Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Cutting machines

          Machinelist: Cutting machines


          Cutting machines

          used Cutting Cutting machines Pugno Plattenschneidmaschine  C926


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H201101 · Cutting machines

          Pugno - Plattenschneidmaschine C926 - - n.b. -

          Technical details
          cross-section width: 800 mm︱cross-section heigth: 15 mm︱feed: ab ca. 5 mm︱speed of feed: m/min︱cuts max.: Schnitte/m︱
          condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards; - New on-board system machine; - New control cabinet with PLC system Siemens S7-1200; - CE marking; - Instructions for use and maintenance in English or German language
            cross-section width: 800 mm
            cross-section heigth: 15 mm
            feed: ab ca. 5 mm
            Description :
            condition: used, overhauled

            Specification: Panel cutting machine -
            overhauled with CE

            - Section width max.approx.: 800 mm
            - Section height max.: 15 mm, depending on the hardness
            of the rubber sheets
            - Cutting length from approx.: 5 mm (depending on material)
            - cutting force approx.: 10 tons
            - Connected load approx.: 1.8 kW
            - Painting: green
            - Operating voltage: 3 x 400V, 50Hz, N, PE
            - Dimensions approx.: 1,200 x 1,450 x 1,950 mm
            - Safety devices according to current standards;
            - New on-board system machine;
            - New control cabinet with PLC system Siemens S7-1200;
            - CE marking;
            - Instructions for use and maintenance in English or German language

          Datasheet
          Request / Contact
          used Cutting Cutting machines HANS VON DER HEYDE Mitlaufende Saege MA Move


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200705 · Cutting machines

          HANS VON DER HEYDE - Mitlaufende Saege MA Move - - 2016/17 -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱
            cross-section width: 100 mm
            cross-section heigth: 50 mm
            feed: 10 - 999.999,9 mm
            speed of feed: 1 - 50 m/min
          Datasheet
          Request / Contact
          used Cutting Cutting machines Haeuser Vorrichtungsbau Stanzvorrichtung WABS


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H190701 · Cutting machines

          Haeuser Vorrichtungsbau - Stanzvorrichtung WABS - - 2016 -

          Technical details
          cross-section width: 90 mm︱cross-section heigth: 35 mm︱feed: 1.600 mm︱
            cross-section width: 90 mm
            cross-section heigth: 35 mm
            feed: 1.600 mm
          Datasheet
          Request / Contact
          used Cutting Cutting machines HANS VON DER HEYDE Mitlaufende Saege MA Move


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200704 · Cutting machines

          HANS VON DER HEYDE - Mitlaufende Saege MA Move - - 2015 -

          Technical details
          cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱
            cross-section width: 100 mm
            cross-section heigth: 50 mm
            feed: 10 - 999.999,9 mm
            speed of feed: 1 - 50 m/min
          Datasheet
          Request / Contact
          used Cutting Cutting machines BASTON TSQ-P-503-100


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H180601 · Cutting machines

          BASTON - TSQ-P-503-100 - - 2011 -

          Technical details
          cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱speed of feed: 0,4 - 20 m/min︱
            cross-section width: -- mm
            cross-section heigth: -- mm
            feed: -- mm
            speed of feed: 0,4 - 20 m/min
          Datasheet
          Request / Contact
          used Cutting Cutting machines METZNER MASCHINENBAU Ablaengautomat MBS 31117


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H190702 · Cutting machines

          METZNER MASCHINENBAU - Ablaengautomat MBS 31117 - - 2006 -

          Technical details
          cross-section width: 16 mm︱cross-section heigth: 16 mm︱feed: - mm︱speed of feed: 60 m/min︱cuts max.: - Schnitte/m︱
            cross-section width: 16 mm
            cross-section heigth: 16 mm
            feed: - mm
            speed of feed: 60 m/min
            cuts max.: - Schnitte/m
          Datasheet
          Request / Contact
          used Cutting Cutting machines HEIDELBERG Querschneidmaschine Polar 155


