Європейська мережа дилерів акціонерної техніки

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:

          Sanding machine

          Machinelist: Sanding machine


          Sanding machine

          used Window production: wood Sanding machine MB Roba Twin Flat  -Video-


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5343 · Sanding machine

          MB - Roba Twin Flat -Video- - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 100,150 mm︱Sanding height max. ,
            Number of sanding units 2 St.
            sanding width 100,150 mm
            Sanding height max. ,


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD QL 4-8


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5452 · Sanding machine

          QUICKWOOD - QL 4-8 - - neu -

          Technical details
          Number of sanding units 8 St.︱sanding width 300 mm︱Sanding height max. 100 mm︱
          Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine ------------------------------------------------------------------------------------------------------------- Maschine zur Längsholzbearbeitung - Lose Fasern werden von der Oberfläche entfernt - Erhebliche Reduzierung der Faserbildung nach der Grundierung - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur - Bessere Tiefenwirkung im Holz - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz - Stufenlose Einstellungen aller Geschwindigkeiten - Leichter Werkzeugwechsel durch abnehmbare Spindeln - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung - Optionale PLC-Steuerung vorgesehen Einsatzmöglichkeiten - Fensterflügel- und - Rahmeneinzelteile - Glasleisten - Profilbretter - Kranzprofile - Verkleidungen - Profilierte Leisten Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 8 St.
            sanding width 300 mm
            Sanding height max. 100 mm
            Description :
            Quickwood QL automatische Holzfinish- und Lackzwischenschliffmaschine
            -------------------------------------------------------------------------------------------------------------

            Maschine zur Längsholzbearbeitung
            - Lose Fasern werden von der Oberfläche entfernt
            - Erhebliche Reduzierung der Faserbildung nach der Grundierung
            - Gleichmäßige Aufnahme des Lackes bzw. Beize oder Lasur
            - Bessere Tiefenwirkung im Holz
            - Der Lackzwischenschliff wird erheblich reduziert oder entfällt ganz
            - Stufenlose Einstellungen aller Geschwindigkeiten
            - Leichter Werkzeugwechsel durch abnehmbare Spindeln
            - Die Bearbeitung erfolgt vierseitig mit jeweils 2 Spindeln auf einer Schleifseite
            - Lieferbar auch mit weniger Schleifaggregate je nach Anwendung
            - Optionale PLC-Steuerung vorgesehen

            Einsatzmöglichkeiten
            - Fensterflügel- und
            - Rahmeneinzelteile
            - Glasleisten
            - Profilbretter
            - Kranzprofile
            - Verkleidungen
            - Profilierte Leisten

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine QUICKWOOD ROV 2600


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5453 · Sanding machine

          QUICKWOOD - ROV 2600 - - neu -

          Technical details
          Number of sanding units 32 St.︱sanding width 2600 mm︱Sanding height max. 150 mm︱
          Quckwood ROV 2600 vertikale Zwischenschliffmaschine ------------------------------------------------------------------------------- Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren, Möbelteilen am Hängeförderer. - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite. - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine. - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen. - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine. - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften. - Hohe Werkzeugstandzeit. Angebot auf Anfrage! Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF! (techn. Angaben laut Hersteller - ohne Gewähr!)
            Number of sanding units 32 St.
            sanding width 2600 mm
            Sanding height max. 150 mm
            Description :
            Quckwood ROV 2600 vertikale Zwischenschliffmaschine
            -------------------------------------------------------------------------------

            Beidseitiger Lackzwischenschliff von Fensterrahmen, Fensterflügeln und flachen profilierten Haustüren,
            Möbelteilen am Hängeförderer.

            - Ruhige Schleifwirkung auf der Oberfläche durch Einsatz von 16 Spindeln pro Schleifseite.
            - Klemmvorschub für den sicheren Transport der Werkstücke durch die Maschine.
            - Zentrale Steuerung mit Übernahme- und Übergabeschnittstellen zu anderen Maschinen.
            - Bürstenplatten für die Stabilisierung der Werkstücke während des Durchlaufs in der Maschine.
            - Geringerer Platzbedarf durch 2 spiegelbildlich aufgestellte Maschinenhälften.
            - Hohe Werkzeugstandzeit.

            Angebot auf Anfrage!
            Ausführliche techn. Beschreibung, Bilder und Prospekte nebenstehend als PDF!
            (techn. Angaben laut Hersteller - ohne Gewähr!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ DBx2-200 Crossmaster


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5282 · Sanding machine

          LÖWER - LZ DBx2-200 Crossmaster - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 200 mm︱Sanding height max. 150 mm︱
            Number of sanding units 4 St.
            sanding width 200 mm
            Sanding height max. 150 mm


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER MiniSpin N


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6006 · Sanding machine

          LÖWER - MiniSpin N - - neu -

          Technical details
          Number of sanding units 1 st.︱sanding width 150 mm︱Sanding height max. 150 mm︱
          Loewer edge finishing machine MiniSpin N Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush <300 mm Frequency converter for stepless adjustment of the Spindle speed 200-800 rpm Table size 400 x 800 mm two directions of rotation selectable Operating voltage 110/240 V 50/60 Hz Exhaust connection D = 100 mm Weight 100 kg including grooved body D = 180, L = 150 placement with SmartFlex grinding blades CE - execution (technical details according to manufacturer - without guarantee!)
            Number of sanding units 1 st.
            sanding width 150 mm
            Sanding height max. 150 mm
            Description :
            Loewer edge finishing machine MiniSpin N

            Machines for finishing and fine sanding of
            Edges and profiles with a grinding spindle
            horizontal or vertical.

