Європейська мережа дилерів акціонерної техніки
Який пошуковий термін ви використали б для пошуку цієї машини?
Planer-Type Milling M/C - Double Column
WALDRICH SIEGEN POWERTEC 4000 AP
Goedicke Werkzeugmaschinenhandels GmbH
Heinz-Nixdorf-Str. 2 · 74172 - Neckarsulm+49-(0) 7132–999 360
+49-(0) 7132–999 3690
www.goedicke.com
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| x-travel | 14000 mm |
| y-travel | 5000 mm |
| z-travel | 1500 mm |
| Controls | SIEMENS 840 C |
| WORKING RANGE -MILLING- | . |
| - x-axis traverse | 14000 mm |
| - y-axis traverse | 5000 mm |
| - z-axis traverse | 1500 mm |
| - w-axis traverse | 3000 mm |
| PORTAL / BRIDGE | . |
| - Passage height | 4500 mm |
| - distance between columns | 4000 mm |
| TABLE | . |
| - clamping surface (left-right) | 9000 mm |
| - clamping surface (front-back) | 3000 mm |
| - workpiece load (max) | 100000 kg |
| WORKING SPINDLE / HEAD | . |
| - spindle type : vertical | . |
| - spindle revolutions (min) | 2 /min |
| - spindle revolutions (max) | 2500 /min |
| - number of gears | 2 |
| - spindle diameter | 200 mm |
| - taper fixture : ISO SK 50 | . |
| - drive power (max) | 113 kW |
| - spindle power (continuous) | 106 kW |
| - torque (max.) | 9500 Nm |
| AXIS DRIVES | . |
| - traverse velocity x (min) | 1 mm/min |
| - traverse velocity x (max) | 10000 mm/min |
| - traverse velocity y (min) | 1 mm/min |
| - traverse velocity y (max) | 10000 mm/min |
| - traverse velocity z (min) | 1 mm/min |
| - traverse velocity z (max) | 10000 mm/min |
| - feed velocity w (min) | 1 mm/min |
| - feed velocity w (max) | 2000 mm/min |
| - rapid traverse x | 20000 mm/min |
| - rapid traverse y | 20000 mm/min |
| - rapid traverse z | 20000 mm/min |
| - rapid traverse w | 2000 mm/min |
| ELECTRICAL SPECIFICATIONS | . |
| - mains voltage | 400 V |
| - mains frequency | 50 Hz |
| DIMENSIONS / WEIGHTS | . |
| - height above floor level | 8590 mm |
| - total weight approx. | 360000 kg |
| ATTACHMENTS | . |
| - angular milling head : yes | . |
| - autom. tool clamping : yes | . |
| - ball spindles : yes | . |
| - guideway covers : yes | . |
| - coolant unit : yes | . |
| - high pressure cooling syst. (through spindle) | . |
| - closed cabin : yes | . |
| - chip conveyor : yes | . |
Videos
Keine Video-Dateien vorhandenAdditional information
Technical description :
PLANER TYPE MACHINING CENTER – EACH WITH 3 PALLETS 9000 x 3000 mm:
- Tool changer with 420 tools
- Head pick-up system
- Video monitoring via camera
- High pressure lubrication unit for inner cooling 70bar
AVAILABLE HEAD UNITS:
- Fixed angle head HS800C600 105 Kw 600 long
- Fixed angle head HSD350C850 50 Kw 850 long
- Fixed angle head HSD 40C880 12 Kw 880 long
- Fixed angle head HSD 190C1000 30 Kw 1000 long
- Vertical spindle unit VS800C 105 Kw 900 long
- Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
- Angle spindle unit SO800C905 - 22,5° fix
- Angle spindle unit HSE1200CS -25° fix
- Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth
One additional drilling extension SE 350C plus 1 SE500C.
Description of condition :
In 2011/2012 these 2 identical machines were retrofitted and rebuilt by WALDRICH COBURG.
The milling length was extended to 14meters and an automatic changing system for table pallets was installed.
Both machines can be seen under power by prior appointment.
VIDEO: https://youtu.be/1QQV0A5vzf0
PLANER TYPE MACHINING CENTER – EACH WITH 3 PALLETS 9000 x 3000 mm:
- Tool changer with 420 tools
- Head pick-up system
- Video monitoring via camera
- High pressure lubrication unit for inner cooling 70bar
AVAILABLE HEAD UNITS:
- Fixed angle head HS800C600 105 Kw 600 long
- Fixed angle head HSD350C850 50 Kw 850 long
- Fixed angle head HSD 40C880 12 Kw 880 long
- Fixed angle head HSD 190C1000 30 Kw 1000 long
- Vertical spindle unit VS800C 105 Kw 900 long
- Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time
- Angle spindle unit SO800C905 - 22,5° fix
- Angle spindle unit HSE1200CS -25° fix
- Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth
One additional drilling extension SE 350C plus 1 SE500C.
Description of condition :
In 2011/2012 these 2 identical machines were retrofitted and rebuilt by WALDRICH COBURG.
The milling length was extended to 14meters and an automatic changing system for table pallets was installed.
Both machines can be seen under power by prior appointment.
VIDEO: https://youtu.be/1QQV0A5vzf0
On this page you will find a an offer on a used Planer-Type Milling M/C - Double Column of type POWERTEC 4000 AP of the company WALDRICH SIEGEN with year of construction 1995 and with stock no.: 1048-739559. The machine is manufactured by the company Goedicke Werkzeugmaschinenhandels GmbH from 74172 Neckarsulm offered. The delivery time / delivery status for this machine is: immediate For more information, please refer to the details listed.
Документи та відео
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
Planer-Type Milling M/C - Double Column
