Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Frame press

          Machinelist: Frame press


          Frame press

          used Window production: wood Frame press SCHAFBERGER + SPROEDHUBER Super - Video


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6542 · Frame press

          SCHAFBERGER + SPROEDHUBER - Super - Video - - neuwertig -

          Technical details
          Working width 3500 mm︱Working height 2600 mm︱Number of cylinders 5 St.︱loading dimensions L x W x H 8000x 2400 x 2600 mm︱Dimensions (L/W/H) 5200 x1800 x 3700 mm︱
          S + S electrohydraulic FRAME PRESS MACHINE type SUPER with automatic setting for corner connection of tenon and slots CE version The only self-converting high-performance fully automatic frame press, in which the Woods no longer have to be pre-inserted. The width and height setting is achieved by directly inserting the workpieces into the press area without wasting time, accomplished. The super class frame press. Basic machine in the strongest frame welded construction, made of oversized, thick-walled special hollow profiles. Guideways for pressure beams and sliding slides in low-abrasion, wide planed version. Continuous abutment on the left in heavy duty design, for Width pressing, built on base frame. Continuous abutment in the heaviest version directly with Base frame and machine base connected. 500 mm insertion height. All abutments can be finely adjusted for absolute Angular accuracy and long-term precision. Slide carriage on the right with fast, automatic-motorized Width adjustment with guaranteed parallel operation. Automatic, hydraulic locking. Central drive for Dimensional adjustment horizontally and vertically, with high in and out Adjustment speed and automatic width and height adjustment (Opto-electronic). 2 vertical pressure cylinders, double-acting, with 250 mm cylinder stroke and 2000 kp Pressure force, adjustable. 2 horizontal pressure cylinders, double-acting, with 80 mm cylinder stroke and 1850 kp Pressure force, adjustable. Press corner upper right, in heavy, milled version, with automatic Eckeinstellung. non-binding press corners Glue-resistant design contact surfaces Abutment and pressure plate depth = 100 mm 8-fold holding and positioning device, for the absolutely loose insertion of all Single pieces of wood in the press area (without plugging in and plugging in). This means that each frame part is held twice and positioned Automatic double clamping and positioning device for the upper frame timber, with integrated automatic Workpiece transport (saving time and handling with large frames). All frame single pieces of wood are placed directly in the pressing area. Program options: manually motorized via push button, fully automatic about optoelectronics for Dimension setting including automatic press cycle in connection with Safety light barrier. Automatic, clock-controlled press cycle by pulsing, press vertically - loosen - horizontally - press - loosen - press vertically / horizontally. Control cabinet conveniently mounted on the left of the base frame. State of the art PLC control with fault diagnosis (battery-free). Fast, optoelectronic dimensional adjustment Hydraulic supply system, adjustable from 25 to 100 bar. Electric hand control, freely positionable, for quick work, especially for large and complicated ones Frame constructions (with set timbers and fighters) for one-man operation. Occupational safety package with safety light barrier, covered rear wall and Lateral protection against intrusion according to the EU machine directive Electrical equipment: Total connected load: 3 kW, 400 V / 50 Hz. Pneumatic connection: R 1/4 ", max. 8 bar Painting: RAL 7035 light gray with RAL 5018 turquoise blue Working size: 3500 mm x 2600 mm (length x height) Including the following options: Medium pressure bar with automatic height adjustment, complete with pressure cylinder, pressure hose and shut-off valve up to 2600 mm high Single pressure control f. Medium pressure beam (for pressing cross-bar windows) Shut-off valve on the 3rd vertical cylinder Intermediate allowance for small dimension pressing to bridge the 1st pressure beam, shut-off valve on the 1st vertical cylinder Triangle studio window pressing device - only possible in manual mode - (Solid, quick-change pressure plates with dovetail guide) consisting of: locking device of the vertical pressure beam, 4 attachable side-guided pendulum pressure plates and controllers, Central drive with individual, pneumatic decoupling of the Vertical pressure cylinder. (This makes the setting independent of each other given at any working height) all overlays, pressure plates and abutments covered with plastic Transport dimensions: 520 x 180 x 375 cm (L x W x H) Weight: 3,600 kg VIDEO shows press of the same model (Technical description according to the manufacturer - without guarantee!)
            Working width 3500 mm
            Working height 2600 mm
            Number of cylinders 5 St.
            loading dimensions L x W x H 8000x 2400 x 2600 mm
            Dimensions (L/W/H) 5200 x1800 x 3700 mm
            Description :
            S + S electrohydraulic
            FRAME PRESS MACHINE type SUPER
            with automatic setting for corner connection of tenon and slots

            CE version
            The only self-converting high-performance fully automatic frame press, in which
            the Woods no longer have to be pre-inserted. The width and height setting
            is achieved by directly inserting the workpieces into the press area without
            wasting time,
            accomplished. The super class frame press.

