Європейська мережа дилерів акціонерної техніки

Категорія:
    Виробник:
      машини:
        Трейдер:

          Window production centre

          Machinelist: Window production centre


          Window production centre

          used Window production: wood Window production centre WEINIG Unicontrol 6 CNC Spindeln


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6693 · Window production centre

          WEINIG - Unicontrol 6 CNC Spindeln - - neuwertig - Touchscreen/Weinig Nexus

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱Control Touchscreen/Weinig Nexus
          Weinig Unicontrol 6 with CNC spindles Technical data summary (please inquire about any additional accessories included) Pos. 1: cross-cut saw ---------------------------- > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max .: 400 mm > Motor power: 3.7 kW > Radially pneumatically controlled adjustment path to 8 positions, e.g. for edge rounding from above > Laser guide light to detect the saw section Pos. 2: Rounding unit horizontally below ---------------------------- > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9000 rpm > Tool flight circle max .: 130 mm > Axial adjustment path mechanically coupled with cross-cut saw > Radial pneumatic adjustment on / off controlled CNC controlled length stop ---------------------------- > Length 3500 mm Pos. 3: Tenoning and slotted spindle ---------------------------- > Number of tools: variable, stepless adjustment, CNC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment, CNC for IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max .: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 11.0 kW Pos. 5: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, stepless adjustment, CNC > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment, CNC for IV 68-92 > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle pneumatically controlled axially, 2 positions Rung guide consisting of: Guide ruler in the stop (area synchronous spindle), Bar support bar from above in the area of ??the profile milling unit, vertical right and profiling spindle. Pos. 5: Profile milling unit, horizontal above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-position turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max .: 210 mm > Motor power: 3.8 kW Pos. 7: Profile milling unit / grooving unit from below ---------------------------- > Tool clamping length: 125 mm > Axial adjustment range 8 positions > Radial adjustment path NC axis > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max .: 200 mm > Motor power: 3.8 kW Other features ---------------------------- > online capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Circulation device for tear-free circulation > Double part package > Return conveyor for one-man operation: slat conveyor > Screen controls > Inclined window equipment > Electronic angle display for sloping windows > Industrial PC, touchscreen with Windows PC control / NEXUS > Including Weinig type production program Option: ---------------------------- Used tools for various wood and wood-aluminum window and door systems, see drawings The technical characteristics of this machine should suit your ideas do not match, please contact us. Our A team with many years of experience will be happy to assist you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            Control Touchscreen/Weinig Nexus
            Description :
            Weinig Unicontrol 6 with CNC spindles

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: cross-cut saw
            ----------------------------
            > Number of tools: 1 pc.
            > Spindle speed: 3000-6000 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max .: 400 mm
            > Motor power: 3.7 kW
            > Radially pneumatically controlled adjustment path to 8 positions,
            e.g. for edge rounding from above
            > Laser guide light to detect the saw section

            Pos. 2: Rounding unit horizontally below
            ----------------------------
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Clamping length 25 mm
            > Spindle speed: 9000 rpm
            > Tool flight circle max .: 130 mm
            > Axial adjustment path mechanically coupled with cross-cut saw
            > Radial pneumatic adjustment on / off controlled

            CNC controlled length stop
            ----------------------------
            > Length 3500 mm

            Pos. 3: Tenoning and slotted spindle
            ----------------------------
            > Number of tools: variable, stepless adjustment, CNC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment, CNC for IV 68-92
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max .: 320 mm
            > Motor power: 11 kW

            Pos. 4: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 11.0 kW


            Pos. 5: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, stepless adjustment, CNC
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment, CNC for IV 68-92
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle pneumatically controlled axially, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area synchronous spindle),
            Bar support bar from above in the area of ??the profile milling unit, vertical
            right
            and profiling spindle.

            Pos. 5: Profile milling unit, horizontal above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.8 kW
            > Speed ??9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment range 125 mm, 8 positions

            Pos. 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 110 mm, 8-position turret
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max .: 210 mm
            > Motor power: 3.8 kW


            Pos. 7: Profile milling unit / grooving unit from below
            ----------------------------
            > Tool clamping length: 125 mm
            > Axial adjustment range 8 positions
            > Radial adjustment path NC axis
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max .: 200 mm
            > Motor power: 3.8 kW

            Other features
            ----------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed bar clamping
            > Circulation device for tear-free circulation
            > Double part package
            > Return conveyor for one-man operation: slat conveyor
            > Screen controls
            > Inclined window equipment
            > Electronic angle display for sloping windows
            > Industrial PC, touchscreen with Windows PC control / NEXUS
            > Including Weinig type production program

            Option:
            ----------------------------

            Used tools for various wood and wood-aluminum window and door systems, see
            drawings

            The technical characteristics of this machine should suit your ideas
            do not match, please contact us. Our
            A team with many years of experience will be happy to assist you with any
            adjustments
            or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre HABERKORN Nutaggregat von unten


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5968 · Window production centre

          HABERKORN - Nutaggregat von unten - - Neu -

          Technical details
          Tenoning spindle , ︱Number of milling agregates 1 St.︱Spindle diameter 40 mm︱
          Grooving unit Angle 700 x 600 mm height adjustable about 850 - 1000 mm Feed with 4 wheels, 4 speed Motor about 2.2 kW, 3000 rpm. Shaft diameter 40 mm, with left-hand threads Wavelength 80 mm Nuter pneumatic up-down Stop for Nuter top turret with 6 adjustable stop screws Absaugdurchmesser 80 mm Tool diameter max. 300 mm control: -------------- pre-installed with 16 A Euro plug 400 V AC, 2.9 KW, 50 Hz Colour: RAL 7035 light gray (technical details according to manufacturer - without guarantee!)
            Tenoning spindle ,
            Number of milling agregates 1 St.
            Spindle diameter 40 mm
            Description :
            Grooving unit Angle

            700 x 600 mm
            height adjustable about 850 - 1000 mm
            Feed with 4 wheels, 4 speed
            Motor about 2.2 kW, 3000 rpm.
            Shaft diameter 40 mm, with left-hand threads
            Wavelength 80 mm
            Nuter pneumatic up-down
            Stop for Nuter top turret
            with 6 adjustable stop screws
            Absaugdurchmesser 80 mm
            Tool diameter max. 300 mm

            control:
            --------------
            pre-installed with 16 A Euro plug
            400 V AC, 2.9 KW, 50 Hz

            Colour: RAL 7035 light gray

            (technical details according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre GUBISCH Centromat CD-Super Online


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6698 · Window production centre