            Motor 0,75 KW

            Spindle in vertical position for machining edges

            Pivoted spindle in horizontal position, laterally
            etc. for processing longer profile bars or
            Conjunction with a combined grinding head for grinding
            of edges with a grinding disc blades

            Grinding head swiveling + / - 20 ° for editing
            oblique lines

            Working height / width 150 mm

            max. Diameter roller / brush <300 mm

            Frequency converter for stepless adjustment of the
            Spindle speed 200-800 rpm

            Table size 400 x 800 mm

            two directions of rotation selectable

            Operating voltage 110/240 V 50/60 Hz

            Exhaust connection D = 100 mm

            Weight 100 kg

            including grooved body D = 180, L = 150 placement
            with SmartFlex grinding blades

            CE - execution

            (technical details according to manufacturer - without guarantee!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ 6


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5076 · Sanding machine

          LÖWER - LZ 6 - - neu -

          Technical details
          Number of sanding units 6 St.︱sanding width 150 mm︱Sanding height max. 120 mm︱Condition: new / unused
          LÖWER Finish and intermediate grinding machine Leistomat LZ 6 For finishing (smoothing, de-fading and edge breaking) Or intermediate grinding of profiled window frames - Finish and intermediate grinding machine with six grinding- lamellar aggregates, 1 surface units at the top, 4 profile units with 1 surface units at the bottom 4 profile units with oblique arrangement on the top right, Lower right, upper left, lower left. - linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all grinding units Directly over the incoming workpiece edge to the Avoid the grounding of the primer in the Front edge area. By dipping it is It is possible to feed the units deeper into the profiles can - motorized workpiece thickness adjustment of the machine By means of motorized height adjustment via pushbutton - Display of workpiece thickness via digital display with Modern magnetic tape system - variable grinding lamella speed via frequency inverter For adjusting the grinding intensity to different primers - workpiece width detection at the machine inlet with Automatic adjustment of the lateral grinding units To the current workpiece width - fast profile selection by means of a selector button at the Machine inlet side as well as automatic adjustment of the Grinding lamellas on the selected profile - modern PLC control for easy operation of the machine - Suction connection: 4 x100mm - Length (housing) x Width x Height (mm): 2100x1510x1550 Length complete: 3100mm (including roller track with Integrated workpiece width detection) - Weight: 750 kg - Operating voltage 400 V, 50 Hz, 3P, air connection 6 bar - CE version Machine price including grinding discs Optional accessories: One set of SmartFlex sanding discs for Leistomat LZ 6 consisting of Area aggregates: 24 Strips M55 / 150-7 24 Strips M55 / 150-20 folding units: 48 Strips M55 / 75-4 48 Strips M55 / 75-7 Price on request! (Technical data according to manufacturer without warranty!)
            Number of sanding units 6 St.
            sanding width 150 mm
            Sanding height max. 120 mm
            Description :
            LÖWER Finish and intermediate grinding machine Leistomat LZ 6

            For finishing (smoothing, de-fading and edge breaking)
            Or intermediate grinding of profiled window frames
            - Finish and intermediate grinding machine with six grinding-
            lamellar aggregates,
            1 surface units at the top, 4 profile units with
            1 surface units at the bottom
            4 profile units with oblique arrangement on the top right,
            Lower right, upper left, lower left.
            - linear guidance of all grinding units
            Linear ball bearing sets on hardened shafts
            - time-controlled immersion of all grinding units
            Directly over the incoming workpiece edge to the
            Avoid the grounding of the primer in the
            Front edge area. By dipping it is
            It is possible to feed the units deeper into the profiles
            can
            - motorized workpiece thickness adjustment of the machine
            By means of motorized height adjustment via pushbutton
            - Display of workpiece thickness via digital display with
            Modern magnetic tape system
            - variable grinding lamella speed via frequency inverter
            For adjusting the grinding intensity to different
            primers
            - workpiece width detection at the machine inlet with
            Automatic adjustment of the lateral grinding units
            To the current workpiece width
            - fast profile selection by means of a selector button at the
            Machine inlet side as well as automatic adjustment of the
            Grinding lamellas on the selected profile
            - modern PLC control for easy operation of the machine
            - Suction connection: 4 x100mm
            - Length (housing) x Width x Height (mm): 2100x1510x1550
            Length complete: 3100mm (including roller track with
            Integrated workpiece width detection)
            - Weight: 750 kg
            - Operating voltage 400 V, 50 Hz, 3P, air connection 6 bar
            - CE version
            Machine price including grinding discs

            Optional accessories:

            One set of SmartFlex sanding discs for Leistomat LZ 6
            consisting of

            Area aggregates:
            24 Strips M55 / 150-7
            24 Strips M55 / 150-20

            folding units:
            48 Strips M55 / 75-4
            48 Strips M55 / 75-7

            Price on request!

