired)
            ISO SK 50 taper, 0-1500 rpm, 18.5 kW
            + taper turning attachment
            + constant cutting speed for facing operations
            + documentaion ist available (without guarantee for completeness + correctness)

            The machine is dismantled and can be inspected in our warehouse.
          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used  Floor Type Boring and Milling M/C - Hor. UNION BFP 125 I


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41896 · Floor Type Boring and Milling M/C - Hor.

          UNION - BFP 125 I - - 1974 -

          Technical details
          spindle diameter 125 mm︱x travel 5500 mm︱y travel 2000 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- X-axis travel 5500 mm︱- Y-axis travel 2000 mm︱- W-axis travel 415 mm︱FLOOR PLATE ︱- table surface (left-right) 3500 mm︱- table surface (front-back) 1750 mm︱TABLE ︱- table surface (left-right) 2000 mm︱- table surface (front-back) 2000 mm︱MILLING SPINDLE / HEAD ︱- spindle diameter 125 mm︱ATTACHMENTS ︱- angular milling head: yes ︱- digital display: yes ︱- coolant unit: yes
          Under power. A lot of equipment and tools. Plates 4 x 3500x1750 mm
            spindle diameter 125 mm
            x travel 5500 mm
            y travel 2000 mm
            - X-axis travel 5500 mm
            - Y-axis travel 2000 mm
            - W-axis travel 415 mm
            - table surface (left-right) 3500 mm
            - table surface (front-back) 1750 mm
            - table surface (left-right) 2000 mm
            - table surface (front-back) 2000 mm
            - spindle diameter 125 mm
            - angular milling head: yes
            - digital display: yes
            - coolant unit: yes
            Description :
            Under power.
            A lot of equipment and tools.
            Plates 4 x 3500x1750 mm
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal OKK HM 4


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42115 · Machining Center - Horizontal

          OKK - HM 4 - - 2004 - FANUC 160 IS MB

          Technical details
          x travel 560 mm︱y travel 510 mm︱z travel 560 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- X-axis travel 560 mm︱- Y-axis travel 510 mm︱- Z-axis travel 560 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (min) 100 /min︱- spindle revolutions (max) 12000 /min︱- spindle diameter 65 mm︱- tool fixture: ISO BT 40 ︱AXIS DRIVES ︱- rapid traverse 40000 mm/min︱TOOL MAGAZINE ︱- number of positions 60 ︱ELECTRICAL SPECIFICATIONS ︱- mains power supply 51 kVA︱- mains voltage 400 V︱
          Machine in very good and well maintained condition - Total running time approx. 9000h Equipment: - 6 additional pallets 400x400, - 2 clamping angles, - workpiece measuring system Renishaw OMP 60 (year 2020), - Extraction system Filtermist FX 4002
            x travel 560 mm
            y travel 510 mm
            z travel 560 mm
            - X-axis travel 560 mm
            - Y-axis travel 510 mm
            - Z-axis travel 560 mm
            - spindle revolutions (min) 100 /min
            - spindle revolutions (max) 12000 /min
            - spindle diameter 65 mm
            - tool fixture: ISO BT 40
            - rapid traverse 40000 mm/min
            - number of positions 60
            - mains power supply 51 kVA
            - mains voltage 400 V
            Description :
            Machine in very good and well maintained condition
            - Total running time approx. 9000h

            Equipment:
            - 6 additional pallets 400x400,
            - 2 clamping angles,
            - workpiece measuring system Renishaw OMP 60 (year 2020),
            - Extraction system Filtermist FX 4002
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Профіль трейдера: Prodeq Trading
          ТОВ

          Зв'язатися з трейдером



            Торгівля Prodeq
          ТОВ

           Опора 1
            9527 Niederhelfenschwil
            Швейцарія
            (0041) 71 - 948 7060 "> (0041) 71 - 948 7060
            (0041) 71 - 948 7069
            info@prodeq.ch
            www.prodeq.ch

          Профіль Трейдера

          Група ProdEq - Партнер промисловості.
          Оптова торгівля металообробним устаткуванням.
           
          Ми продаємо та купуємо:
          • верстати
          • машини для виготовлення металу
          • використовується промислове обладнання
          • повні рослини
          Міжнародність:
          наш мережа міжнародних продажів надає доступ до світових ринків використовуваних / уживаних машин.


          Інтернет-каталог обладнання:
          Пошук і пошук потрібного обладнання та верстата (ЧПУ або без ЧПУ) в нашому інтернет-каталозі. Всі машини для продажу публікуються з вичерпною інформацією.

          Великі проекти - невеликі проекти:
          Ми здійснюємо аукціони та ліквідації та здійснюємо продаж вашого додаткового обладнання. Будь ласка, зв'яжіться з нами при будь-якому майбутньому продажу додаткових активів. Ми торгуємо окремі машини а також комплектні промислові підприємства.

          Експертиза:
          Незалежно, якщо ви продаєте або купуєте вживані машини або обладнання. Базуйте своє рішення про продаж на нашій оцінці та вашому рішенні про покупку на нашій технічній консультації.

          Більш ніж уживані:
          Ми також торгуємо обраним портфелем компанії нове обладнання, просто запитайте нас.


          Торгівля та послуги:
          Попросіть післяпродажних послуг, таких як демонтаж, капітальний ремонт, транспортування, імпорт та експорт та фінансування

          Машини та обладнання:


          ProdEq Trading GmbH
          Холдинг 1, 9527 Niederhelfenschwil, Швейцарія


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ладіс, Австрія


          ProdEq Deutschland GmbH
          Weberweg 2, 42499 Hückeswagen, Німеччина


          Post-Venta Carreras SA
          Pol. Els Plans d'Arau, C / Ніколау Коперніч 2, 08787 La Pobla de Claramunt, Іспанія


          Guerrieri srl
          Площа Джоусі Кардуччі 6, 21100 Varese (VA), Італія


          ProdEq doo Магазин з промисловими машинами
          Opekarniska 4, 2327 Race, Словенія


          Представництво ProdEq Maschinenhandel GmbH
          16110 Nilüfer / Bursa, Туреччина


          Інші представництва: Мексика, Іран
          Для отримання додаткової інформації зверніться до одного з вищезгаданих відділень ProdEq.




          Prodeq Trading GmbH  9527 Niederhelfenschwil Reckholder 1 Schweiz
          Prodeq Trading GmbH

          Reckholder 1



          Contact Trader


            Prodeq Trading GmbH
           Reckholder 1
            9527 Niederhelfenschwil
            Schweiz
            (0041)71 - 948 7060
            (0041)71 - 948 7069
            info@prodeq.ch
            www.prodeq.ch
            Contact person:

           




          Machine category


          · 4-Säulenpresse - Hydraulisch · Anfasmaschinen · Aufspanntisch · Bandanlage · Bandschleifmaschine · Bandsäge · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC-Karusselldrehmaschine - Einständer · Container · Doppelscheibenschleifmaschine · Doppelscheibenschleifmaschine - vertik. · Doppelständer - Kurbelpresse · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Drahtwalzwerke · Drehmaschine - zyklengesteuert · Einsenkpresse · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Feinstanzpresse · Filteranlage · Fräskopf senkrecht · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Horizontale - Flachschleifmaschine · Hydraulische - Abkantpresse · Hydraulische Presse · Hämmermaschine · Höhenmikrometer · Karusselldrehmaschine - Doppelständer · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Krananlage · Kreisschere · Kühlmittelanlage · Langgewinde- und Abwälzfräsmaschine · Laserbeschriftungsmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Mehrspindelfutterautomat · Ofen · Plattenbohrwerk - Horizontal · Portalfräsmaschine · Profilprojektor · Punktschweißmaschine · Rundschleifmaschine - Außen · Rundtaktmaschine · Schleifbock · Schnellradialbohrmaschine · Sinterpresse · Stanzautomat · Teilapparat · Tiefziehpresse - Hydraulik · Tischbohrwerk · Transferpresse · Universalschleifmaschine · Vertikal - Rundtischflachschleifmaschine · Vertikaldrehmaschine · Vertikale - Flachschleifmaschine · Vorschubapparat · Waage · Waschanlage - Durchlauf · Waschanlage - Kammer · Wasseraufbereitung · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Zugprüfmaschine ·