          GUBISCH - Centromat CD-Super Online - - gebraucht -

          Technical details
          Tenoning spindle 4 St.︱Number of milling agregates 6 St.︱Spindle diameter 50 mm︱
          # 945 Gubisch Centromat CD Super ...................................................................................................................................... Production capacity in 8 hours, approx. 150 pcs. Technical details summary (please ask for possibly more included equpment) ...................................................................................................................................... 1 pair Cut-off saw ...................................................................................................................................... > 2 cut-off saw electronic controlled: yes > number of tools: 1 pcs. > number of revolutions of spindle: 3000 rpm > tools diameter maximum: 350 mm > motor power: 3 kW 2 pairs tenoning spindle (1 pair middle/vertical; 1 pair behind/vertical) ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke: 3x100 mm > number of revolutions of spindle: 4200 rpm > spindle diameter: 50 mm > tool clamping length: 300 mm > tools diameter maximum: 320 mm > motor power: 11 kW 3 profiling spindles vertical right ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke vertical: 3x100 mm > number of revolutions of spindle: 6000 rpm > spindle diameter: 50 mm > tool clamping length: 300 mm > tools diameter maximum: 230 mm > motor power: 9,2 kW 3 profiling spindles vertical left ...................................................................................................................................... > number of tools: 3 pcs. > spindle stroke vertical: 3x100 mm > number of revolutions of spindle: 6000 rpm > spindle diameter: 50 mm > tool clamping length: 300 mm > tools diameter maximum: 230 mm > motor power: 9,2 kW More features ...................................................................................................................................... > possibility to work online: yes > double piece package: yes > monitor control: yes Option: > 1 used window tool kit IV 68 We also can offer you new window tools IV 78 If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! Technical details according to manufacturer - without guarantee! 1 window production line Modell CENTROMAT CD SUPER – chained - consisting of: 1 double sided tenoning machine, with 2 multi stroke spindles per side Fabr. GUBISCH Typ CD-Z 1 transport system to the profiling machine Fabr. GUBISCH Typ RF4M 1 profiling machine with 3 left and 3 rigth multi stroke spndles Fabr. GUBISCH Typ CDF 1 crosswise transport system Fabr. GUBISCH Typ RF4M Option: 1 complete window tool kit IV 68 technical data according to manufacturer - without garantee! AUSFÜHRLICHE BESCHREIBUNG: 1 GUBISCH - Fensterfertigungsstraße Typ CENTROMAT-CD-SUPER Leistung 3 - 4 Teile pro Minute mit nachfolgenden Maschinenkomponenten: Pos. 1.: 1 Doppelseitiger Zapfenschneider im Taktverfahren Type CDZ - rechte und linke Seite verfahrbar - Werkstücklänge, max. 3.400 mm Außenmaß - Werkstücklänge, min. 320 mm Brüstungsmaß (LM) (abhängig vom tatsächlichen Werkzeugdurchmesser der Schlitzspindel !) - Werkstückdicke, max. 80 mm - Werkstückdicke, min. 56 mm - Vorschubgeschwindigkeit : im Sägebereich 18 m / Min. im Werkzeugbereich 9 m / Min. im Eilrücklauf 36 m / Min. - beidseitige, elektronische Breitenpositionierung durch Schnellverstellung über Kugelrollspindeln - pneumatische Werkstückspannung - automatische Konterholzeinrichtung mit 6 zusätzl. Konterhölzern im Zubehör - Doppelteilevorrichtung zum Spannen von 2 Werkstücken mit Vereinzelung vor der Fräsmaschine von gleich breiten Teilen mit : max. 2 x 80 mm bzw. 82 mm (Profilgleich), min. Breite 2 x 50 mm - Doppeltaktsteuerung zur Herstellung von Konterprofilen durch zweimaliges Durch- fahren mit unterschiedlichen Hubstellungen. - 4 Motorbremsen Aggregatenanordnung : 1 Paar Akkürzsägen, vorne / oben - horizontal programmgesteuert, über elektronische Positionierachsen - Motorleistung 3,0 kW mit Direktantrieb - Sägeflansch für 80 mm Sägeblattbohrung - Flugkreisdurchmesser 350 mm - Drehzahl 3.000-1 1 Paar Fräsaggregate, mitte / vertikal - Motorleistung 11,0 kW über Riemenantrieb - automatische Stern-Dreieck-Schaltung - Spindeldurchmesser 50 mm - Flugkreisdurchmesser 320 mm - Spannlänge 300 mm, 2-fach-Hub - Hubspindel für 3 Stellungen a 100 mm - Verstellung pneumatisch hoch/tief - vor/zurück - Drehzahl der Spindel ca. 4200 upm - für Werkzeug Null-Höhe 10 mm Hubstellung in oberster Position 10 mm unter Tischauflage Hubstellung in unterster Position 210 mm unter Tischauflage 1 Paar Fräsaggregate, hinten / vertikal - Motorleistung 11,0 kW über Riemenantrieb - automatische Stern-Dreieck-Schaltung - Spindeldurchmesser 50 mm - Flugkreisdurchmesser 320 mm - Spannlänge 300 mm, 2-fach-Hub - Hubspindel für 3 Stellungen a 100 mm - Verstellung pneumatisch hoch/tief - vor/zurück - Drehzahl der Spindel ca. 4200 upm - für Werkzeug Null-Höhe 10 mm Hubstellung in oberster Position 10 mm unter Tischauflage Hubstellung in unterster Position 210 mm unter Tischauflage Pos. 2.: Abschiebevorrichtung und Transportrollenbahn Ca. 7.000 mm lang, mit 2 Antrieben, stufenlos regelbar, zur Fräseinheit, nach links laufend mit pneumatisch gesteuerter Vereinzelung. Pos. 3.: Fräsautomat, Type CDF Original GUBISCH Fräsautomat, komplett und betriebsbereit, wie nachfolgend beschrieben : - Arbeitsbreite max. 170 mm, min. 50 mm - Arbeitshöhe max. 80 mm, min. 56 mm - Holzlänge min. 320 mm, jedoch profilabhängig ! - Vorschub auf zwei Säulen gelagerter schwerer Vorschub. Zum einfachen problemnlosen Werkzeugwechsel über Tischauflage verfahrbar ! - Vorschubantrieb 2,2 kW Geschwindigkeit stufenlos regelbar 5 - 19 m / Min. Vorschubrücklauf im Tippbetrieb mit Sicherheits- schlüsselschalter. - Vorschubhöhenverstellung 0,75 kW elektromotorisch - Vorschubwalzeneinheiten Walzenandruck = pneumatisch kurzer Walzenabstand - Vorschubwalzen 3, gegenüber den linken Spindeln pneumatisch horizontal verschiebbar mit Kollisionsschutz - Tische und Anschläge im Bereich der Fräswerkzeuge mit spez. Schichtholzlippen/Platten ausgelegt. - Tischabblasung für horizontale Tische, jeweils vor Einlauf eines neues Werkstückes. - Gleitmittelpumpe automatisch, mit Mengendrosselung und Zeittaktschaltung - Elektrische Ausrüstung aller Maschinen: nach VDE für 380 V, 50 Hz. Schutzart IP 54, NOT-AUS-Schalter - Steuerung Direktschaltung bis einschl. 5,5 kW. Ab 7,5 kW einschl. automat. Stern-Dreieck-Schaltung - Maschinenabdeckung Vorderseite aufklappbar mit Plexiglasfenster, ausgefüllt mit Lärmdämmaterial Aggregatenanordnung : 1. SPINDEL - Lage der Spindel vertikal, rechts - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 70 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U - Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 2. SPINDEL - Lage der Spindel vertikal, rechts - Funktion Profilherstellung - Motorleistung 9,2 kW, Riemenantrieb - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Nutzhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 70 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U - Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 3. SPINDEL - Lage der Spindel vertikal, rechts - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 70 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 4. SPINDEL - Lage der Spindel vertikal links - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 50 - 170 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 5. SPINDEL - Lage der Spindel vertikal links - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 50 - 170 mm, vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge 6. SPINDEL - Lage der Spindel vertikal links - Funktion Profilherstellung - Motorleistung 9,2 kW - Spindeldrehzahl 6.000 UpM - Spindeldurchmesser 50 mm - Spindelnutzlänge 300 mm - Spannhöhe 300 mm - Flugkreisdurchmesser 112 - 230 mm - Verstellbereich horizontal 50 - 170 mm vertikal 200 mm für Werkzeug - 0 - Höhe = 10 mm - Art der Verstellung pneumatisch im U-Hub - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge Rechte Anschläge : Nr. 1, 2 und 3 Pneumatisch programmgesteuert 0 oder 1 mm Spanabnahme Linke Anschläge : Pneumatisch gesteuert für unterschiedliche Holzbreiten. · elektronische Breitenverstellung der linken Spindeln, programmeingebunden · 6 Motorbremsen Pos. 4 Längs-Querförderer als Abnahmestation, Puffer für 350 mm bis 3500 mm lange Werkstücke, Pufferstrecke ca. 1400 mm. Pos. 5 Elektronische Zentralsteuerung der Anlage durch das GUBISCH-Maschinenablaufprogramm - Bedienungsterminal mit Industrie-PC und Bildschirm - 120 Kombiprogramme frei vom Anwender einzugeben / programmierbar. 1 Programm enthält alle Werkzeugkombinationen für die Quer- und Längsbearbeitung - je 200 Einzelprogramme für Endprofil links, rechts Längsprofil links, rechts - Stücklistenspeicher zur Aufnahme der Holzdatei/Listen - Online Schnittstelle RS 232/20 mA technische Angaben laut Hersteller - ohne Gewähr! Mechanische, elektrische und elektronische Verkettung innerhalb der Anlage. * Alle Maschinenhauben mit Antidröhnfolie ausgelegt. * Unsere Maschinen sind nach deutschen Vorschriften und Normen ausgelegt ! * Maschinen komplett mit allen Bedienungswerkzeugen, jedoch ohne Bearbeitungswerkzeuge. * Umwehrungen und Schutzgitter sind bauseitig zu stellen, soweit es die Sicherheit betrifft technical data according to manufacturer - without guarantee!
            Tenoning spindle 4 St.
            Number of milling agregates 6 St.
            Spindle diameter 50 mm
            Description :
            # 945 Gubisch Centromat CD Super
            ......................................................................................................................................
            Production capacity in 8 hours, approx. 150 pcs.


            Technical details summary
            (please ask for possibly more included equpment)
            ......................................................................................................................................

            1 pair Cut-off saw
            ......................................................................................................................................
            > 2 cut-off saw electronic controlled: yes
            > number of tools: 1 pcs.
            > number of revolutions of spindle: 3000 rpm
            > tools diameter maximum: 350 mm
            > motor power: 3 kW

            2 pairs tenoning spindle (1 pair middle/vertical; 1 pair behind/vertical)
            ......................................................................................................................................
            > number of tools: 3 pcs.
            > spindle stroke: 3x100 mm
            > number of revolutions of spindle: 4200 rpm
            > spindle diameter: 50 mm
            > tool clamping length: 300 mm
            > tools diameter maximum: 320 mm
            > motor power: 11 kW

            3 profiling spindles vertical right
            ......................................................................................................................................

            > number of tools: 3 pcs.
            > spindle stroke vertical: 3x100 mm
            > number of revolutions of spindle: 6000 rpm
            > spindle diameter: 50 mm
            > tool clamping length: 300 mm
            > tools diameter maximum: 230 mm
            > motor power: 9,2 kW

            3 profiling spindles vertical left
            ......................................................................................................................................

            > number of tools: 3 pcs.
            > spindle stroke vertical: 3x100 mm
            > number of revolutions of spindle: 6000 rpm
            > spindle diameter: 50 mm
            > tool clamping length: 300 mm
            > tools diameter maximum: 230 mm
            > motor power: 9,2 kW

            More features
            ......................................................................................................................................

            > possibility to work online: yes
            > double piece package: yes
            > monitor control: yes

            Option:
            > 1 used window tool kit IV 68
            We also can offer you new window tools IV 78

            If the technical characteristics of this machines donnot fit with your requirements,
            please get in contact with us. Our longtime experienced team is looking forward to support
            you in technical adaptions or in finding a suitable machine for you!

            Technical details according to manufacturer - without guarantee!


            1 window production line Modell CENTROMAT CD SUPER
            – chained - consisting of:

            1 double sided tenoning machine, with 2 multi stroke spindles per side
            Fabr. GUBISCH Typ CD-Z

            1 transport system to the profiling machine Fabr. GUBISCH Typ RF4M

            1 profiling machine with 3 left and 3 rigth multi stroke spndles
            Fabr. GUBISCH Typ CDF

            1 crosswise transport system
            Fabr. GUBISCH Typ RF4M

            Option: 1 complete window tool kit IV 68

            technical data according to manufacturer - without garantee!

            AUSFÜHRLICHE BESCHREIBUNG:
            1 GUBISCH - Fensterfertigungsstraße Typ CENTROMAT-CD-SUPER
            Leistung 3 - 4 Teile pro Minute

            mit nachfolgenden Maschinenkomponenten:

            Pos. 1.: 1 Doppelseitiger Zapfenschneider im Taktverfahren Type CDZ

            - rechte und linke Seite verfahrbar
            - Werkstücklänge, max. 3.400 mm Außenmaß
            - Werkstücklänge, min. 320 mm Brüstungsmaß (LM)
            (abhängig vom tatsächlichen Werkzeugdurchmesser der Schlitzspindel !)