            (Technical data according to manufacturer without warranty!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 3000


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6155 · Sanding machine

          LÖWER - DSM 3000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 290 mm︱Sanding height max. 180 mm︱
            Number of sanding units 2 St.
            sanding width 290 mm
            Sanding height max. 180 mm


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2000


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5580 · Sanding machine

          LÖWER - DSM 2000 - - neu -

          Technical details
          Number of sanding units 2 St.︱sanding width 190 mm︱Sanding height max. 2-180 mm︱
          LÖWER-Doppelseitige Schleifmaschine DSM 2000 Doppelseitige Einzelholzschleifmaschine zum Schleifen von Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus- führung mit langen Gußtischen, Bürst- und Finisheinrichtung und Transportbandvorschub. Geeignet für hohe Dauerbelastung auch bei höheren Spanabnahmen. - versetzt angeordnete Schleif- und Finishaggregate oben und unten - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig ebener Eingriffszone - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr guter Wärmeleitfähigkeit und absoluter Maßhaltigkeit - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere Schleifbandstandzeiten - zwangsgeführte pneumatisch gesteuerte Schleifbandoszillation - effektive Schleifstaubabsaugung direkt an den Schleifwalzen Flugstaubabsaugung an den Spannrollen - integrierte Bürst- und Finisheinrichtung mit großer Schleifstaubabsaugung - motorische Schleifdickeneinstellung über Präzisionsgewindespindeln und großdimensionierten Linear- Kugel- lagersets auf gehärteten und geschliffenen Präzisions- wellen mit Staub- und Schmutzsicherung - Einstellung der Spanabnahme unten über Präzisionsgewindespindel mit Maßanzeige über Skalenring (Auflösung 0,1mm) - Schleifbandspannung über Pneumatikzylinder mit konstantem Spanndruck - Schleifbandwechsel mit pneumatischer Bandentspannung in Sekundenschnelle - Einstellmöglichkeit des Schleifbandlaufes bei Bandwechsel - elektropneumatische Druckluftüberwachung - Einlaufsicherung über Kontaktrolle bei zu dicken Werkstücken - Werkstücktransport über kalibrierte rutsch- und haftfeste Transportbänder über schwere, 1000mm lange Gußtische mit feinstgehobelter Oberfläche und gefederten Andruckrollen mit Feineinstellung - Kardanwellenantrieb für ruckfreien und gleichmäßigen Werkstücktransport - Vorschubgetriebemotor mit drei unterschiedlichen Vorchubgeschwindigkeiten zur schnellen Anpassung an verschiedene Holzarten - alle Motoren ekektrisch abgesichert - ergonomisch angeordnete Bedienelemente an der Werkstückeinlaufseite - automatische Werkstückstärkenabtastung (kein vorheriges Messen notwendig) - digitale Stärkenanzeige (Auflösung 0,1mm) mit modernem Magnetbandsystem Technische Daten: - Schleifbandgeschwindigkeit: 22 m/s - Schleifbandlänge: 1800mm - Schleifbandbreite:200mm - Arbeitsbreite: 190mm - Schleifdicke: 2-180mm - zwei Bremsmotoren für Antrieb: 5,5 kW - Vorschubmotor: 1,0 kW - Vorschubgeschwindigkeit: 6, 11 und 16 m/min. - automatische Höhenverstellung: 0,37 kW - zwei Bürstenaggregate mit Fibrebürsten D 120 x 200mm à 0,37 kW - Absaugstutzen: 2 x 120mm und 2 x 150mm - Pneumatikanschluß 6 bar - Arbeitshöhe: 850mm - Länge: 2105mm - Länge mit Bedienteil 2490mm - Breite: 880mm - Höhe: 1910mm - Gewicht: ca. 1500 kg - Betriebsspannung: 400 Volt, 50 Hz, 3P - CE-Ausführung ------------------------------------------------------------------------- Grundpreis der Maschine auf Anfrage! ------------------------------------------------------------------------- Sonderzubehör: stufenloser Vorschub 4-20 m/min. zur Geschwindigkeitsanpassung an Vormaschine Preis netto in Euro: 1.150,00 Werkstückabblasung - mittels Düsen von oben und unten am Maschinenauslauf angeordnet, pneumatisch gesteuert Preis netto in Euro: 600,00 Schleifbandausblasung - über Düsen direkt an den Radien der Spannrollen innerhalb der Absaugung angeordnet, separat zuschaltbar Preis netto in Euro: 540,00 Querverschiebung der kompletten Maschine - einstellbar 50-100mm oszillierend zur gleichmäßigeren Ausnutzung von Schleifbändern, Finishwerkzeugen und Transportsystem, Getriebemotor 0,37kW (nicht verfügbar in Verbindung mit Disc/Softdisc Aggregat) Preis netto in Euro: 3.670,00 Transportfreilauf-Einrichtung - bei Verkettung mit wenig Abstand zur Vormaschine Preis netto in Euro: 730,00 Externer Startimpuls der Maschine - über einen Taster inkl. Ansteuermöglichkeit über externe SPS-Steuerung (bei Verkettung in Fertigungsstraße) Preis netto in Euro: 680,00 DUPLO-Steuerung - zusätzliches Bedienteil zur Anbringung an eine vorgeschaltete Maschine mit folgenden Funktionen: - Starttaster - Not-Aus - Höhenverstellung Auf, Ab und 1/10 Ab - Digitale Stärkenanzeige - geschirmtes Spezialkabel, (max. 20m) Preis netto in Euro: 2.990,00 (technische Angaben laut Hersteller - ohe Gewähr!) Alle angegebenen Preis netto. zzgl. gesetzl. Mwst.
            Number of sanding units 2 St.
            sanding width 190 mm
            Sanding height max. 2-180 mm
            Description :
            LÖWER-Doppelseitige Schleifmaschine DSM 2000
            Doppelseitige Einzelholzschleifmaschine zum Schleifen von
            Massivholz wie z.B. Fensterhölzern etc. Stabile Top-Aus-
            führung mit langen Gußtischen, Bürst- und Finisheinrichtung
            und Transportbandvorschub. Geeignet für hohe Dauerbelastung
            auch bei höheren Spanabnahmen.