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H200901 · Cutting machines

          HEIDELBERG - Querschneidmaschine Polar 155 - - 1991 -

          Technical details
          cross-section width: 1.550 mm︱cross-section heigth: 100 mm︱feed: 10 - 1.500 mm︱
          Condition: used, Specification: Cross cutting machine for panels Model POLAR 155 EMC-MONITOR - Working width: 1,550 mm - Insert height approx.: 165 mm depending on material - insertion depth: 1,550 mm - feed: 10 - 1.500 mm - Main drive power: 5,5 KW - Width without storage table: 2,790 mm with storage tables: 3,550 mm - depth: 2,950 mm - height: 1.730 mm - front table length: 750 mm - table height: 900 mm - Weight: 4.120 kg - Pressing pressure min.: 150 kp max.: 4.500 kp - knife thickness: 137,5 mm - Feed speed slow / fast: 2.7 / 15.8 cm/sec.
            cross-section width: 1.550 mm
            cross-section heigth: 100 mm
            feed: 10 - 1.500 mm
            Description :
            Condition: used,

            Specification: Cross cutting machine for panels
            Model POLAR 155 EMC-MONITOR

            - Working width: 1,550 mm
            - Insert height approx.: 165 mm depending on material
            - insertion depth: 1,550 mm
            - feed: 10 - 1.500 mm
            - Main drive power: 5,5 KW
            - Width without storage table: 2,790 mm
            with storage tables: 3,550 mm
            - depth: 2,950 mm
            - height: 1.730 mm
            - front table length: 750 mm
            - table height: 900 mm
            - Weight: 4.120 kg
            - Pressing pressure min.: 150 kp
            max.: 4.500 kp
            - knife thickness: 137,5 mm
            - Feed speed
            slow / fast: 2.7 / 15.8 cm/sec.

          Datasheet
          Request / Contact
          used Cutting Cutting machines MAX MÜLLER KME 30


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H210301 · Cutting machines

          MAX MÜLLER - KME 30 - - 1977 -

          Technical details
          cross-section width: 30 mm︱cross-section heigth: 30 mm︱feed: 1 - 100.000 mm︱speed of feed: 36 m/min︱cuts max.: 100 Schnitte/m︱
          Condition: used, Specification: Circular Knife Cutting Machine - second-hand for cutting rings, discs and profiles - Diameter max.: 5 - 30 mm - Number of hoses/strands max.: 1-5 - Feed rate: 36 m/min - Cutting performance max.: 100 cuts/min depending on material and cutting length - cutting length: 1 - 100.000 mm - Feed by clutch/brake system - Cutting by means of a clutch system - Cycled feed rate - Connected load approx.: 2 kW - Operating voltage: 3 x 400V, 50Hz, N, PE - Weight approx.: 320 kg - Dimensions (L/W/H): 1,700 x 800 x 900 mm Special equipment machine: - Standstill monitoring - 5-fold cutting unit Additional equipment: - Feeding device ZF with sag control
            cross-section width: 30 mm
            cross-section heigth: 30 mm
            feed: 1 - 100.000 mm
            speed of feed: 36 m/min
            cuts max.: 100 Schnitte/m
            Description :
            Condition: used,

            Specification: Circular Knife Cutting Machine - second-hand
            for cutting rings, discs and profiles

            - Diameter max.: 5 - 30 mm
            - Number of hoses/strands max.: 1-5
            - Feed rate: 36 m/min
            - Cutting performance max.: 100 cuts/min
            depending on material and cutting length
            - cutting length: 1 - 100.000 mm
            - Feed by clutch/brake system
            - Cutting by means of a clutch system
            - Cycled feed rate
            - Connected load approx.: 2 kW
            - Operating voltage: 3 x 400V, 50Hz, N, PE
            - Weight approx.: 320 kg
            - Dimensions (L/W/H): 1,700 x 800 x 900 mm

            Special equipment machine:
            - Standstill monitoring
            - 5-fold cutting unit