            - Werkstückdicke, max. 80 mm
            - Werkstückdicke, min. 56 mm
            - Vorschubgeschwindigkeit :
            im Sägebereich 18 m / Min.
            im Werkzeugbereich 9 m / Min.
            im Eilrücklauf 36 m / Min.
            - beidseitige, elektronische Breitenpositionierung durch Schnellverstellung
            über Kugelrollspindeln
            - pneumatische Werkstückspannung
            - automatische Konterholzeinrichtung mit 6 zusätzl. Konterhölzern im Zubehör

            - Doppelteilevorrichtung zum Spannen von 2 Werkstücken mit Vereinzelung vor
            der Fräsmaschine von gleich breiten Teilen mit :
            max. 2 x 80 mm bzw. 82 mm (Profilgleich),
            min. Breite 2 x 50 mm

            - Doppeltaktsteuerung zur Herstellung von Konterprofilen durch zweimaliges Durch-
            fahren mit unterschiedlichen Hubstellungen.

            - 4 Motorbremsen

            Aggregatenanordnung :

            1 Paar Akkürzsägen, vorne / oben
            - horizontal programmgesteuert, über elektronische Positionierachsen
            - Motorleistung 3,0 kW mit Direktantrieb
            - Sägeflansch für 80 mm Sägeblattbohrung
            - Flugkreisdurchmesser 350 mm
            - Drehzahl 3.000-1

            1 Paar Fräsaggregate, mitte / vertikal
            - Motorleistung 11,0 kW über Riemenantrieb
            - automatische Stern-Dreieck-Schaltung
            - Spindeldurchmesser 50 mm
            - Flugkreisdurchmesser 320 mm

            - Spannlänge 300 mm, 2-fach-Hub
            - Hubspindel für 3 Stellungen a 100 mm
            - Verstellung pneumatisch hoch/tief - vor/zurück
            - Drehzahl der Spindel ca. 4200 upm
            - für Werkzeug Null-Höhe 10 mm
            Hubstellung in oberster Position 10 mm unter Tischauflage
            Hubstellung in unterster Position 210 mm unter Tischauflage

            1 Paar Fräsaggregate, hinten / vertikal
            - Motorleistung 11,0 kW über Riemenantrieb
            - automatische Stern-Dreieck-Schaltung
            - Spindeldurchmesser 50 mm
            - Flugkreisdurchmesser 320 mm

            - Spannlänge 300 mm, 2-fach-Hub
            - Hubspindel für 3 Stellungen a 100 mm
            - Verstellung pneumatisch hoch/tief - vor/zurück
            - Drehzahl der Spindel ca. 4200 upm
            - für Werkzeug Null-Höhe 10 mm
            Hubstellung in oberster Position 10 mm unter Tischauflage
            Hubstellung in unterster Position 210 mm unter Tischauflage


            Pos. 2.: Abschiebevorrichtung und Transportrollenbahn
            Ca. 7.000 mm lang, mit 2 Antrieben, stufenlos regelbar, zur Fräseinheit,
            nach links laufend mit pneumatisch gesteuerter Vereinzelung.


            Pos. 3.: Fräsautomat, Type CDF

            Original GUBISCH Fräsautomat, komplett und betriebsbereit, wie nachfolgend beschrieben :

            - Arbeitsbreite max. 170 mm, min. 50 mm
            - Arbeitshöhe max. 80 mm, min. 56 mm

            - Holzlänge min. 320 mm, jedoch profilabhängig !

            - Vorschub auf zwei Säulen gelagerter schwerer Vorschub. Zum einfachen
            problemnlosen Werkzeugwechsel über Tischauflage verfahrbar !

            - Vorschubantrieb 2,2 kW

            Geschwindigkeit stufenlos regelbar 5 - 19 m / Min.
            Vorschubrücklauf im Tippbetrieb mit Sicherheits-
            schlüsselschalter.

            - Vorschubhöhenverstellung 0,75 kW elektromotorisch

            - Vorschubwalzeneinheiten Walzenandruck = pneumatisch
            kurzer Walzenabstand
            - Vorschubwalzen 3, gegenüber den linken Spindeln pneumatisch
            horizontal verschiebbar mit Kollisionsschutz

            - Tische und Anschläge im Bereich der Fräswerkzeuge mit spez.
            Schichtholzlippen/Platten ausgelegt.

            - Tischabblasung für horizontale Tische, jeweils vor Einlauf eines
            neues Werkstückes.

            - Gleitmittelpumpe automatisch, mit Mengendrosselung und Zeittaktschaltung

            - Elektrische Ausrüstung aller Maschinen: nach VDE für 380 V, 50 Hz.
            Schutzart IP 54, NOT-AUS-Schalter

            - Steuerung Direktschaltung bis einschl. 5,5 kW.
            Ab 7,5 kW einschl. automat. Stern-Dreieck-Schaltung

            - Maschinenabdeckung Vorderseite aufklappbar mit Plexiglasfenster,
            ausgefüllt mit Lärmdämmaterial

            Aggregatenanordnung :

            1. SPINDEL
            - Lage der Spindel vertikal, rechts
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 70 mm, vertikal 200 mm
            für Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U - Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            2. SPINDEL
            - Lage der Spindel vertikal, rechts
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW, Riemenantrieb
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Nutzhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 70 mm, vertikal 200 mm
            für Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U - Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            3. SPINDEL
            - Lage der Spindel vertikal, rechts
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 70 mm, vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge


            4. SPINDEL
            - Lage der Spindel vertikal links
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 50 - 170 mm, vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            5. SPINDEL
            - Lage der Spindel vertikal links
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 50 - 170 mm,
            vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            6. SPINDEL
            - Lage der Spindel vertikal links
            - Funktion Profilherstellung
            - Motorleistung 9,2 kW
            - Spindeldrehzahl 6.000 UpM
            - Spindeldurchmesser 50 mm
            - Spindelnutzlänge 300 mm
            - Spannhöhe 300 mm
            - Flugkreisdurchmesser 112 - 230 mm
            - Verstellbereich horizontal 50 - 170 mm
            vertikal 200 mm für
            Werkzeug - 0 - Höhe = 10 mm
            - Art der Verstellung pneumatisch im U-Hub
            - Anzahl der Werkzeuge 3 x 100 mm max. Klemmlänge

            Rechte Anschläge : Nr. 1, 2 und 3
            Pneumatisch programmgesteuert 0 oder 1 mm Spanabnahme

            Linke Anschläge :
            Pneumatisch gesteuert für unterschiedliche Holzbreiten.

            · elektronische Breitenverstellung der linken Spindeln, programmeingebunden

            · 6 Motorbremsen

            Pos. 4
            Längs-Querförderer als Abnahmestation, Puffer für 350 mm bis 3500 mm lange Werkstücke, Pufferstrecke ca. 1400 mm.

            Pos. 5
            Elektronische Zentralsteuerung der Anlage durch das GUBISCH-Maschinenablaufprogramm
            - Bedienungsterminal mit Industrie-PC und Bildschirm
            - 120 Kombiprogramme frei vom Anwender einzugeben / programmierbar. 1 Programm enthält alle Werkzeugkombinationen für die Quer- und Längsbearbeitung
            - je 200 Einzelprogramme für Endprofil links, rechts
            Längsprofil links, rechts
            - Stücklistenspeicher zur Aufnahme der Holzdatei/Listen
            - Online Schnittstelle RS 232/20 mA

            technische Angaben laut Hersteller - ohne Gewähr!

            Mechanische, elektrische und elektronische Verkettung innerhalb der Anlage.

            * Alle Maschinenhauben mit Antidröhnfolie ausgelegt.

            * Unsere Maschinen sind nach deutschen Vorschriften und Normen ausgelegt !

            * Maschinen komplett mit allen Bedienungswerkzeugen, jedoch ohne
            Bearbeitungswerkzeuge.

            * Umwehrungen und Schutzgitter sind bauseitig zu stellen, soweit es die Sicherheit betrifft

            technical data according to manufacturer - without guarantee!


          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 CNC Spindeln


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2561 · Window production centre

          WEINIG - Unicontrol 12 CNC Spindeln - - gebraucht - PC-Steuerung/NEXUS

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 7 St.︱Spindle diameter 50 mm︱Control PC-Steuerung/NEXUS
          Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .................................................. Technical data summary (please inquire about any additional accessories included) .................................................. .... Cross-cut saw .................................................. .... > Cross-cut saw electronically, horizontally continuously adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max .: 400 mm > Motor power: 3.7 kW > Laser guide light to detect the saw section > Axial adjustment 150 mm electronically stepless > Radial pneumatic adjustment path 8 positions for e.g. Edge rounding from above Rounding aggregate .................................................. .... > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Spindle speed: 9000 rpm > Tool flight circle max .: 130 mm > Axial adjustment path by means of an NC axis with cross-cut saw. > Radial pneumatically controlled adjustment path with 8-fold revolver electronic length stop .................................................. .... > Length 4500 mm 1. Tenoning and slotted spindle .................................................. .... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter max .: 380 mm 2. Tenoning and slotted spindle .................................................. .... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment path: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter max .: 380 mm Transfer tape .................................................. .... For the transfer of the parts to the longitudinal processing included Double part separation before entering the longitudinal processing. Motor with brake 0.2 KW Conveying path 2500 mm Double parts max. 3000 mm 1. Profiling spindle (synchronous and counter-rotating) .................................................. .... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool flight circle min .: 140 mm > Tool flight circle max .: 232 mm > 2 feed rollers opposite the spindle axially pneumatically controlled 8 positions. 2. Profiling spindle .................................................. .... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool flight circle min .: 140 mm > Tool flight circle max .: 232 mm > 2 feed rollers opposite the spindle axially pneumatically controlled 8 positions. 3. Profile milling unit (grooving device from above) .................................................. .... > Position: horizontally above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max .: 130 mm 4. Profiling spindle .................................................. .... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment path 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool flight circle min .: 140 mm > Tool flight circle max .: 232 mm > 2 feed rollers opposite the spindle axially pneumatically controlled 8 positions. > Timed guide ruler in the stop with rung support bar from above in Area of ??profile milling unit vertical right. 5. Profile milling unit (fitting spindle) .................................................. .... > Position: vertical right > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Axial adjustment range 115 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max .: 210 mm > 1 feed roller opposite the spindle axially pneumatically controlled, 2 positions 6. Profile milling unit (grooving device from above), in the additional stand .................................................. .... > Position: working vertically to the right from above > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment 100 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max .: 180 mm 7. Profiling spindle (grooving device from below, in the additional stand) .................................................. .... > Position: horizontally below > Motor power: 3 kW > Spindle diameter: 40 mm > Tool clamping length: 125 mm > Axial adjustment 100 mm NC axis, stepless > Radial adjustment range 100 mm NC axis, stepless > Spindle speed: 5850 rpm > Tool flight circle max .: 200 mm Other features .................................................. .... > online capable > Circulation device for tear-free circulation > Milling carriage for milling sashes with frame widths less than 500 mm. Automatic pneumatic clamping. > Double part package > Return conveyor for one-man operation: slat conveyor > Screen controls > Inclined window equipment > Electronic angle display for sloping windows > Control: PC control NEXUS > VARIO table with horizontal NC axis > Overrun counter for both slotted spindles > Feed height adjustment with NC axis > Rung support bar > Pneumatically controlled pressure ruler on the left for wood widths of min / max. 40-260 mm. > Automatic central lubrication Option: > used window tools for Unicontrol 12 Should the technical characteristics of this machine not meet your expectations please contact us. Our longtime Our experienced team will be happy to assist you with any adjustments or with the search for a machine that meets your requirements! (Technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 7 St.
            Spindle diameter 50 mm
            Control PC-Steuerung/NEXUS
            Description :
            Weinig Uncontrol 12
            with radial and axial CNC spindles and VARIO table
            ..................................................

            Technical data summary
            (please inquire about any additional accessories included)
            .................................................. ....

            Cross-cut saw
            .................................................. ....
            > Cross-cut saw electronically, horizontally continuously adjustable
            > Number of tools: 1 pc.
            > Spindle speed: 3000-6000 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max .: 400 mm
            > Motor power: 3.7 kW
            > Laser guide light to detect the saw section
            > Axial adjustment 150 mm electronically stepless
            > Radial pneumatic adjustment path 8 positions for e.g. Edge rounding from above

            Rounding aggregate
            .................................................. ....
            > Position: horizontally below
            > Motor power: 1.5 kW
            > Spindle diameter: 20 mm
            > Spindle speed: 9000 rpm
            > Tool flight circle max .: 130 mm
            > Axial adjustment path by means of an NC axis with cross-cut saw.
            > Radial pneumatically controlled adjustment path with 8-fold revolver

            electronic length stop
            .................................................. ....
            > Length 4500 mm

            1. Tenoning and slotted spindle
            .................................................. ....
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter max .: 380 mm

            2. Tenoning and slotted spindle
            .................................................. ....
            > Number of tools: variable
            > Motor power: 15 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 640 mm, with counter bearing
            > Axial adjustment path: 580 mm NC axis, stepless
            > Spindle speed: 2,800-4,000 rpm
            > Tool diameter max .: 380 mm

            Transfer tape
            .................................................. ....
            For the transfer of the parts to the longitudinal processing included
            Double part separation before entering the longitudinal processing.
            Motor with brake 0.2 KW
            Conveying path 2500 mm
            Double parts max. 3000 mm

            1. Profiling spindle (synchronous and counter-rotating)
            .................................................. ....
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Tool flight circle min .: 140 mm
            > Tool flight circle max .: 232 mm
            > 2 feed rollers opposite the spindle
            axially pneumatically controlled 8 positions.