            - versetzt angeordnete Schleif- und Finishaggregate oben und unten
            - direkt angetriebene gummierte Schleifrollen für schlupffreie Kraftübertragung
            - Kombischliff über Rolle und Schuh für hohe Spanabnahmen bei gleichzeitig
            ebener Eingriffszone
            - wartungs- und verschleißfreie CERMET-beschichtete Schleifschuhe mit sehr
            guter Wärmeleitfähigkeit und absoluter
            Maßhaltigkeit
            - Fremdkühlung der Schleifzonen für einen kühleren Schliff und höhere
            Schleifbandstandzeiten
            - zwangsgeführte pneumatisch gesteuerte Schleifbandoszillation
            - effektive Schleifstaubabsaugung direkt an den Schleifwalzen
            Flugstaubabsaugung an den Spannrollen
            - integrierte Bürst- und Finisheinrichtung mit großer Schleifstaubabsaugung
            - motorische Schleifdickeneinstellung über Präzisionsgewindespindeln und
            großdimensionierten Linear- Kugel-
            lagersets auf gehärteten und geschliffenen Präzisions-
            wellen mit Staub- und Schmutzsicherung
            - Einstellung der Spanabnahme unten über Präzisionsgewindespindel mit
            Maßanzeige über Skalenring (Auflösung 0,1mm)
            - Schleifbandspannung über Pneumatikzylinder mit konstantem Spanndruck
            - Schleifbandwechsel mit pneumatischer Bandentspannung in Sekundenschnelle
            - Einstellmöglichkeit des Schleifbandlaufes bei Bandwechsel
            - elektropneumatische Druckluftüberwachung
            - Einlaufsicherung über Kontaktrolle bei zu dicken Werkstücken
            - Werkstücktransport über kalibrierte rutsch- und haftfeste Transportbänder
            über schwere, 1000mm lange Gußtische mit feinstgehobelter Oberfläche und
            gefederten Andruckrollen mit Feineinstellung
            - Kardanwellenantrieb für ruckfreien und gleichmäßigen Werkstücktransport
            - Vorschubgetriebemotor mit drei unterschiedlichen Vorchubgeschwindigkeiten zur
            schnellen Anpassung an verschiedene Holzarten
            - alle Motoren ekektrisch abgesichert
            - ergonomisch angeordnete Bedienelemente an der Werkstückeinlaufseite
            - automatische Werkstückstärkenabtastung (kein vorheriges Messen notwendig)
            - digitale Stärkenanzeige (Auflösung 0,1mm) mit modernem Magnetbandsystem

            Technische Daten:
            - Schleifbandgeschwindigkeit: 22 m/s
            - Schleifbandlänge: 1800mm
            - Schleifbandbreite:200mm
            - Arbeitsbreite: 190mm
            - Schleifdicke: 2-180mm
            - zwei Bremsmotoren für Antrieb: 5,5 kW
            - Vorschubmotor: 1,0 kW
            - Vorschubgeschwindigkeit: 6, 11 und 16 m/min.
            - automatische Höhenverstellung: 0,37 kW
            - zwei Bürstenaggregate
            mit Fibrebürsten D 120 x 200mm à 0,37 kW
            - Absaugstutzen: 2 x 120mm und 2 x 150mm
            - Pneumatikanschluß 6 bar
            - Arbeitshöhe: 850mm
            - Länge: 2105mm
            - Länge mit Bedienteil 2490mm
            - Breite: 880mm
            - Höhe: 1910mm
            - Gewicht: ca. 1500 kg
            - Betriebsspannung: 400 Volt, 50 Hz, 3P
            - CE-Ausführung
            -------------------------------------------------------------------------
            Grundpreis der Maschine auf Anfrage!
            -------------------------------------------------------------------------


            Sonderzubehör:

            stufenloser Vorschub 4-20 m/min.
            zur Geschwindigkeitsanpassung an Vormaschine
            Preis netto in Euro: 1.150,00

            Werkstückabblasung
            - mittels Düsen von oben und unten am Maschinenauslauf
            angeordnet, pneumatisch gesteuert
            Preis netto in Euro: 600,00

            Schleifbandausblasung
            - über Düsen direkt an den Radien der Spannrollen innerhalb
            der Absaugung angeordnet, separat zuschaltbar
            Preis netto in Euro: 540,00

            Querverschiebung der kompletten Maschine
            - einstellbar 50-100mm oszillierend zur gleichmäßigeren
            Ausnutzung von Schleifbändern, Finishwerkzeugen und
            Transportsystem, Getriebemotor 0,37kW
            (nicht verfügbar in Verbindung mit Disc/Softdisc Aggregat)
            Preis netto in Euro: 3.670,00

            Transportfreilauf-Einrichtung
            - bei Verkettung mit wenig Abstand zur Vormaschine
            Preis netto in Euro: 730,00

            Externer Startimpuls der Maschine
            - über einen Taster inkl. Ansteuermöglichkeit über externe
            SPS-Steuerung (bei Verkettung in Fertigungsstraße)
            Preis netto in Euro: 680,00

            DUPLO-Steuerung
            - zusätzliches Bedienteil zur Anbringung an eine
            vorgeschaltete Maschine mit folgenden Funktionen:
            - Starttaster
            - Not-Aus
            - Höhenverstellung Auf, Ab und 1/10 Ab
            - Digitale Stärkenanzeige
            - geschirmtes Spezialkabel, (max. 20m)
            Preis netto in Euro: 2.990,00


            (technische Angaben laut Hersteller - ohe Gewähr!)
            Alle angegebenen Preis netto. zzgl. gesetzl. Mwst.