            Basic machine in the strongest frame welded construction, made of oversized,
            thick-walled special hollow profiles.
            Guideways for pressure beams and sliding slides in low-abrasion,
            wide planed version.

            Continuous abutment on the left in heavy duty design, for
            Width pressing, built on base frame.

            Continuous abutment in the heaviest version directly with
            Base frame and machine base connected.
            500 mm insertion height. All abutments can be finely adjusted for absolute
            Angular accuracy and long-term precision.

            Slide carriage on the right with fast, automatic-motorized
            Width adjustment with guaranteed parallel operation.

            Automatic, hydraulic locking. Central drive for
            Dimensional adjustment horizontally and vertically, with high in and out
            Adjustment speed and automatic width and height adjustment
            (Opto-electronic).

            2 vertical pressure cylinders, double-acting, with 250 mm cylinder stroke and
            2000 kp
            Pressure force, adjustable.
            2 horizontal pressure cylinders, double-acting, with 80 mm cylinder stroke and
            1850 kp
            Pressure force, adjustable.
            Press corner upper right, in heavy, milled version, with automatic
            Eckeinstellung.
            non-binding press corners
            Glue-resistant design contact surfaces
            Abutment and pressure plate depth = 100 mm
            8-fold holding and positioning device, for the absolutely loose insertion of all
            Single pieces of wood in the press area
            (without plugging in and plugging in). This means that each frame part is held
            twice and positioned

            Automatic double clamping and positioning device for the upper frame timber,
            with integrated automatic
            Workpiece transport (saving time and handling with large frames).
            All frame single pieces of wood are placed directly in the pressing area.

            Program options: manually motorized via push button, fully automatic
            about optoelectronics for
            Dimension setting including automatic press cycle in connection with
            Safety light barrier.
            Automatic, clock-controlled press cycle by pulsing, press vertically
            - loosen - horizontally - press - loosen - press vertically / horizontally.

            Control cabinet conveniently mounted on the left of the base frame. State of
            the art
            PLC control with fault diagnosis (battery-free). Fast, optoelectronic
            dimensional adjustment

            Hydraulic supply system, adjustable from 25 to 100 bar.

            Electric hand control, freely positionable, for quick work, especially
            for large and complicated ones
            Frame constructions (with set timbers and fighters) for one-man operation.

            Occupational safety package with safety light barrier, covered rear wall and
            Lateral protection against intrusion according to the EU machine directive

            Electrical equipment:
            Total connected load: 3 kW, 400 V / 50 Hz.
            Pneumatic connection: R 1/4 ", max. 8 bar

            Painting: RAL 7035 light gray with RAL 5018 turquoise blue

            Working size: 3500 mm x 2600 mm (length x height)

            Including the following options:


            Medium pressure bar with automatic height adjustment, complete
            with pressure cylinder, pressure hose and shut-off valve up to 2600 mm high

            Single pressure control f. Medium pressure beam (for pressing cross-bar windows)

            Shut-off valve on the 3rd vertical cylinder

            Intermediate allowance for small dimension pressing to bridge the 1st pressure
            beam,
            shut-off valve on the 1st vertical cylinder

            Triangle studio window pressing device
            - only possible in manual mode -
            (Solid, quick-change pressure plates with dovetail guide)
            consisting of: locking device of the vertical pressure beam,
            4 attachable side-guided pendulum pressure plates and controllers,
            Central drive with individual, pneumatic decoupling of the
            Vertical pressure cylinder. (This makes the setting independent of each other
            given at any working height)


            all overlays, pressure plates and abutments covered with plastic


            Transport dimensions: 520 x 180 x 375 cm (L x W x H)
            Weight: 3,600 kg

            VIDEO shows press of the same model

            (Technical description according to the manufacturer - without guarantee!)

          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Multipress Lochplattenpresse


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5956 · Frame press

          S&S - Multipress Lochplattenpresse - - neu -

          Technical details
          Working width 3500 mm︱Working height 2650 mm︱Number of cylinders nach Wahl St.︱
            Working width 3500 mm
            Working height 2650 mm
            Number of cylinders nach Wahl St.
          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5845 · Frame press

          S&S - RP 2000 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S T 35


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6030 · Frame press

          S&S - T 35 - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
          Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
            Description :
            Stable frame welded construction of thick-walled
            Special hollow profiles , sliding table and pressure beam with
            50 mm hole pattern .