            2. Profiling spindle
            .................................................. ....
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Tool flight circle min .: 140 mm
            > Tool flight circle max .: 232 mm
            > 2 feed rollers opposite the spindle
            axially pneumatically controlled 8 positions.

            3. Profile milling unit (grooving device from above)
            .................................................. ....
            > Position: horizontally above
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment range 30 mm NC axis, stepless
            > Radial adjustment range 125 mm NC axis, stepless
            > Spindle speed: 9000 rpm
            > Tool flight circle max .: 130 mm

            4. Profiling spindle
            .................................................. ....
            > Position: vertical right
            > Number of tools: variable
            > Motor power: 11 kW
            > Spindle diameter: 50 mm
            > Tool clamping length: 400 mm, with counter bearing
            > Axial adjustment path 350 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 6000 rpm
            > Tool flight circle min .: 140 mm
            > Tool flight circle max .: 232 mm
            > 2 feed rollers opposite the spindle
            axially pneumatically controlled 8 positions.
            > Timed guide ruler in the stop with rung support bar from above in
            Area of ??profile milling unit vertical right.

            5. Profile milling unit (fitting spindle)
            .................................................. ....
            > Position: vertical right
            > Motor power: 3.7 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max .: 210 mm
            > 1 feed roller opposite the spindle
            axially pneumatically controlled, 2 positions

            6. Profile milling unit (grooving device from above), in the additional stand
            .................................................. ....
            > Position: working vertically to the right from above
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 40 mm
            > Axial adjustment 100 mm NC axis, stepless
            > Radial adjustment range 80 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max .: 180 mm

            7. Profiling spindle (grooving device from below, in the additional stand)
            .................................................. ....
            > Position: horizontally below
            > Motor power: 3 kW
            > Spindle diameter: 40 mm
            > Tool clamping length: 125 mm
            > Axial adjustment 100 mm NC axis, stepless
            > Radial adjustment range 100 mm NC axis, stepless
            > Spindle speed: 5850 rpm
            > Tool flight circle max .: 200 mm

            Other features
            .................................................. ....
            > online capable
            > Circulation device for tear-free circulation
            > Milling carriage for milling sashes with frame widths less than 500 mm.
            Automatic pneumatic clamping.
            > Double part package
            > Return conveyor for one-man operation: slat conveyor
            > Screen controls
            > Inclined window equipment
            > Electronic angle display for sloping windows
            > Control: PC control NEXUS
            > VARIO table with horizontal NC axis
            > Overrun counter for both slotted spindles
            > Feed height adjustment with NC axis
            > Rung support bar
            > Pneumatically controlled pressure ruler on the left
            for wood widths of min / max. 40-260 mm.
            > Automatic central lubrication

            Option:
            > used window tools for Unicontrol 12

            Should the technical characteristics of this machine not meet your expectations
            please contact us. Our longtime
            Our experienced team will be happy to assist you with any adjustments or with
            the search for a machine that meets your requirements!

            (Technical information according to the manufacturer - without guarantee!)



          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG UC-Matic CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6704 · Window production centre

          WEINIG - UC-Matic CNC - - 2008 -

          Technical details
          Tenoning spindle 3 St.︱Number of milling agregates 8 St.︱Spindle diameter 50 mm︱
          Weinig UC-Matic window production line ----------------------------------------- Weinig Powermat 500 + Weinig Unirex 2000 + Weinig Unicontrol 15 ! Line can still be viewed in use! Consisting of: ----------------------------------------- Pos 1: feed conveyor Pos. 2: Weinig Powermat 500 Working width 230 mm, working height 120 mm, 5 spindles + glazing bead saw: 1. below, 7.5 kW, diameter 40 mm, 8,000 rpm 2nd right, 7.5 kW, diameter 40 mm, 8,000 rpm 3rd left, 11.0 kW, diameter 40 mm, 8,000 rpm 4. above, 11.0 kW, PowerLock / HSK, 8,000 rpm 5. below, 7.5 kW, PowerLock / HSK, 8,000 rpm 6. Glass bead saw from above Pos. 3: longitudinal conveyor belt Pos. 4 and 5: Cross conveyor with transfer to Weinig Unicontrol 15 Pos. 6: Weinig Unitech 15, tenon slot unit: 1 stepless cross-cut saw with edge rounder from above 1 edge rounding unit from below 3 slotted spindles, each - 640 mm clamping length - Axial stepless adjustment with NC axis - diameter 50 mm - caster counter Pos. 7,8,9 transport system with turning device for 2nd run in Unitech 15 Pos. 10 and 11 cross conveyor and longitudinal transport in grinding machine Pos 12: Stähle-Hess single wood grinder from above and below Pos. 12 A: outfeed conveyor belt Pos 13: Conveyor system in the drilling and milling center Weinig Unirex 2000 Pos 13 A and Pos 14 Weinig Unirex 2000 Drilling and milling center with various units for the horizontal and vertical machining of the workpieces Pos. 15, 16, 17: Cross conveyors and conveyor belts to Weinig Univar 12 Pos 18: Longitudinal profiling machine Weinig Univar 12 4 profile spindles, vertical right each - 400 mm clamping length - Axial adjustment steplessly 350 mm NC axis - Radial adjustment steplessly 80 mm NC axis - diameter 50 mm 1 vertical profile milling unit on the right 3 grooving spindles working from above 1 grooved spindle working from below Pos 19 outfeed transport belt Pos 20 out feed transport system for putting off the work pieces Machine without processing tools. (techncial details according to manufacturer - without guarantee!)
            Tenoning spindle 3 St.
            Number of milling agregates 8 St.
            Spindle diameter 50 mm
            Description :
            Weinig UC-Matic window production line
            -----------------------------------------

            Weinig Powermat 500 + Weinig Unirex 2000 + Weinig Unicontrol 15

            ! Line can still be viewed in use!

            Consisting of:
            -----------------------------------------

            Pos 1: feed conveyor

            Pos. 2: Weinig Powermat 500

            Working width 230 mm, working height 120 mm,
            5 spindles + glazing bead saw:
            1. below, 7.5 kW, diameter 40 mm, 8,000 rpm
            2nd right, 7.5 kW, diameter 40 mm, 8,000 rpm
            3rd left, 11.0 kW, diameter 40 mm, 8,000 rpm
            4. above, 11.0 kW, PowerLock / HSK, 8,000 rpm
            5. below, 7.5 kW, PowerLock / HSK, 8,000 rpm
            6. Glass bead saw from above

            Pos. 3: longitudinal conveyor belt

            Pos. 4 and 5: Cross conveyor with transfer to Weinig Unicontrol 15

            Pos. 6: Weinig Unitech 15, tenon slot unit:
            1 stepless cross-cut saw with edge rounder from above
            1 edge rounding unit from below
            3 slotted spindles, each
            - 640 mm clamping length
            - Axial stepless adjustment with NC axis
            - diameter 50 mm
            - caster counter

            Pos. 7,8,9 transport system with turning device
            for 2nd run in Unitech 15

            Pos. 10 and 11 cross conveyor and longitudinal transport in grinding machine

            Pos 12: Stähle-Hess single wood grinder from above and below

            Pos. 12 A: outfeed conveyor belt

            Pos 13: Conveyor system in the drilling and milling center Weinig Unirex 2000

            Pos 13 A and Pos 14 Weinig Unirex 2000
            Drilling and milling center with various units for the
            horizontal and vertical machining of the workpieces

            Pos. 15, 16, 17: Cross conveyors and conveyor belts to Weinig Univar 12

            Pos 18: Longitudinal profiling machine Weinig Univar 12

            4 profile spindles, vertical right each
            - 400 mm clamping length
            - Axial adjustment steplessly 350 mm NC axis
            - Radial adjustment steplessly 80 mm NC axis
            - diameter 50 mm

            1 vertical profile milling unit on the right
            3 grooving spindles working from above
            1 grooved spindle working from below

            Pos 19 outfeed transport belt

            Pos 20 out feed transport system for putting off the work pieces

            Machine without processing tools.

            (techncial details according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6 CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2592 · Window production centre

          WEINIG - Unicontrol 6 CNC - - - WEINIG PC-NEXUS

          Technical details
          Tenoning spindle 1 1︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱Control WEINIG PC-NEXUS
          # 2592 Weinig Unicontrol 6 with NC spindles ---------------------------- Machine is currently being checked and processed. Technical data summary (please inquire about any additional accessories included) Pos. 1: cross-cut saw ---------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max .: 400 mm > Motor power: 3.0 kW > Radially pneumatically controlled adjustment path to 8 positions, e.g. for edge rounding from above > Laser guide light to detect the saw section Electronic length stop, mounted on the slitting table, included Positioning of the cross-cut saw integrated in the control. > Length 3500 mm Pos. 2: Tenoning and slotted spindle ---------------------------- > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max .: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle pneumatically controlled axially, 2 positions Rung guide consisting of: Guide ruler in the stop (area synchronous spindle), Rung support bar from above in the area of ??the profile milling unit, vertical right and profiling spindle. Pos. 5: Profile milling unit, horizontal above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max .: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Circulation device for tear-free circulation > Double part package > Return device for one-man operation: slat conveyor > Screen controls > Inclined window installation > Electronic angle display for sloping windows > Industrial PC, PC control / NEXUS > Including Weinig type production program Option: Used window tools The technical characteristics of this machine should match your ideas do not match, please contact us. Our A team with many years of experience will be happy to assist you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 1
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Control WEINIG PC-NEXUS
            Description :
            # 2592 Weinig Unicontrol 6 with NC spindles
            ----------------------------
            Machine is currently being checked and processed.

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: cross-cut saw
            ----------------------------
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max .: 400 mm
            > Motor power: 3.0 kW
            > Radially pneumatically controlled adjustment path to 8 positions,
            e.g. for edge rounding from above
            > Laser guide light to detect the saw section

            Electronic length stop, mounted on the slitting table, included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500 mm

            Pos. 2: Tenoning and slotted spindle
            ----------------------------
            > Number of tools: variable, stepless adjustment NC axis
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max .: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, stepless adjustment NC axis
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle pneumatically controlled axially, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area synchronous spindle),
            Rung support bar from above in the area of ??the profile milling unit, vertical
            right
            and profiling spindle.


            Pos. 5: Profile milling unit, horizontal above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment range 125 mm, 8 positions


            Pos. 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max .: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed bar clamping
            > Circulation device for tear-free circulation
            > Double part package
            > Return device for one-man operation: slat conveyor
            > Screen controls
            > Inclined window installation
            > Electronic angle display for sloping windows
            > Industrial PC, PC control / NEXUS
            > Including Weinig type production program

            Option:
            Used window tools


            The technical characteristics of this machine should match your ideas
            do not match, please contact us. Our
            A team with many years of experience will be happy to assist you with any
            adjustments
            or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre SCM Method K Super


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5718 · Window production centre

          SCM - Method K Super - - -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱
          SCM Method K Specifications max. Working length 2800 mm (using the attacks) min. Workpiece length 200 mm (bright tenon) min. Workpiece height 30 mm max. Workpiece height 140 mm Tenoning table speed 4.16 m / min Feed speed 3-15 m / min End cutting the first 4 kW motorized horizontal positioning via free programmable axis Speed 3000 r / min Saw blade diameter 400 mm, diameter 80 mm Dust extraction 120 mm Automatic motor brake Second belt driven pin-slot unit 7.5 kW Spindle diameter 50 mm Spindle clamping length 620 mm Spindle under table 575 mm Speed 3500 rev / min max. Tool diameter 320 mm upper bearing motorized vertical positioning via freely programmable axis automatic lock timber carrier automatic motor brake automatic star delta connection Dust extraction 2 x 160 mm 3 first profile spindle 5.5 kW right and left hand rotation (synchronous) Spindle diameter 50 mm Spindle clamping length 320 mm Spindle under table 265 mm Horizontalverstellweg 60 mm Spindle speed 6500 rev / min. Tool diameter min. / Max. 100/220 mm motorized vertical positioning via freely programmable axis Automatic motor brake Dust extraction 150 mm 4 second profile spindle 5.5 kW clockwise Spindle diameter 50 mm Spindle clamping length 320 mm Spindle under table 265 mm Horizontalverstellweg 60 mm Spindle speed 6500 rev / min. Tool diameter min. / Max. 100/220 mm motorized vertical positioning via freely programmable axis -Absaugstutzendurchmesser 150 mm -automatic engine brake 5 Getriebefräsaggregat 5.5 kW Spindle diameter 50 mm Spindle clamping length 160 mm Spindle stroke 100 mm Horizontal adjustment 60 mm Rotational speed 6500 rev / min. Tool diameter min. / Max. 100/200 mm Single stroke pneumatic control via programmable timed horizontal one control for milling insert for execution of not through grooves on CNC Dust extraction 150 mm Automatic motor brake 6 glazing beads-off saw 2.2 kW Sägewellendurchmesser 25 mm Saw blade diameter max. 220 mm Sägewellenaufspannlänge max. 22 mm Speed 5000 r / min. Extraction nozzle diameter 50 mm Automatic motor brake 7 motorized, adjustable roller feed closest roller spacing Motor power 1,1 kW CE-conformity Crosscut saw, tenoning part horizontally infinitely programmable Slot portion 620 mm spindle length, left-handed programmable vertical movement over ball screws motor PTO table movement automatically trailing Splintertree for all Slot tool positions Workholding for single / double wooden operation with automatic Pressure drop fuse precise swiveling PTO table +/- 0 - 60 ° extendable telescopic length stop with automatic Differenzmaßsteuerung, Working length 2800 mm programmable vertical movement on ball screw in position 2, 3 and 4 Horizontal positioning on manually programmable 4-position turret, operated from the front of the machine for position 3, 4 and 5 stepless roller feed, tiltable for easy tool change, with additional feed roller for Umfräsarbeiten and motorized height adjustment by scale Glazing bead cutting saw with pneumatic vertical positioning on manually adjustable 4-position turret Forced operation of the glazing bead with arrestor Use the Glashaltetrennsäge automatically controlled by cycle automatic synchronous immersion function of the first profile spindle for chip-free trimming around by sash Horizontal positioning on manually programmable 4-position turret of the To use machine front extendable support rail for large casement Getriebfräsaggregat with pneumatic horizontal positioning Use the Glasleistentrennsäge on automatic cycle of the machine program Vertical positioning to manually programmable 4-position turret CNC machine control programmable full electronics (PLC) type CONTROL 20 Motor protection switches for all motors Weight 3600 Kg optional Accessories 11 KW motor gain in Pos. 2, 3, 4 and 5 Differenzmaßprogrammierung over control automatic workpiece - Feedback Crank adjustment for angular windows electronic length stop with floppy drive Tenoning carriage extension Z - laser Ruler extension to 3900 mm pneumatic ruler option: Machine tools with IV 68/73 wood and wood-aluminum (. techn data according to manufacturer - without guarantee.!) Machine still be seen in use! Bj.98
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Description :
            SCM Method K

