Plants complete

machine measurements 6.850 x 3.600 x 1.900 mm︱machine weight 5.000 kg︱power capacity 9 kW︱

---

Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection. - CE certified is available - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm - Weight approx.: 5,000 kg - Paint finish: RAL 9003 - Voltage: 220V AC, 50 Hz - Total power approx.: 9 kW

machine measurements 9.657 x 1.472 x 1.985 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled

machine measurements 3.000 mm︱machine weight -- kg︱power capacity 90 kW︱

---

machine measurements 8.000 mm︱machine weight 9.800 kg︱power capacity 17,5 kW︱

---

Condition: used Specification: Batch-off plant – used - max. width rubber sheet: 600 mm - thickness rubber sheet: 4 – 10 mm - distance between banging bars: effective 140 mm - max. pendant length hanging sheet: 3600 mm - take-off linear speed: 4 – 35 m/min. frequency control of motor speed linear speed: - swinging: 0 – 40 m/min. - hinging: 0 – 1,55 m/min. - no. of cooling fans: 10 set - power cooling fans: 0,75 kW/set - total length of line: 8.000 mm - total power: 17,5 kW - final temperature sheet: room temperature +5°C - compressed air pressure: 0,4 – 0,6 Mpa - cross and longitudinal cutter, wig-wag packer for pallets - total weight: ca. 9800 kg STUCTURAL FEATURES: 1. take-off device is off the ring type conveyor belt with guide strip and without any union or joint, and equips with printer. Take-off conveyor belt, lifting and dip-in wire mesh belt all share one same frequency conversion AC speed regulating motor, which the conveying speed could be adjustable. 2. lifting bar is driven by one set cycloid pin wheel speed reducer through AC frequency conversion and the bar speed is synchronous as the speed of lifting device. 3. the sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying. 4. the hanging up area is fully closed, which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect.

machine measurements 12.200x1.800x800 mm︱machine weight 1.040 kg︱power capacity 27 kW︱

---

machine measurements 2.200 x 1.200 x 2.260 mm︱machine weight 1.000 kg︱power capacity -- kW︱

---

Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg

machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱

---

Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.

machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱

---

Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.

machine measurements 20.000 x 2.580 x 2.350 mm︱machine weight 6.000 kg︱power capacity 120 kW︱

---

Condition: used - was in production until approx. mid November 2021 Specification: Hot air duct with cooling duct underneath - duct type: HLK 114 gas, gas heated - duct length: 18.000 mm - belt width: 150 mm - Belt lengths: - Upper belt: 39,430 mm - Middle belt: 38,110 mm - Lower belt: 37,360 mm - Max. profile height: 60 mm - Transport speed: 4 - 40 m/min - Drive motors: permanent-magnet gear motor 3x 0.37 kW, 170 V - Belt control motors: Three-phase motor 3x 0.045 kW, 220/380V/50Hz - Blow-in fan: RD7, 220/380V50Hz, 2.2 kW - Main exhaust fan: HRD 65/7, 380V/50Hz, 7.5 kW - Number of heating zones: 6x gas-heated - Gas burner: Nominal power: 20 kW/burner - Air temperature max.: 320°C - All ducts with fire extinguishing nozzles Cooling duct: - Drive motors: Permanent power geared motor 2x 0.37 kW, 170 V - Side channel compressor: SD 740, 380V/50Hz, 6 kW - Channel length: 18,000 mm - Belt lengths: Upper belt: 37,550 mm Lower belt: 38,890 mm - Belt width: 180 mm - Profile height max.: 60 mm - Transport speed: 4 - 40 m/min Documentation available in German. The gas burners were regularly serviced and replaced as required. - Heat exchanger: WT 160 G - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm (with platform for installation above of the duct) - Total weight of heat exchanger approx.: 1,000 kg with platform

machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱

---

Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015

machine measurements ca. 12.000 mm︱machine weight -- kg︱power capacity -- kW︱ 550 mm︱

---