            On the left side continuous abutment for grouting the wide ,
            lower abutment in 2 levels.

            Vertical pressing cylinder on specialty bar with one-
            quick adjustment with weight compensation in the 50 mm hole pattern
            adjustable in height. Long sliding table ensure the
            continuous recording of high jacking forces .

            Fast, smooth width adjustment with ball bearing
            Carriage with central fixation in 50 mm hole pattern.

            Upper horizontal press cylinder infinitely adjustable in height and
            equipped with counterbalance .

            Lower horizontal pressing cylinders with bore for
            two abutments levels without weight compensation .

            Abutment and pressure plate depth 100 mm

            Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders
            d = 60 mm, stroke 120 mm, single-acting, with counterbalance and
            One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm
            stroke,
            120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves ,
            Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550
            4200 kg compression force vertically. With 3 kW three-phase motor for 400
            volts , 50 Hz
            Operating voltage.

            Complete with electrical connection .

            Painting RAL 7035 anthracite gray with light gray RAL 7016 .

            (technical details according to manufacturer - without guarantee ! )

            The detailed technical description can be found in the attached pdf file
          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Super-Video


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6121 · Frame press

          S&S - Super-Video - - neu -

          Technical details
          Working width 3500 mm︱Working height 2300 mm︱Number of cylinders 4 St.︱
            Working width 3500 mm
            Working height 2300 mm
            Number of cylinders 4 St.
          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria L 2000 -Video


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6496 · Frame press

          S&S - Bavaria L 2000 -Video - - neu -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱weight 2000 kg︱Dimensions (L/W/H) 5550x1300x3000 mm︱
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            weight 2000 kg
            Dimensions (L/W/H) 5550x1300x3000 mm
          Datasheet
          Request / Contact
          used Window production: wood Frame press SCHAFBERGER+SPROEDHUBER Super Junior Video


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2584 · Frame press

          SCHAFBERGER+SPROEDHUBER - Super Junior Video - - gebraucht -

          Technical details
          Working width 3000 mm︱Working height 2000 mm︱Number of cylinders 5 St.︱weight 2500 kg︱loading dimensions L x W x H 4400x1260x3120 mm︱
          # 2584 Schafberger and Sprödhuber Super Junior frame press machine .................................................. ................ Technical data summary Please inquire about any additional accessories included) .................................................. ......... Equipped with 3 movable press corners, which are covered with plastic supports are. With 4 holding cylinders to fix the wood. With electrical Manual control as well as complete with motor protection and control protection switch. Pressure force per cylinder: 2000 kg 3 vertical printing cylinders 2 horizontal printing cylinders Three-phase motor: 3 kW, 380 volts General .................................................. ............... > Working width: 3000 mm > Working height: 2000 mm > Total power requirement: 3 kW > Loading dimensions: 4400 x 1260 x 3120 mm > Machine weight, approx .: 2,500 kg Features: .................................................. ................ > hydraulic: yes > Number of vertical press cylinders: 3 > Number of press cylinders, horizontal: 2 > Vertical adjustment: electrical > Horizontal adjustment type: electrical Other features .................................................. ............... > Medium pressure beam > Opto-electronics, i.e. fully automatic Measurement and adjustment, vertical > Opto-electronics, i.e. fully automatic Measurement and adjustment, horizontal The technical characteristics of this machine should match your ideas do not match, please contact us. Our A team with many years of experience will be happy to assist you with any adjustments or when looking for a machine that meets your requirements! Video from archive. techn. Information according to the manufacturer - without guarantee!
            Working width 3000 mm
            Working height 2000 mm
            Number of cylinders 5 St.
            weight 2500 kg
            loading dimensions L x W x H 4400x1260x3120 mm
            Description :
            # 2584 Schafberger and Sprödhuber Super Junior frame press machine
            .................................................. ................

            Technical data summary
            Please inquire about any additional accessories included)
            .................................................. .........

            Equipped with 3 movable press corners, which are covered with plastic supports
            are. With 4 holding cylinders to fix the wood. With electrical
            Manual control as well as complete with motor protection and control protection
            switch.