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER FA 6 D Finishautomat


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5849 · Sanding machine

          LÖWER - FA 6 D Finishautomat - - neu -

          Technical details
          Number of sanding units 6 St.︱sanding width 2980 mm︱Sanding height max. 110 mm︱
            Number of sanding units 6 St.
            sanding width 2980 mm
            Sanding height max. 110 mm


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DSM 2004


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5088 · Sanding machine

          LÖWER - DSM 2004 - - neu -

          Technical details
          Number of sanding units 4 St.︱sanding width 200 mm︱Sanding height max. 180 mm︱
            Number of sanding units 4 St.
            sanding width 200 mm
            Sanding height max. 180 mm


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER DoubleMaster DSM 2000


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6199 · Sanding machine

          LÖWER - DoubleMaster DSM 2000 - - neu -

          Technical details
          Number of sanding units 2 St︱sanding width 190 mm︱Sanding height max. 2 - 180 mm︱
            Number of sanding units 2 St
            sanding width 190 mm
            Sanding height max. 2 - 180 mm


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER HBS 402


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6246 · Sanding machine

          LÖWER - HBS 402 - - neu -

          Technical details
          Number of sanding units 2 st.︱sanding width 390 mm︱Sanding height max. 390 mm︱
            Number of sanding units 2 st.
            sanding width 390 mm
            Sanding height max. 390 mm


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER Leistomat SD Video


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6368 · Sanding machine

          LÖWER - Leistomat SD Video - - neu -

          Technical details
          Number of sanding units 8 st.︱sanding width 180 (260) mm︱Sanding height max. 160 mm︱Dimensions (L/W/H) 3065x1600x1900 mm︱weight of the machine ca. 1300 kg︱
          Window single wood intermediate sanding machine Löwer LeistoMat SD with touch panel control for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding of profiled window latches - 2 lateral lamellar roller aggregates each 0.75kW, L=120mm 1 disc unit Ø=200mm above 0.75 kW 1 slat roller unit L=200mm above 0.75kW 1 disc unit Ø=200mm below 0.75kW 1 slat roller unit L=200mm below 0.75kW, 2 lateral lamellar roller aggregates each 0.75kW, L=120mm - Linear guidance of all grinding units via linear ball bearing sets hardened shafts - Time-controlled immersion of all lamellar roller units directly above the incoming workpiece edges. By immersing it is possible to be able to move the aggregates deeper into the profiles. - Motorized workpiece thickness adjustment of the machine - Variable grinding flap speed via frequency converter for adjustment the sanding intensity to different primers Frequency converters (separate for discs, surface rollers and side rollers) - Disc units as a soft disc with Velcro for grinding discs (wood grinding) - Feed via three lower and one upper conveyor belt and spring-loaded Pressure rollers with stepless speed 5-15m/min - Parameters that can be set via touch panel are workpiece thickness, workpiece width (left side units individually), immersion depth side units, spindle speed, feed rate - Storage of parameters as machine programs in program mode - Working in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of the sanding units on the workpiece width and the profile shape (workpiece height is determined in advance set) - Indicator lights red/green to indicate operational readiness - shortest workpiece length 380mm - Conveyor belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - max workpiece height 160mm - Suction connection 4 x 100mm and 2x 80mm diameter - Length (housing) x width x height (mm): 3065 x 1600 x 1900, Length complete: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Option: -Disc Alu D 200/30 with 30 grooves 50 mm O-ring for holding SmartFlex abrasive flaps -Set of grinding flaps for Leistomat SD disc only consisting of surface aggregates: 60 strip M 35/50 -Sandpaper disc Ø200 mm K 280 for soft disc D=200 mm grit 280 with velor backing (velcro) (Technical description according to the manufacturer - without guarantee!)
            Number of sanding units 8 st.
            sanding width 180 (260) mm
            Sanding height max. 160 mm
            Dimensions (L/W/H) 3065x1600x1900 mm
            weight of the machine ca. 1300 kg
            Description :
            Window single wood intermediate sanding machine Löwer LeistoMat SD

            with touch panel control for finish sanding (smoothing, defibering and
            edge breaking) or intermediate sanding of profiled window latches

            - 2 lateral lamellar roller aggregates each 0.75kW, L=120mm
            1 disc unit Ø=200mm above 0.75 kW
            1 slat roller unit L=200mm above 0.75kW
            1 disc unit Ø=200mm below 0.75kW
            1 slat roller unit L=200mm below 0.75kW,
            2 lateral lamellar roller aggregates each 0.75kW, L=120mm