            Additional equipment:
            - Feeding device ZF with sag control

          Datasheet
          Request / Contact
          used Cutting Cutting machines MK Maschinenbau Kubitza GmbH CUT1-XL R/L


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-H210501 · Cutting machines

          MK Maschinenbau Kubitza GmbH - CUT1-XL R/L - - 07.2018 -

          Technical details
          cross-section width: 120 mm︱cross-section heigth: 40 mm︱feed: - mm︱speed of feed: 99 m/min︱cuts max.: 300 Schnitte/m︱
          Condition: used - good condition Specification: cutting machine for flexible rubber and soft PVC profiles, without metal part - used - pneumatic cutting unit with punching cut on support - belt width approx.: 120 mm - cutting height approx.: 40 mm - blade size: 142 x 90 mm - Contact length approx.: 210 mm - Belt speed: 99 m/min - Pneumatic belt adjustment - Upper belt adjustment via crank - Trigger belt approx.: 1,000 mm - Profile infeed and profile guide - Electrical connection: 3x400V, 50Hz, N, PE - Control voltage: 230VAC, 24VDC, 5VDC - Max. Back-up fuse: 16 A - Power consumption: 4 KW - Control Siemens, touch panel KTP700, with recipe management - Pressure: 6 bar - Painting: Frame/protective device: RAL 9006/RAL 1021 Control cabinet: RAL 7035 - Dimensions L/W/H approx.: 2,500 x 1,000 x 2,000 mm - Weight approx.: 600 kg - Material flow direction from right to left - Mobile version, with adjustable feet with hand wheel Sag control infinitely variable control of the feed portal Option
            cross-section width: 120 mm
            cross-section heigth: 40 mm
            feed: - mm
            speed of feed: 99 m/min
            cuts max.: 300 Schnitte/m
            Description :
            Condition: used - good condition

            Specification: cutting machine for flexible rubber and soft PVC profiles,
            without metal part - used

            - pneumatic cutting unit with punching cut on support
            - belt width approx.: 120 mm
            - cutting height approx.: 40 mm
            - blade size: 142 x 90 mm
            - Contact length approx.: 210 mm
            - Belt speed: 99 m/min
            - Pneumatic belt adjustment
            - Upper belt adjustment via crank
            - Trigger belt approx.: 1,000 mm
            - Profile infeed and profile guide
            - Electrical connection: 3x400V, 50Hz, N, PE
            - Control voltage: 230VAC, 24VDC, 5VDC
            - Max. Back-up fuse: 16 A
            - Power consumption: 4 KW
            - Control Siemens, touch panel KTP700, with recipe management
            - Pressure: 6 bar
            - Painting: Frame/protective device: RAL 9006/RAL 1021
            Control cabinet: RAL 7035
            - Dimensions L/W/H approx.: 2,500 x 1,000 x 2,000 mm
            - Weight approx.: 600 kg
            - Material flow direction from right to left
            - Mobile version, with adjustable feet with hand wheel

            Sag control infinitely variable control of the feed portal Option

          Datasheet
          Request / Contact
          used Cutting Cutting machines MEB SM 15/130


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181001 · Cutting machines

          MEB - SM 15/130 - - -

          Technical details
          speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 130 mm︱cross-section heigth: 15 mm︱
            speed of feed: 40 m/min
            feed: 1 - 99.999,9 mm
            cuts max.: 200 Schnitte/m
            cross-section width: 130 mm
            cross-section heigth: 15 mm
          Datasheet
          Request / Contact
          used Cutting Cutting machines MEB SM 85


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-N181003 · Cutting machines

          MEB - SM 85 - - -

          Technical details
          cross-section width: 85 mm︱cross-section heigth: 25 - 40 mm︱feed: 1 - 999,999,9 mm︱speed of feed: 60 m/min︱cuts max.: 100 - 120 Schnitte/m︱
            cross-section width: 85 mm
            cross-section heigth: 25 - 40 mm
            feed: 1 - 999,999,9 mm
            speed of feed: 60 m/min
            cuts max.: 100 - 120 Schnitte/m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •