Steelprocessing-drilling-burning-notching

---

Beam coping robot in very good condition ! Equipped with plasma cutting unit Hypertherm HPR 260. KUKA robot control with 7 axes CNC control (6 robot axes and 1 portal axis) The infeed roller-type conveyor with cross transport is 12 m long and the outfeed side with cross transport is 8 m long. Transport system T 13 Fast material cross transport Material stock in heavy-duty steel construction Sliding rails of synthetic material (polyamide) for low-noise material cross transport Drag chains with transport claws Drive system with continuously-variable frequency-controlled gear motor Measuring system for Coping Robot on the feed side, M 158 G sliding measuring carriage with gripper Material size: Width x height 1200 x 450 mm Bevel angle max. ca. 45 deg. In 2008 the complete machine cost new (incl. conveyors)520.000 Euro.

---

Beam coping robot in very good condition ! Equipped with plasma cutting unit Hypertherm HPR 260. KUKA robot control with 7 axes CNC control (6 robot axes and 1 portal axis) The infeed roller-type conveyor with cross transport is 12 m long and the outfeed side with cross transport is 8 m long. Transport system T 13 Fast material cross transport Material stock in heavy-duty steel construction Sliding rails of synthetic material (polyamide) for low-noise material cross transport Drag chains with transport claws Drive system with continuously-variable frequency-controlled gear motor Measuring system for Coping Robot on the feed side, M 158 G sliding measuring carriage with gripper Material size: Width x height 1200 x 450 mm Bevel angle max. ca. 45 deg. In 2008 the complete machine cost new (incl. conveyors)520.000 Euro.

size of profile - max. 150 mm︱Number of drilling agregates 1 Stk.︱bore diameter 35 mm︱quill stroke 140 mm︱spindle taper MK 4 ︱column diameter 120 mm︱throat 300 mm︱distance spindlenose - table min./max. 50 / 600 mm︱spindle turning speed range 14 / 45 - 1650 U/min︱impact length 2000 mm︱base plate 420 x 420 mm︱air consumption 6 bar︱total power requirement 1,5 kW︱weight of the machine ca. 400 kg︱dimensions of the machine ca. ca. 2,5 x 0,7 x 2 m︱Cooling equipment ︱Electric 400 Volt ︱

---

---

size of profile - max. 150 mm︱Number of drilling agregates 1 Stk.︱bore diameter 35 mm︱quill stroke 140 mm︱spindle taper MK 4 ︱column diameter 120 mm︱throat 300 mm︱distance spindlenose - table min./max. 50 / 600 mm︱spindle turning speed range 14 / 45 - 1650 U/min︱impact length 3000 mm︱base plate 420 x 420 mm︱Max. speed ot the feeder 200 mm/sec.︱positioning accuracy auf 3 m +/- 0,2 mm︱air consumption 6 bar︱boring motor 1,5 kW︱Carrying capacity feeder 45 kg︱Control ︱weight of the machine ca. 500 kg︱dimensions of the machine ca. ca. 2,5 x 0,7 x 2 m︱Electric 400 Volt ︱

---

Controlled SERIES DRILLING MACHINE used very little with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe and profile material. The machine drills automatically holes in the programmed intervals only in a fixed line. The material is clamped with a quick - tensioner (aluminium) on the feed unit. The pneum. vice fixes the workpiece during the drilling phase. The automatic drilling machine drills the hole with autom. feed, the vise solves pneumatically and the it moves to the next memory stored position, the vise clamps and the next cycle begins. The vise can also work outside the center position. Die control with alphanumeric grafic display stores 99 programs with 99 different hole intervals , 99 times repeatable. Max. feed 200 mm / sec. - Individually programmable. Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically used. The feeder is available in various lengths up to 6 m. The speed of the feed material , the drilling feed , the depth and the speed of the drill spindle can be adjusted as needed. Due to the user ceasing production, the machine became available just 1.5 years after the new purchase. We then bought the machine and put in our hall as an exhibition piece. Since then the machine has run for perhaps an hour for demonstration purposes. So overall it has barely been used. Machine dealer with own stock of 1600 m².

---

Controlled SERIES DRILLING MACHINE with 3 automatic spindel feeds in conjunction with the automatic speedy feed system suitable for pipe and profile material. The machine drills automatically holes in the programmed intervals only in a fixed line. The material is clamped with a quick - tensioner (aluminium) on the feed unit. The pneum. vice fixes the workpiece during the drilling phase. The automatic drilling machine drills the hole with autom. feed, the vise solves pneumatically and the it moves to the next memory stored position, the vise clamps and the next cycle begins. The vise can also work outside the center position. Die control with alphanumeric grafic display stores 99 programs with 99 different hole intervals , 99 times repeatable. Max. feed 200 mm / sec. - Individually programmable. Accuracy / - 0.2 mm. The machine can also be manually and semi-automatically used. The feeder is available in various lengths up to 6 m. The speed of the feed material , the drilling feed , the depth and the speed of the drill spindle can be adjusted as needed.

---

New drilling machine with aut. spindle feeds in connection with an autom. feed system "Speedy" suitable for pipes or profiles. Drills automatically holes in the various programmed intervals in different lines with a single movable drill head - 2 controlled axes x + y, i. Length stop and drill head transversely. The material is clamped to the feed unit (made of aluminum) by means of a quick-clamping attached. The pneum. vise fixes the workpiece during the drilling phase. The machine drills with its autom. feed the hole, then move further in y-direction and drills the following holes, then the vise releases pneumatically and the feed moves to the next stored position, then clamps the vice again and the next cycle begins. The vise can be adjusted - readable via mm-scale. The MAX 12 control with alphanumeric grafic display stores 99 Programs with 99 different hole spacings, 99 times repeatable, USB interface. The speed of the material feed, the drilling feed, the drilling depth and the rotational speeds of the drill spindle are adjustable as needed. The x + y axis are equipped with a brushless motor. Necessary packaging Special accessories on request: Speed adjustment via inverter, max. Speed 2200 rpm. Special clamping device for drilling at the workpiece end with at least 35 mm. Roller for material, height adjustable. It is neccesary to send to the manufacturer profiles for testing purposes. The special drilling machines can also be equipped with 2 drill heads, or horizontal / vertical heads. Machine dealer with own stock of 1600 m².

---

New drilling machine with aut. spindle feeds in connection with an autom. feed system "Speedy" suitable for pipes or profiles. Drills automatically holes in the various programmed intervals in different lines with two movable drill heads - 2 controlled axes x + y, i. Length stop and drill head transversely. The material is clamped to the feed unit (made of aluminum) by means of a quick-clamping attached. The pneum. vise fixes the workpiece during the drilling phase. The machine drills with its autom. feed the holes, then move further in y-direction and drills the following holes, then the vise releases pneumatically and the feed moves to the next stored position, then clamps the vice again and the next cycle begins. The vise can be adjusted - readable via mm-scale. The MAX 12 control with alphanumeric grafic display stores 99 Programs with 99 different hole spacings, 99 times repeatable, USB interface. The speed of the material feed, the drilling feed, the drilling depth and the rotational speeds of the drill spindle are adjustable as needed. The x + y axis are equipped with a brushless motor. Necessary packaging Special accessories on request: Speed adjustment via inverter, max. Speed 2200 rpm. Special clamping device for drilling at the workpiece end with at least 35 mm. Roller for material, height adjustable. It is neccesary to send to the manufacturer profiles for testing purposes. The special drilling machines can also be equipped with 2 drill heads, or horizontal / vertical heads. Machine dealer with own stock of 1600 m².

---

---