            - Linear guidance of all grinding units via linear ball bearing sets
            hardened shafts
            - Time-controlled immersion of all lamellar roller units directly above
            the incoming workpiece edges. By immersing it is possible
            to be able to move the aggregates deeper into the profiles.
            - Motorized workpiece thickness adjustment of the machine
            - Variable grinding flap speed via frequency converter for adjustment
            the sanding intensity to different primers
            Frequency converters (separate for discs, surface rollers and side rollers)
            - Disc units as a soft disc with Velcro for grinding discs (wood grinding)
            - Feed via three lower and one upper conveyor belt and spring-loaded
            Pressure rollers with stepless speed 5-15m/min
            - Parameters that can be set via touch panel are workpiece thickness, workpiece
            width
            (left side units individually), immersion depth side units,
            spindle speed, feed rate
            - Storage of parameters as machine programs in program mode
            - Working in automatic mode with non-contact workpiece width detection
            and profile recognition as well as automatic adjustment of the sanding units
            on the workpiece width and the profile shape (workpiece height is determined
            in advance
            set)
            - Indicator lights red/green to indicate operational readiness
            - shortest workpiece length 380mm
            - Conveyor belt width 200mm
            - max. workpiece width 180mm (260mm in the envelope process)
            - max workpiece height 160mm
            - Suction connection 4 x 100mm and 2x 80mm diameter
            - Length (housing) x width x height (mm): 3065 x 1600 x 1900,
            Length complete: 4365mm (including roller conveyor with integrated
            workpiece width detection)
            - Weight: 1500kg
            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar
            - CE version

            Option:

            -Disc Alu D 200/30 with 30 grooves 50 mm O-ring
            for holding SmartFlex abrasive flaps

            -Set of grinding flaps for Leistomat SD disc only
            consisting of surface aggregates: 60 strip M 35/50

            -Sandpaper disc Ø200 mm K 280 for soft disc
            D=200 mm grit 280
            with velor backing (velcro)


            (Technical description according to the manufacturer - without guarantee!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine LÖWER LZ 8


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6478 · Sanding machine

          LÖWER - LZ 8 - - 2008 -

          Technical details
          Number of sanding units 8 st.︱sanding width 150 mm︱
          Machine can be inspected during production! Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 -------------------------------------------------- ------------------- for finish sanding (smoothing, defibering and edge breaking) or intermediate sanding profiled window latch - Finish and intermediate sanding machine with eight sanding blade aggregates, 2 surface units at the top (synchronism / counter-rotation) 2 surface units below (synchronism / counter-rotation) 4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating - linear guidance of all grinding units over Linear ball bearing sets on hardened shafts - Timed immersion of all in the opposite direction rotating grinding units directly above the incoming Workpiece edges to avoid looping through the Primer in the front edge area. By the It is possible to immerse the aggregates deeper in the Be able to deliver profiles. - Timed replacement of the rotating in synchronism Aggregate - motor workpiece thickness adjustment of the machine by means of motorized height adjustment via push button - Display of workpiece thickness via digital display with modern magnetic tape system - Variable grinding disc speed via frequency converter to adapt the grinding intensity to different Primers by means of frequency converters 200-1000 rpm - Workpiece width recognition at the machine infeed with automatic adjustment of the left grinding units to the current workpiece width - Profile preselection via selector switch on the machine inlet side as well as automatic adjustment of the Abrasive blade aggregates on the selected profile - modern PLC control for easy operation of the machine - Suction connection 5 x 100mm diameter - Length (body) x width x height (mm): 2600 x 1500 x 1600 Length complete: 3600mm (including roller conveyor with integrated workpiece width recognition) - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version Technical specifications: Number of sanding units: 8 pcs. Surface brush width: max. 150 mm Working height: max. 100 mm Surface Brush Motor: 0.75 kW Side brush motor: 0.37 kW Brush speed: 1380 rpm Feed motor: 1.1 kW Feed rate: 4-20 M / min Feed stepless Speed ??controller grinding units Automatic width detection Digital magnetic tape gauge Extraction nozzle: 5 x 100 mm Air requirement: 5 x 565 m3 / h Minimum air velocity at the connection of the machine: 20 m / s Dimensions: Length: 2600 mm Width: 1480 mm Height: 1700 mm Weight: 950 kg WITH inlet roller conveyor ------------------------------------- Price of the Löwer amchine on request! OPTION: return conveyor consisting of: ******************************************** Cross conveyor with lifting-lowering device consisting of: -------------------------------------------------- ------------- Longitudinal transport track driven 2200 mm Cross transport driven 1150 mm Longitudinal transport track driven 2200 mm Roller conveyor not driven back to the operator ---------------------------------- More price for back transport system: 8.500,00 Euro (Technical data according to manufacturer - without guarantee!)
            Number of sanding units 8 st.
            sanding width 150 mm
            Description :
            Machine can be inspected during production!

            Leistomat - Finisch and intermediate leveling machine Löwer LZ 8
            -------------------------------------------------- -------------------

            for finish sanding (smoothing, defibering and edge breaking)
            or intermediate sanding profiled window latch
            - Finish and intermediate sanding machine with eight sanding blade aggregates,
            2 surface units at the top (synchronism / counter-rotation)
            2 surface units below (synchronism / counter-rotation)
            4 profile units with angled arrangement top right,
            bottom right, top left, bottom left, all mating
            - linear guidance of all grinding units over
            Linear ball bearing sets on hardened shafts
            - Timed immersion of all in the opposite direction
            rotating grinding units directly above the incoming
            Workpiece edges to avoid looping through the
            Primer in the front edge area. By the
            It is possible to immerse the aggregates deeper in the
            Be able to deliver profiles.
            - Timed replacement of the rotating in synchronism
            Aggregate
            - motor workpiece thickness adjustment of the machine
            by means of motorized height adjustment via push button
            - Display of workpiece thickness via digital display with
            modern magnetic tape system
            - Variable grinding disc speed via frequency converter
            to adapt the grinding intensity to different
            Primers by means of frequency converters 200-1000 rpm
            - Workpiece width recognition at the machine infeed with
            automatic adjustment of the left grinding units
            to the current workpiece width
            - Profile preselection via selector switch on the machine inlet side
            as well as automatic adjustment of the
            Abrasive blade aggregates on the selected profile
            - modern PLC control for easy operation of the machine
            - Suction connection 5 x 100mm diameter
            - Length (body) x width x height (mm): 2600 x 1500 x 1600
            Length complete: 3600mm (including roller conveyor with
            integrated workpiece width recognition)
            - Operating voltage 400V, 50Hz, 3P, air connection 6 bar
            - CE version


            Technical specifications:

            Number of sanding units: 8 pcs.