            Pressure force per cylinder: 2000 kg
            3 vertical printing cylinders
            2 horizontal printing cylinders
            Three-phase motor: 3 kW, 380 volts

            General
            .................................................. ...............
            > Working width: 3000 mm
            > Working height: 2000 mm
            > Total power requirement: 3 kW
            > Loading dimensions: 4400 x 1260 x 3120 mm
            > Machine weight, approx .: 2,500 kg

            Features:

            .................................................. ................
            > hydraulic: yes
            > Number of vertical press cylinders: 3
            > Number of press cylinders, horizontal: 2
            > Vertical adjustment: electrical
            > Horizontal adjustment type: electrical


            Other features

            .................................................. ...............

            > Medium pressure beam
            > Opto-electronics, i.e. fully automatic
            Measurement and adjustment, vertical
            > Opto-electronics, i.e. fully automatic
            Measurement and adjustment, horizontal

            The technical characteristics of this machine should match your ideas
            do not match, please contact us. Our
            A team with many years of experience will be happy to assist you with any
            adjustments
            or when looking for a machine that meets your requirements!

            Video from archive.

            techn. Information according to the manufacturer - without guarantee!
          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S Bavaria 2000 L - Video


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2590 · Frame press

          S&S - Bavaria 2000 L - Video - - 2021 Vorführpresse -

          Technical details
          Working width 4500 mm︱Working height 3000 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5600x1250x3400 mm︱Weight 3000 kg︱
          S&S frame press Bavaria 2000 L, demonstration press built in 2021 ------------------------------------------------- With automatic press cycle + manual control for corner connections tenons + slots and dowel connections / mortised tenons, can be changed via selector switch on the control cabinet. With basic equipment for the optional use of counter profiles, if wings are on loose part are turned over. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined design. Fast, smooth, manual width adjustment by means of ball-bearing trolleys, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping. Height adjustment and pressing by long stroke cylinder in one work cycle. Press corners on the right with integrated horizontal cylinders, therefore none vertical positioning of the horizontal pressure cylinder necessary. Abutment down in four positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure regulation from 20 - 120 bar, pressure gauge Control via push button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Working height adjusted, piston diameter 60 mm Pressure force per cylinder max. 2000 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1500 kg Abutment and pressure plate depth 100 mm Control cabinet on the left of the machine base, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Painting: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 3,000 mm Item 00001144 ------------------------ 1 medium pressure beam complete with pressure cylinder, Pressure hose and shut-off valve up to 3,000 mm high Item 00000471 ------------------------ Individual pressure control for medium pressure bars, Pressure regulation range up to max. 100 bar (For pressing cross mullion windows) Item 00000112 ----------------------- infinitely height adjustable cross pressure device, complete with pressure cylinder and abutment, Throttle and shut-off valve Item 00000481 ------------------------ Individual pressure control for cross pressure device Pressure regulation range up to max. 100 bar (For pressing cross mullion windows) Item 000000391 ------------------------- Shut-off valve on the 3rd vertical cylinder Item 00000391 ----------------------- Stop valve on the upper horizontal cylinder Item 00001005 ------------------------ 3 x inclined window controls for vertical cylinders Item 00000302 ----------------------- 3x pendulum pressure plate attachable for pressing up to 60 degrees Item 00000631 ----------------------- Double pendulum pressure plate for pointed windows (triangle) Item 00000113 ----------------------- 2 x extension for pendulum pressure plate for pointed windows (triangle) Item 00000057 ----------------------- Intermediate allowance for the smallest dimensions to bridge the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Item 00000100 ----------------------- Motorized width adjustment with digital display Item 00001001 ----------------------- Machine equipped for pressing of "tenons + slots" and "dowel connection" can be changed via selector switch on the control cabinet Item 00001003 ----------------------- Basic equipment for counter profiles Item 00000629 ----------------------- Electronic pressure selector For 4 different, pre-programmed pressure levels (can be changed at any time), plus one freely selectable Pressure stage directly on the control panel Item 00001002 ----------------------- 6x pressing plate depth 120 mm Item 00099000 ----------------------- all pressure plates and bearings are covered with plastic --------------------------------- Total price in the above Execution: on request! Options with additional prices: ----------------------- Item 00001004 ----------------------- Counter profiles, price jet piece: 195.00 euros Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Orignal deviate, prices net, plus VAT (domestic)
            Working width 4500 mm
            Working height 3000 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5600x1250x3400 mm
            Weight 3000 kg
            Description :
            S&S frame press Bavaria 2000 L, demonstration press built in 2021
            -------------------------------------------------
            With automatic press cycle + manual control
            for corner connections tenons + slots and dowel connections / mortised tenons,
            can be changed via selector switch on the control cabinet.
            With basic equipment for the optional use of counter profiles, if wings are on
            loose part are turned over.