            Specifications
            max. Working length 2800 mm (using the attacks)
            min. Workpiece length 200 mm (bright tenon)
            min. Workpiece height 30 mm
            max. Workpiece height 140 mm
            Tenoning table speed 4.16 m / min
            Feed speed 3-15 m / min

            End cutting the first 4 kW
            motorized horizontal positioning via free programmable axis
            Speed 3000 r / min
            Saw blade diameter 400 mm, diameter 80 mm
            Dust extraction 120 mm
            Automatic motor brake

            Second belt driven pin-slot unit 7.5 kW
            Spindle diameter 50 mm
            Spindle clamping length 620 mm
            Spindle under table 575 mm
            Speed 3500 rev / min
            max. Tool diameter 320 mm
            upper bearing
            motorized vertical positioning via freely programmable axis
            automatic lock timber carrier
            automatic motor brake
            automatic star delta connection
            Dust extraction 2 x 160 mm

            3 first profile spindle 5.5 kW right and left hand rotation (synchronous)

            Spindle diameter 50 mm
            Spindle clamping length 320 mm
            Spindle under table 265 mm
            Horizontalverstellweg 60 mm
            Spindle speed 6500 rev / min.
            Tool diameter min. / Max. 100/220 mm
            motorized vertical positioning via freely programmable axis
            Automatic motor brake
            Dust extraction 150 mm

            4 second profile spindle 5.5 kW clockwise

            Spindle diameter 50 mm
            Spindle clamping length 320 mm
            Spindle under table 265 mm
            Horizontalverstellweg 60 mm
            Spindle speed 6500 rev / min.
            Tool diameter min. / Max. 100/220 mm
            motorized vertical positioning via freely programmable axis
            -Absaugstutzendurchmesser 150 mm
            -automatic engine brake

            5 Getriebefräsaggregat 5.5 kW
            Spindle diameter 50 mm
            Spindle clamping length 160 mm
            Spindle stroke 100 mm
            Horizontal adjustment 60 mm
            Rotational speed 6500 rev / min.
            Tool diameter min. / Max. 100/200 mm
            Single stroke pneumatic control via programmable
            timed horizontal one control for milling insert for execution of
            not through grooves on CNC
            Dust extraction 150 mm
            Automatic motor brake

            6 glazing beads-off saw 2.2 kW

            Sägewellendurchmesser 25 mm
            Saw blade diameter max. 220 mm
            Sägewellenaufspannlänge max. 22 mm
            Speed 5000 r / min.
            Extraction nozzle diameter 50 mm
            Automatic motor brake

            7 motorized, adjustable roller feed

            closest roller spacing
            Motor power 1,1 kW
            CE-conformity
            Crosscut saw, tenoning part horizontally
            infinitely programmable
            Slot portion 620 mm spindle length, left-handed
            programmable vertical movement over ball screws
            motor PTO table movement
            automatically trailing Splintertree for all
            Slot tool positions
            Workholding for single / double wooden operation with automatic
            Pressure drop fuse
            precise swiveling PTO table +/- 0 - 60 °
            extendable telescopic length stop with automatic Differenzmaßsteuerung,
            Working length 2800 mm
            programmable vertical movement on ball screw
            in position 2, 3 and 4
            Horizontal positioning on manually programmable
            4-position turret, operated from the front of the machine
            for position 3, 4 and 5
            stepless roller feed, tiltable for easy tool change, with
            additional feed roller for Umfräsarbeiten and motorized height adjustment
            by scale
            Glazing bead cutting saw with pneumatic vertical positioning on
            manually adjustable
            4-position turret
            Forced operation of the glazing bead with arrestor
            Use the Glashaltetrennsäge automatically
            controlled by cycle
            automatic synchronous immersion function of the first profile spindle for
            chip-free trimming around by sash
            Horizontal positioning on manually programmable 4-position turret of the
            To use machine front
            extendable support rail for large casement
            Getriebfräsaggregat with pneumatic horizontal positioning
            Use the Glasleistentrennsäge on automatic cycle of the
            machine program
            Vertical positioning to manually programmable 4-position turret
            CNC machine control programmable full
            electronics (PLC) type CONTROL 20
            Motor protection switches for all motors
            Weight 3600 Kg

            optional Accessories
            11 KW motor gain in Pos. 2, 3, 4 and 5
            Differenzmaßprogrammierung over control
            automatic workpiece - Feedback
            Crank adjustment for angular windows
            electronic length stop with floppy drive
            Tenoning carriage extension

            Z - laser

            Ruler extension to 3900 mm
            pneumatic ruler

            option:
            Machine tools with IV 68/73 wood and wood-aluminum

            (. techn data according to manufacturer - without guarantee.!)

            Machine still be seen in use! Bj.98
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          WEINIG - HABERKORN - SCM - GUBISCH -