            Surface brush width: max. 150 mm
            Working height: max. 100 mm
            Surface Brush Motor: 0.75 kW
            Side brush motor: 0.37 kW
            Brush speed: 1380 rpm
            Feed motor: 1.1 kW
            Feed rate: 4-20 M / min
            Feed stepless

            Speed ??controller grinding units
            Automatic width detection
            Digital magnetic tape gauge

            Extraction nozzle: 5 x 100 mm
            Air requirement: 5 x 565 m3 / h
            Minimum air velocity at the connection of the machine: 20 m / s

            Dimensions:
            Length: 2600 mm
            Width: 1480 mm
            Height: 1700 mm

            Weight: 950 kg

            WITH inlet roller conveyor
            -------------------------------------
            Price of the Löwer amchine on request!

            OPTION: return conveyor consisting of:
            ********************************************

            Cross conveyor with lifting-lowering device consisting of:
            -------------------------------------------------- -------------
            Longitudinal transport track driven 2200 mm
            Cross transport driven 1150 mm
            Longitudinal transport track driven 2200 mm

            Roller conveyor not driven back to the operator
            ----------------------------------
            More price for back transport system: 8.500,00 Euro

            (Technical data according to manufacturer - without guarantee!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine WEDLER Wedling


          • A-Z Maschinenhandel GmbH
          • Daimlerstr. 24
          • 73037 Göppingen
          • Deutschland

          • +49 (0) 7161 9873363
            +49 (0) 7161 9873364
          • info@a-z-maschinenhandel.de
            www.a-z-maschinenhandel.de
          #1128-2749 · Sanding machine

          WEDLER - Wedling - - -

          Technical details
          Number of sanding units unbek. st.︱sanding width unbek. mm︱Sanding height max. mm︱
            Number of sanding units unbek. st.
            sanding width unbek. mm


        • A-Z Maschinenhandel GmbH
        • Daimlerstr. 24
        • 73037 Göppingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Window production: wood Sanding machine HESS Junior


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2583 · Sanding machine

          HESS - Junior - - -

          Technical details
          Number of sanding units 2 St.︱sanding width 190 mm︱Sanding height max. 4-150 mm︱
          Hess Junior single wood sanding machine -------------------------------- Machine is in checking process Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration damping. Staggered grinding units with large ones Belt drive drums for slip-free belt run. Two-point suction for direct and airborne dust extraction with integrated blow-off device. Grinding units in heavy steel plate construction as a basic basis for vibration-damped, quiet tape run. All guides as a ball linear set on hardened and ground shafts. Permanent precision through dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced relationship for abrasive belt grain loading. The large-sized drive drums guarantee full transmission of the 5.5 kW drive power of the Sanding motors on the sanding belt. As a result, strongest chip removal possible. Automatic machine stop triggering in the event of a belt break. Optical display on control panel. Sanding shoe for finish made of special material with optimal Heat dissipation and additional sliding lining. Easy handling at Pad change. Sanding belt tension over appropriately dimensioned Compression springs. Sanding belt relaxation for belt change using pneumatic Device for sensitive, distortion-free application of new tapes. Upper Central motorized grinding unit and brush device (additional equipment) adjustable. Timber guide in the inlet area for hard guide and Pressure rollers. Tilt-proof transport of profiled workpieces calibrated conveyor belts with continuously adjustable Feed rate. Automatic machine stop triggered by wood thickness control device. Optical display of the control panel. Infeed table via fine, precise threaded spindle for lower Grinding chip removal manually adjustable via a scale (resolution 0.1 mm). The length Pedestal table guide guarantees absolute parallel adjustment. The Flight circle adjustment to the exit table is achieved by adjusting the height of the lower Grinding unit via precise threaded spindle and scale display (resolution 0.1 mm) accomplished. Clear, user-friendly arrangement of all electrical functional, operating and display elements on the machine front: grinding unit below, Grinding unit above, workpiece transport device, Sanding thickness adjustment, brushing device up / down, belt utilization, Operating display, fault display. All motors are against overload electrically protected. Technical specifications : -------------------------------- Sanding belt speed: 25 m / sec. Grinding width: 190 mm Sanding thickness: 4 - 150 mm Shortest workpiece length: 280 mm Feed speed, continuously adjustable 5 - 25 m / min. Sanding belt dimensions: 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection: 400 V., 3 / N, 50 Hz. Pneumatic connection: R 3/8 ", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed: 0.75 kW height adjustment: 0.18 kW Pneumatic connection: R 3/8 ", 80 NL, min. 6 bar, max. 8 bar Amount of exhaust air: 2 x 2000 to 2500 m3 / h 20 - 25 m / sec. Extraction connection piece: 2 x 180 mm diameter, at the top of the machine housing External dimensions: without control cabinet 1750 mm width, 1850 mm height, 1000 mm depth with switch cabinet 1960 mm width, 1850 mm height, 1000 mm depth Working height: 835 mm in the range of 4-20 mm only without a guide ruler Painting: RAL 7030 stone gray with RAL 1018 zinc yellow Additional equipment: 1 digital display for motor. Grinding thickness adjustment 1 set up for oscillator. Sanding belt utilization device for oscillating Sanding belt utilization to increase the service life of the sanding belts and improve them the surface finish through motor-driven adjustment of the grinding unit. Connected load: 0.12 kW, 380 V, 3 / N, 50 Hz 1 brushing and finishing device, for a better surface finish, integrated in the basic machine. Two special brush rollers 150 mm arranged one above the other Diameter in synchronism with the feed. Separate height adjustment of the Brush rollers on precise slide guides for wear correction. 1 pneumatic workpiece removal device after the brushing and finishing Facility Device for determining wood thickness VIDEO shows machine of the same type (Technical data according to the manufacturer, without guarantee!)
            Number of sanding units 2 St.
            sanding width 190 mm
            Sanding height max. 4-150 mm
            Description :
            Hess Junior single wood sanding machine
            --------------------------------
            Machine is in checking process