            CE version
            Basic machine in the strongest frame welded construction,
            with thick-walled special hollow profiles.
            Guideways of the pressure beams for the press corners
            in a low-abrasion machined design.

            Fast, smooth, manual width adjustment
            by means of ball-bearing trolleys, fixation in 50 mm
            Hole grid, optional motorized width adjustment with
            with hydraulic clamping.

            Height adjustment and pressing by long stroke cylinder
            in one work cycle. Press corners on the right with
            integrated horizontal cylinders, therefore none
            vertical positioning of the horizontal pressure cylinder
            necessary.
            Abutment down in four positions on each
            most favorable insertion height adjustable.

            3 KW compact hydraulic system with integrated
            Control block, variable pressure regulation
            from 20 - 120 bar, pressure gauge

            Control via push button with separate control circuits
            for the vertical and horizontal press cylinders, mounted
            on a freely movable control panel.

            2 vertical press cylinders, double-acting, stroke on
            Working height adjusted, piston diameter 60 mm
            Pressure force per cylinder max. 2000 kg
            2 horizontal press cylinders, double-acting,
            80 mm stroke, piston diameter 40 mm
            Pressure force per cylinder max. 1500 kg
            Abutment and pressure plate depth 100 mm

            Control cabinet on the left of the machine base, 400 volts, 50 Hz
            Machine with ready-to-connect plug 16 A

            Painting: RAL 7035 light gray with RAL 7016 anthracite gray

            Working size: length x height = 4,500 mm x 3,000 mm

            Item 00001144
            ------------------------
            1 medium pressure beam complete with pressure cylinder,
            Pressure hose and shut-off valve up to 3,000 mm high

            Item 00000471
            ------------------------
            Individual pressure control for medium pressure bars,
            Pressure regulation range up to max. 100 bar
            (For pressing cross mullion windows)

            Item 00000112
            -----------------------
            infinitely height adjustable cross pressure device,
            complete with pressure cylinder and abutment,
            Throttle and shut-off valve

            Item 00000481
            ------------------------
            Individual pressure control for cross pressure device
            Pressure regulation range up to max. 100 bar
            (For pressing cross mullion windows)

            Item 000000391
            -------------------------
            Shut-off valve on the 3rd vertical cylinder

            Item 00000391
            -----------------------
            Stop valve on the upper horizontal cylinder

            Item 00001005
            ------------------------
            3 x inclined window controls for vertical cylinders

            Item 00000302
            -----------------------
            3x pendulum pressure plate attachable
            for pressing up to 60 degrees

            Item 00000631
            -----------------------
            Double pendulum pressure plate
            for pointed windows (triangle)

            Item 00000113
            -----------------------
            2 x extension for pendulum pressure plate
            for pointed windows (triangle)

            Item 00000057
            -----------------------
            Intermediate allowance for the smallest dimensions
            to bridge the 1st pressure bar,
            including shut-off valve on the 1st vertical cylinder

            Item 00000100
            -----------------------
            Motorized width adjustment with digital display

            Item 00001001
            -----------------------
            Machine equipped for pressing
            of "tenons + slots" and "dowel connection"
            can be changed via selector switch on the control cabinet

            Item 00001003
            -----------------------
            Basic equipment for counter profiles

            Item 00000629
            -----------------------
            Electronic pressure selector
            For 4 different, pre-programmed pressure levels
            (can be changed at any time), plus one freely selectable
            Pressure stage directly on the control panel

            Item 00001002
            -----------------------
            6x pressing plate depth 120 mm

            Item 00099000
            -----------------------
            all pressure plates and bearings are covered with plastic

            ---------------------------------
            Total price in the above Execution: on request!


            Options with additional prices:
            -----------------------

            Item 00001004
            -----------------------
            Counter profiles, price jet piece: 195.00 euros


            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Orignal deviate, prices net, plus VAT (domestic)
          Datasheet
          Request / Contact
          used Window production: wood Frame press S&S RP 2000


