Європейська мережа дилерів акціонерної техніки
Який пошуковий термін ви використали б для пошуку цієї машини?
Double Column Milling M/C - Gantry Type
TRIMILL VF3016
FLECKENSTEIN Werkzeugmaschinen GmbH
Sommerweg 15 · 63831 - Wiesen+49 (0) 6096 9706 0
+49 (0) 6096 9706 20
www.fleckenstein-machine.com
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| x-travel | 3.000 mm |
| y-travel | 1.600 mm |
| z-travel | 1.200 mm |
| control | HEIDENHAIN iTNC530 HSCI |
| B-axis (swivelling head) | +/- 100 ° |
| C-axis (milling head rotation axis) | +/- 240 ° |
| feed and rapid traverse | : |
| rapid feed Y,X,Z | 40.000 m/min |
| Rapid traverse B- and C-Axis | 50 rpm |
| Accelerations (X, Y and Z) | 4 m/s² |
| Machine table: | : |
| Clamping surface | 3.500 x 1.750 mm |
| T-slots | 27 x 22 mm H12 |
| T-slot - distance | 125 mm |
| max. workpiece load | 7.000 kg/m2 |
| Max. distance table to spindle nose | 1.356 mm |
| turning speed range: | 10- 24.000 min-1 |
| Drive power (S1/S6): | 42/50 KW |
| Torque (S1/S6): | 67/84 Nm |
| Tool bore | HSK-A 63 |
| tool magazin: | : |
| number of tools | 50 |
| tool holder | DIN 69873 HSK A63 |
| Max. Ø tool | 115 mm |
| max. tool-Ø adjacent slots free | 125 mm |
| max. tool length | 300 mm |
| max. tool weight | 12 kg |
| coolant equipment | : |
| tank capacity | 1.400 l |
| voltage | 3x 40 V 50 Hz |
| power requirement | 90 kVA |
| Required air-pressure | min 6 bar |
| Nominal fuse protection | 160 A |
| measurement, weight | : |
| weight of the machine ca. | 58.000 kg |
| Machine main dimensions | 8,6 x 5,9 x 5,2 m |
Videos
Keine Video-Dateien vorhandenAdditional information
Equipment / Accessories
• 5-axis vertical portal milling machine in Gantry design.
• Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63
• Manually operated textile roof
• Tool changer chain 50-fold, change orientation vertical
• 3D probe for workpiece measurement
• Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process.
Alarm triggering, feed rate reduction or machine stop are carried out via the control system
• HEIDENHAIN HR550 handwheel (wireless)
• BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used
• Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS)
• TRIMILL Kinematics - application for rotary axes
• TRIMILL Teleservice - remote support
• Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm
• Hydraulic power unit
• 1 lubrication unit for the machine
• 1 lubrication unit for the milling spindle
• 1 cooling unit for cooling the milling head
• 1 cooling unit for cooling the axis motors
• 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h
• 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm
program hours on the machine: approx. 8.000h
• 5-axis vertical portal milling machine in Gantry design.
• Fork milling head T21C for simultaneous milling operation with FISCHER spindle, 42kW, 67Nm, 24.000 rpm, HSK-A63
• Manually operated textile roof
• Tool changer chain 50-fold, change orientation vertical
• 3D probe for workpiece measurement
• Process monitoring system MONTRONIX incl. installed vibration sensors for detection of abnormal vibrations during the machining process.
Alarm triggering, feed rate reduction or machine stop are carried out via the control system
• HEIDENHAIN HR550 handwheel (wireless)
• BLUM LaserControl NT for non-contact tool measurement with automatic cover, enables increased process reliability through automatic form and wear control of the tools used
• Coolant system KNOLL for cooling lubrication with supply via spray nozzles and supply through the main spindle (ICS)
• TRIMILL Kinematics - application for rotary axes
• TRIMILL Teleservice - remote support
• Linear, absolute and direct path measuring systems make HEIDENHAIN in X, Y and Z axis with a resolution of 0,001mm
• Hydraulic power unit
• 1 lubrication unit for the machine
• 1 lubrication unit for the milling spindle
• 1 cooling unit for cooling the milling head
• 1 cooling unit for cooling the axis motors
• 1 pc. Air extraction unit for oil and cooling lubricant emulsion with three-stage filtering, power consumption 2.2 kW, max. extraction capacity 2,000 m³. Extraction capacity 2.000 m³/h
• 2 scraper belt conveyors, positioned along the X-axis to the left and right of the machine table, discharge height approx. 1,050mm
program hours on the machine: approx. 8.000h
On this page you will find a an offer on a used Double Column Milling M/C - Gantry Type of type VF3016 of the company TRIMILL with year of construction 2017 and with stock no.: 1118-1620. The machine is manufactured by the company FLECKENSTEIN Werkzeugmaschinen GmbH from 63831 Wiesen offered. The delivery time / delivery status for this machine is: short time For more information, please refer to the details listed.
Документи та відео
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
Double Column Milling M/C - Gantry Type