            Basic structure:

            Stable, heavy welded construction made of thick-walled rectangular hollow
            profiles
            with additional, statically calculated reinforcements for optimal
            Vibration damping.

            Staggered grinding units with large ones
            Belt drive drums for slip-free belt run. Two-point suction for direct
            and airborne dust extraction with integrated blow-off device. Grinding units
            in heavy steel plate construction as a basic basis for vibration-damped,
            quiet tape run. All guides as a ball linear set on hardened and
            ground shafts. Permanent precision through dust and dirt protection
            the ball linear sets. Contact roller and sanding pad in a balanced relationship
            for abrasive belt grain loading. The large-sized drive drums
            guarantee full transmission of the 5.5 kW drive power of the
            Sanding motors on the sanding belt. As a result, strongest chip removal
            possible. Automatic machine stop triggering in the event of a belt break.
            Optical display
            on control panel. Sanding shoe for finish made of special material with optimal
            Heat dissipation and additional sliding lining. Easy handling at
            Pad change. Sanding belt tension over appropriately dimensioned
            Compression springs. Sanding belt relaxation for belt change using pneumatic
            Device for sensitive, distortion-free application of new tapes. Upper
            Central motorized grinding unit and brush device (additional equipment)
            adjustable.

            Timber guide in the inlet area for hard guide and
            Pressure rollers. Tilt-proof transport of profiled workpieces
            calibrated conveyor belts with continuously adjustable
            Feed rate.

            Automatic machine stop triggered by wood thickness control device.
            Optical display of the control panel.

            Infeed table via fine, precise threaded spindle for lower
            Grinding chip removal manually adjustable via a scale (resolution 0.1 mm). The
            length
            Pedestal table guide guarantees absolute parallel adjustment. The
            Flight circle adjustment to the exit table is achieved by adjusting the height
            of the lower
            Grinding unit via precise threaded spindle and scale display (resolution 0.1
            mm) accomplished.

            Clear, user-friendly arrangement of all electrical functional, operating
            and display elements on the machine front: grinding unit below,
            Grinding unit above, workpiece transport device,
            Sanding thickness adjustment, brushing device up / down, belt utilization,
            Operating display, fault display. All motors are against overload
            electrically protected.

            Technical specifications :
            --------------------------------

            Sanding belt speed: 25 m / sec.
            Grinding width: 190 mm
            Sanding thickness: 4 - 150 mm
            Shortest workpiece length: 280 mm

            Feed speed, continuously adjustable 5 - 25 m / min.

            Sanding belt dimensions: 200 mm width, 1850 mm length

            Electrical equipment according to VDE

            Electrical connection: 400 V., 3 / N, 50 Hz.

            Pneumatic connection: R 3/8 ", 6 bar, 80 NL grinding units: 2 x 5.5 kW feed:
            0.75 kW height adjustment: 0.18 kW

            Pneumatic connection: R 3/8 ", 80 NL, min. 6 bar, max. 8 bar Amount of exhaust
            air: 2 x
            2000 to 2500 m3 / h 20 - 25 m / sec.

            Extraction connection piece: 2 x 180 mm diameter, at the top of the machine
            housing

            External dimensions: without control cabinet 1750 mm width, 1850 mm height,
            1000 mm depth

            with switch cabinet 1960 mm width, 1850 mm height, 1000 mm depth

            Working height: 835 mm

            in the range of 4-20 mm only without a guide ruler
            Painting: RAL 7030 stone gray with RAL 1018 zinc yellow

            Additional equipment:

            1 digital display for motor. Grinding thickness adjustment

            1 set up for oscillator. Sanding belt utilization device for oscillating
            Sanding belt utilization to increase the service life of the sanding belts and
            improve them
            the surface finish through motor-driven adjustment of the grinding unit.
            Connected load: 0.12 kW, 380 V, 3 / N, 50 Hz

            1 brushing and finishing device, for a better surface finish, integrated in
            the basic machine. Two special brush rollers 150 mm arranged one above the other
            Diameter in synchronism with the feed. Separate height adjustment of the
            Brush rollers on precise slide guides for wear correction.

            1 pneumatic workpiece removal device after the brushing and finishing
            Facility

            Device for determining wood thickness

            VIDEO shows machine of the same type

            (Technical data according to the manufacturer, without guarantee!)


        • Gebr. Engelfried oHG
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          LÖWER - QUICKWOOD - MB - HESS - WEDLER -