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6700 · Frame press

          S&S - RP 2000 - - 2021 Vorführpresse -

          Technical details
          Working width 4000 mm︱Working height 2600 mm︱Number of cylinders 6 St.︱Dimensions (L/W/H) 5300 x 1250 x 3250 mm︱
          S&S frame press type RP 2000, from our demonstration room, manufactured in 2021 ------------------------------------- C E version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure beam with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinders on special pressure bars with one-hand quick adjustment Height-adjustable with weight compensation in 50 mm hole pattern, long Sliding carriages ensure the permanent absorption of high press forces. Fast, easy-to-use width adjustment thanks to the ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder continuously adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with centering holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterbalance and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with Counterbalance; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg Pressing pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Painting: RAL 7035 light gray with RAL 7016 anthracite gray Working size: 4000 mm x 2600 mm (length x height) Space requirement: 5300 x 1250 x 3250 mm (L x W x H) Demonstration press including the following options: ------------------------------------- Article 00000374 1.00 pc Medium pressure beam with pressure cylinder double acting, weight compensation, Pressure hose and shut-off valve up to 2600 mm high Article 00000047 1.00 pc Individual pressure control for medium pressure bars, Pressure regulation range up to max. 100 bar (for pressing cross mullion windows) Article 00000038 1.00 pc Cross printing device complete with printing cylinder double acting, counterbalance, pressure hose and shut-off valve Weight compensation on the lower horizontal cylinder is not required Article 00000048 1.00 pc Individual pressure control for cross pressure device, Pressure regulation range up to max. 100 bar (for pressing cross mullion windows) Article 00000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 00000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 00000050 1.00 pc Width compensation allowance for the pressing of small frames to bridge the 1st pressure bar, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles Item 00099000 All pressure plates and abutments covered with plastic Article 00000049 1.00 pc Triangle studio window pressing device consisting of: locking device of the Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 00000063 1.00 pc Double pendulum pressure plate for pointed windows (triangle) Article 00000042 1.00 pc Machine that can be dismantled d. H. Pressure beam on pallet ------------------------------------- Total price in the above version ex warehouse in Oberkochen: On request! ------------------------------------- Further options such as other working dimensions on request! (Technical information according to the manufacturer - without guarantee! Orignal deviate, prices net, plus VAT (domestic)
            Working width 4000 mm
            Working height 2600 mm
            Number of cylinders 6 St.
            Dimensions (L/W/H) 5300 x 1250 x 3250 mm
            Description :
            S&S frame press type RP 2000, from our demonstration room, manufactured in 2021
            -------------------------------------
            C E version
            Stable frame welded construction made of thick-walled special hollow profiles,
            Sliding carriage and pressure beam with 50 mm hole pattern.
            Continuous abutment on the left for width compression, lower abutment
            in two levels.
            Vertical press cylinders on special pressure bars with one-hand quick adjustment
            Height-adjustable with weight compensation in 50 mm hole pattern, long
            Sliding carriages ensure the
            permanent absorption of high press forces.
            Fast, easy-to-use width adjustment thanks to the ball-bearing carriage
            Central locking, fixation in 50 mm hole pattern.
            Upper horizontal press cylinder continuously adjustable in height and with
            Equipped with counterbalance.
            Lower horizontal press cylinder with centering holes for the two
            Abutment levels, with weight compensation.
            Abutment and pressure plate depth 100 mm
            Printing plate and support width 130 mm
            Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d =
            50 mm, stroke 120 mm double-acting, with counterbalance and
            One-hand quick adjustment, 2 pieces
            Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with
            Counterbalance; 2 manual control valves,
            Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400
            to 2400 kg
            Pressing pressure
            vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage.
            Complete with electrical connection.
            Painting: RAL 7035 light gray with RAL 7016 anthracite gray

            Working size: 4000 mm x 2600 mm (length x height)
            Space requirement: 5300 x 1250 x 3250 mm (L x W x H)

            Demonstration press including the following options:
            -------------------------------------

            Article 00000374 1.00 pc
            Medium pressure beam with pressure cylinder
            double acting, weight compensation,
            Pressure hose and shut-off valve
            up to 2600 mm high

            Article 00000047 1.00 pc
            Individual pressure control for medium pressure bars,
            Pressure regulation range up to max. 100 bar
            (for pressing cross mullion windows)

            Article 00000038 1.00 pc
            Cross printing device complete with printing cylinder
            double acting, counterbalance, pressure hose
            and shut-off valve
            Weight compensation on the lower horizontal cylinder is not required

            Article 00000048 1.00 pc
            Individual pressure control for cross pressure device,
            Pressure regulation range up to max. 100 bar
            (for pressing cross mullion windows)

            Article 00000039 1.00 pc
            Shut-off valve on the 3rd vertical cylinder

            Article 00000039 1.00 pc
            Shut-off valve on the upper horizontal cylinder

            Article 00000050 1.00 pc
            Width compensation allowance for the pressing
            of small frames to bridge the
            1st pressure bar, including shut-off valve on the 1st vertical cylinder

            Article 00003117 1.00 pc
            Basic equipment for counter profiles

            Item 00099000
            All pressure plates and abutments
            covered with plastic

            Article 00000049 1.00 pc
            Triangle studio window pressing device
            consisting of: locking device of the
            Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates

            Article 00000063 1.00 pc
            Double pendulum pressure plate
            for pointed windows (triangle)

            Article 00000042 1.00 pc
            Machine that can be dismantled
            d. H. Pressure beam on pallet
            -------------------------------------

            Total price in the above version ex warehouse in Oberkochen: On request!

