Roller leveller

Material Width 1.000 mm︱Material Thickness 0,50 - 3,00 mm︱No. Levelling Rolls 21 ︱leveling roll diameter app. 30 mm︱distance between stands 1.050 mm︱total power requirement 13 kW︱speed app. 14 m/min︱Machine Weight app. 7,0 t︱Required Space app. 2,70x2,40x2,20 m︱

---

6HI LEVELER - drive motor 7,50 kW - working direction: right - left - leveling roll needle bearings - intermediate rolls - rolling mill adjustment vertically 12 mm - rolling mill adjustment motor driven - measuring device digital - measuring display metric - conveyor belt at infeed and run out side - quick change device hydraulically - cicrculating oil lubrication of leveling roll bearing rails and drive shafts - SIEMENS S5 PLC control - LENZE frequency converter - drive motor = brake motor The leveler is under power and can be tested with clean material.

Material Width 1.250 mm︱Material Thickness 0,80 - 20,0 mm︱No. Levelling Rolls 19 ︱leveling roll diameter app. 80 mm︱Required Space app. m︱Machine Weight app. t︱

---

PART LEVELER infeed height app. 1.000 mm connection power 81 kW speed 2 - 20 m/min. roller conveyors (each on infeed and run out side) app. 1.800 mm (driven) dimensions: part leveler: app. 2.800 x 1.850 x 2.120 mm (without roller conveyor) control cabinet: app. 1.000 x 400 x 1.900 mm hydraulic unit: app. 2.400 x 1.250 x 1.800 mm

Material Width 1.550 mm︱Material Thickness 0,60-2,50/1,9+0,6 mm︱No. Levelling Rolls 21 ︱Levelling Roll Diameter 49,46 mm︱total power requirement 29 kW︱speed app. 9,3/18,6 m/min︱Required Space app. 5,1x1,6x2,25 m︱Machine Weight app. 11 t︱

---

technical details: leveling roll length 1.775 mm no. – supports 14 (7 x above / 7 x below) no. – support rolls (flat – above / with groove – below) 161 height adjustment electro motive (power 2,2 kW) tilting adjustment electro motive (power 1,30 kW) support roll adjustment electro motive (power 7 x 0,55 kW) main motor – power 18,5 / 22 kW acessories: infeed- and run out table L x W x H 3,70 x 2,10 x 0.90 mtr., weight approx.. 300 kg L x W x H 2,80 x 1,60 x 0,85 mtr., weight approx.. 200 kg roller removal device L x W x H 2,40 x 0,40 x 0,40 mtr. control panel with mounting frame L x W x H 1,20 x 0,40 x 2,10 mtr., weight 150 kg spare parts: 1 wooden box with 11 Spare Rolls and some Parts L x W x H 2,20 x 0,60 x 0,40 mtr. machine description: infeed and outfeed table roller removal device control panel attached to the straightener switch cabinet box with 10 spare straightening rollers with a diameter of 49.46 mm bottom crowning electromotive electromotive height adjustment electromotive swivel / tilting device reversible

Material Width 1.650 mm︱Material Thickness 0,50-2,00 mm︱No. Levelling Rolls 23 ︱Levelling Roll Diameter 53,6 mm︱distance between stands 1.750 mm︱length of rolls 1.820 mm︱total power requirement 58 kW︱speed app. m/min︱Required Space app. 6,00x3,00x2,90 m︱Machine Weight app. 19,60 t︱

---

daylight width (distance between stands) app. 1.750 mm no. - support blocks 14 (7 x above / 7 x below) with support rolls no. - support rolls 175 (84 x above / 91 x below) support roll – Ø app. 112 mm power – main motor 55 kW height adjustment motor driven tilting adjustment motor driven support block adjustment (below) mechanically/manually and individually adjustable 1 set leveling rolls (spare part) Ø 53,68 mm central grease lubrication of bearing rails circulating oil lubrication of drive and drive shafts control unit - not available all motors: main motor (NEW), swivel motor, motor for height adjustment and oil pump are provisionally equipped with a connection cable. For the swivel motor and motor for height adjustment a 24 V transformer is needed - for the brake.

Material Width 400 mm︱Material Thickness 0,40 - 4,00 mm︱No. Levelling Rolls 17 ︱leveling roll diameter app. 68 (69) mm︱distance between stands 580 mm︱total power requirement 20 kW︱Required Space app. m︱Machine Weight app. t︱

---

LEVELER WITH DRIVE adjustment: mechanically tilting: mechanically support: 1 x mechanically number - support rolls: 18 ( 9 x above / 9 x below) support roll diameter: 130 mm pneumatical ventible length measuring roll mounted on frame construction electrical drive power: 20 kW accessories: toggle lever shear as cut to length shear knife length: 670 mm control cabinet control element mounted on frame construction