            -------------------------------------
            Further options such as other working dimensions on request!

            (Technical information according to the manufacturer - without guarantee!
            Orignal deviate, prices net, plus VAT (domestic)
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Hydro 1


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6701 · Frame press

          HESS - Hydro 1 - - -

          Technical details
          Working width 3550 mm︱Working height 2550 mm︱Number of cylinders 5 St.︱
          - electro-hydraulic - with 5 pressure cylinders, 150 mm cylinder stroke, - 2100 kp (21000 N), - pressure force per cylinder at 160 bar, - Vertical pressure cylinder adjustable to a convenient working height, - Fixation by rows of holes, - Hydraulic working pump with 160 bar pressure output and safety circuit, integrated control block with the switch positions "Press - Stop - Release" and automatic final pressure switch-off and subsequent switching, anodized measuring scales, 100 mm supports and pressure plate depth, 50 mm grid, weight compensation for horizontal pressure cylinders as standard. Connection values: Electrical connection 1.1 kW, 380 volts, 3 / N 50 Hz. Pneumatic connection: R 3/8 ", max. 6 bar Working area: 3550 mm width, 2550 mm height 1 medium pressure bar 2550 mm high with ball-bearing carriage, pressure cylinder and abutment, adjustable in 50 mm increments, pressure hose, shut-off valve or quick-action coupling (Technical information is given by the manufacturer, without guarantee!)
            Working width 3550 mm
            Working height 2550 mm
            Number of cylinders 5 St.
            Description :
            - electro-hydraulic
            - with 5 pressure cylinders, 150 mm cylinder stroke,
            - 2100 kp (21000 N),
            - pressure force per cylinder at 160 bar,
            - Vertical pressure cylinder adjustable to a convenient working height,
            - Fixation by rows of holes,
            - Hydraulic working pump with 160 bar pressure output and safety circuit,
            integrated control block with the switch positions "Press - Stop - Release" and
            automatic final pressure switch-off and subsequent switching, anodized
            measuring scales, 100 mm supports and pressure plate depth, 50 mm grid, weight
            compensation for horizontal pressure cylinders as standard.

            Connection values: Electrical connection 1.1 kW, 380 volts, 3 / N 50 Hz.
            Pneumatic connection: R 3/8 ", max. 6 bar

            Working area: 3550 mm width, 2550 mm height

            1 medium pressure bar 2550 mm high with ball-bearing carriage, pressure
            cylinder and abutment, adjustable in 50 mm increments, pressure hose, shut-off
            valve or quick-action coupling


            (Technical information is given by the manufacturer, without guarantee!)
          2.000 €
          Datasheet
          Request / Contact
          used Window production: wood Frame press HESS Speedy


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2594 · Frame press

          HESS - Speedy - - -

          Technical details
          Working width 3500 mm︱Working height 2550 mm︱Number of cylinders 6 St.︱loading dimensions L x W x H 4500 x 950 x 2900 mm︱weight 1650 kg︱
          1 HESS frame press model Speedy --------------------------------------- Machine is currently being checked 3550 mm working width 2250 mm working height Frame press with the completely new and different frame press principle. A frame press based on the latest findings in terms of functionality, Speed ??of adjustment and work cycles, ergonomics, design, Price-performance ratio. A press that minimizes set-up times and creates the fastest possible work cycles: Dimension adjustment and pressing take place at the same time in one operation. The summarized press corners are inevitably always in the correct one Position so that manual measurement adjustments are hardly necessary. The set-up times are almost zero and the production output increases. Basic equipment / technical data: Long-term precision thanks to heavy frame welded / screwed construction with planed guideways. Rigid box profiles form the basis for easy adjustment of the multiple ball bearing press and Adjustment elements for width and height. Supply and operating elements and horizontal press cylinder in the left compact frame part ergonomic summarized. Ergonomically designed sliding carriage with continuous abutment, Easily slidable to adjust the width. Double locking in proven HESS 50 mm hole grid system. Automatic height adjustment and simultaneous pressing by Long stroke cylinder in one work cycle. Comfortable insertion height through Abutment in 3 positions. Summarized press corners, with it There is also no need to adjust the dimensions of the horizontal press cylinders. Hydraulic supply system and electrical control in the machine frame integrated, therefore no disruptive supply lines in the work area and laid in a protected place. Hydraulic supply system with 30 ... max. 160 bar pressure output, large Oil tank, built-in safety switch, final pressure release and Downstream and solenoid control valves. Direct access to Press force setting and clearly arranged press force diagram. Control of the pressing process in touch button operation. 2 vertical cylinders 1225 mm stroke, 20000 N pressing force per cylinder, 2 horizontal cylinders 80 mm stroke, 12500 N pressing force per cylinder. Smallest dimension without medium pressure bar horizontal 380 mm vertical 320 mm Smallest size with 1 medium pressure beam horizontal 580 mm vertical 320 mm With an additional horizontal printing cylinder, the smallest vertical dimensions are 100 mm larger. Electrical equipment according to VDE. Electrical connection: 3 KW, 400 V, 50 Hz. Painting: RAL 7030 stone gray with RAL 1018 zinc yellow 1 medium pressure beam 2550 mm high with ball-bearing carriage, press cylinder and abutment, Abutment adjustable in 3 insertion heights, locking for Gluing angled window, pressure hose, shut-off valve 1 additional horizontal pressure cylinder, Pressure hose, shut-off valve and quick release coupling. 1 control for angled window gluing 1 pressure plate extension, attachable 1 single pressure control for horizontal cylinders (technical information according to the manufacturer - without guarantee!)
            Working width 3500 mm
            Working height 2550 mm
            Number of cylinders 6 St.
            loading dimensions L x W x H 4500 x 950 x 2900 mm
            weight 1650 kg
            Description :
            1 HESS frame press model Speedy
            ---------------------------------------
            Machine is currently being checked

            3550 mm working width
            2250 mm working height

            Frame press with the completely new and different frame press principle.
            A frame press based on the latest findings in terms of functionality,
            Speed ??of adjustment and work cycles, ergonomics, design,
            Price-performance ratio.

            A press that minimizes set-up times and creates the fastest possible work
            cycles:
            Dimension adjustment and pressing take place at the same time in one operation.
            The
            summarized press corners are inevitably always in the correct one
            Position so that manual measurement adjustments are hardly necessary.
            The set-up times are almost zero and the production output increases.

            Basic equipment / technical data:

            Long-term precision thanks to heavy frame welded / screwed construction with
            planed guideways. Rigid box profiles form the basis for
            easy adjustment of the multiple ball bearing press and
            Adjustment elements for width and height. Supply and operating elements and
            horizontal press cylinder in the left compact frame part ergonomic
            summarized.

            Ergonomically designed sliding carriage with continuous abutment,
            Easily slidable to adjust the width. Double locking in
            proven HESS 50 mm hole grid system.

            Automatic height adjustment and simultaneous pressing by
            Long stroke cylinder in one work cycle. Comfortable insertion height through
            Abutment in 3 positions. Summarized press corners, with it
            There is also no need to adjust the dimensions of the horizontal press
            cylinders.

            Hydraulic supply system and electrical control in the machine frame
            integrated, therefore no disruptive supply lines in the work area
            and laid in a protected place.

            Hydraulic supply system with 30 ... max. 160 bar pressure output, large
            Oil tank, built-in safety switch, final pressure release and
            Downstream and solenoid control valves. Direct access to
            Press force setting and clearly arranged press force diagram.
            Control of the pressing process in touch button operation.

            2 vertical cylinders 1225 mm stroke, 20000 N pressing force per cylinder,
            2 horizontal cylinders 80 mm stroke, 12500 N pressing force per cylinder.

            Smallest dimension without medium pressure bar
            horizontal 380 mm
            vertical 320 mm

            Smallest size with 1 medium pressure beam
            horizontal 580 mm
            vertical 320 mm

            With an additional horizontal printing cylinder, the smallest vertical
            dimensions are 100 mm larger.

            Electrical equipment according to VDE.
            Electrical connection: 3 KW, 400 V, 50 Hz.

            Painting:

            RAL 7030 stone gray with
            RAL 1018 zinc yellow

            1 medium pressure beam 2550 mm high
            with ball-bearing carriage, press cylinder and abutment,
            Abutment adjustable in 3 insertion heights, locking for
            Gluing angled window, pressure hose, shut-off valve

            1 additional horizontal pressure cylinder,
            Pressure hose, shut-off valve and quick release coupling.

            1 control for angled window gluing

            1 pressure plate extension, attachable

            1 single pressure control for horizontal cylinders

            (technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •