'
Європейська мережа дилерів акціонерної техніки
+ 49 (0) 2389 5299080
Пошукова служба Продаємо старі машини

Bitte einen Suchbegriff eingeben - Будь ласка, введіть пошуковий термін
Категорія:
    Виробник:
      машини:
        Трейдер:
             вид: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2022

          Rubber processing

          Machinelist: Rubber processing

          Plants, complete

          used Rubber processing Plants, complete ITW Mima Oktopus Junior

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G181101 · Plants, complete

          ITW Mima - Oktopus Junior - - 2004 -

          Technical details
          used Rubber processing Plants, complete Berstorff Mikrowellen/Heissluft Kanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220101 · Plants, complete

          Berstorff - Mikrowellen/Heissluft Kanal - - 1996 -

          Technical details
          Condition: used - in production until approx. middle of February 2022 Specification: microwave vulcanizing line hot air channel with microwave Conversion to S7 control, 2015 - microwave vulcanizing line: MW24/HL 12x2/KK09/RA - Type: MW 24.1-200.075 - Channel length microwave approx.: 17.170 mm - Microwave feed: Number of HF generators: 4 Power per HF generator: max. 6 kW power setting: 0 / 10 - 100% Frequency of the HF generators: 2450 - 2470 MHz - channel length hot air approx.: 26.170 mm - Air heating: Number of heating zones: 3 Power per heating zone: 9,9 kW Heating zones gas heated channel air temperature max.: 250°C at the injection point - Cooling basin length approx.: 15,000 mm - belt width: 105 to 200 mm, per station - Transpot belt height approx.: 1,100 mm - number of belts: 1 - transport speed: 1 - 30 m/min - Voltage: 3 x 400 V, 50 Hz - Control voltage: 230 V, 50 Hz/ 24 V DC - Material running direction: from right to left - Conversion to Siemens S7 control was made in 2015 Documentation in German language available. plant will be available from approx. kW 7/2022. A second identical system will be available from kW 11/2022, but with the material material flow direction from left to right. In this second the control panel is defective. However, it can be repaired at Siemens.
            Description :
            Condition: used - in production
            until approx. middle of February 2022

            Specification: microwave vulcanizing line
            hot air channel with microwave
            Conversion to S7 control, 2015

            - microwave vulcanizing line: MW24/HL 12x2/KK09/RA
            - Type: MW 24.1-200.075
            - Channel length microwave approx.: 17.170 mm
            - Microwave feed:
            Number of HF generators: 4
            Power per HF generator: max. 6 kW
            power setting: 0 / 10 - 100%
            Frequency of the HF generators: 2450 - 2470 MHz
            - channel length hot air approx.: 26.170 mm
            - Air heating:
            Number of heating zones: 3
            Power per heating zone: 9,9 kW
            Heating zones gas heated
            channel air temperature max.: 250°C at the injection point
            - Cooling basin length approx.: 15,000 mm
            - belt width: 105 to 200 mm, per station
            - Transpot belt height approx.: 1,100 mm
            - number of belts: 1
            - transport speed: 1 - 30 m/min
            - Voltage: 3 x 400 V, 50 Hz
            - Control voltage: 230 V, 50 Hz/ 24 V DC
            - Material running direction: from right to left
            - Conversion to Siemens S7 control was made in 2015

            Documentation in German language available.

            plant will be available from approx. kW 7/2022. A second
            identical system will be available from kW 11/2022, but with the material
            material flow direction from left to right. In this second
            the control panel is defective.
            However, it can be repaired at Siemens.

          used Rubber processing Plants, complete Berstorff Compoundieranlage ZE 40 A

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210301 · Plants, complete

          Berstorff Compoundieranlage - ZE 40 A - - 1993 - 2004 -

          Technical details
          Condition: used Specification: compounding plant with underwater pelletising system and drying system second-hand - consisting of: Pos 1, extruder system - Berstorff ZE 40 A - year of construction: 1993 - screw diameter: 43 mm - segmented screw and barrel - length: 1 screw pair each - L/D 33,5 - L/D 39,5 - Screw speed max.: 500 rpm - Screw torque: 400 Nm - DC motor with tachogenerator - Drive power: 42 kW - Rated speed: 2,500 rpm - Electrical connection: 340/460 V - Motor was completely overhauled in 2015 - Control: Siemens S7-300 was completely reprogrammed - New cylinder still available: 2 pcs. 6D-cylinder with cooling; 1 pc. 1,5D-intermediate plate - 1 side feeder (screw diameter 34 mm) - Seitenbeschickung fahrbar - various strand nozzle heads - Visualisation: WinCC Pos 2, underwater pelletising system - Make Gala Model 6 - Year of manufacture: 2001 - speed: 500 to 3.600 rpm - additional, overhauled motor Pos 3, Dryer system: - Make Econ Type: EWT 250 - year of construction: 2015 - incl. pipe system Pos 4, screen changing and starting device: - Make: Trendelkamp, Type: TASD 4L - Year of construction: 2004 - Filter inserts: 1 - Filter area: 110 cm² - Extrusion capacity approx.: 180 - 500 kg/h - Heating capacity: 4x 1.000 W - Hydraulic power: 7,5 kW - Delivery volume: 3,6 l/min - Condition of bolts: several grooves Pos 5, dosing (gravimetric) - Make: K-Tron - Year of construction: 2001 - 2 dosing units: Type: K2-ML-S60 (single screw) Type K2-ML-T35 (double screw) - hanging system - Control unit: 2x KSU (control of the feeders via extruder display possible) Pos 6, System control/visualisation
            Description :
            Condition: used

            Specification: compounding plant with underwater pelletising system
            and drying system
            second-hand - consisting of:

            Pos 1, extruder system
            - Berstorff ZE 40 A
            - year of construction: 1993
            - screw diameter: 43 mm
            - segmented screw and barrel
            - length: 1 screw pair each
            - L/D 33,5
            - L/D 39,5
            - Screw speed max.: 500 rpm
            - Screw torque: 400 Nm
            - DC motor with tachogenerator
            - Drive power: 42 kW
            - Rated speed: 2,500 rpm
            - Electrical connection: 340/460 V
            - Motor was completely overhauled in 2015
            - Control: Siemens S7-300
            was completely reprogrammed
            - New cylinder still available: 2 pcs. 6D-cylinder with cooling;
            1 pc. 1,5D-intermediate plate
            - 1 side feeder (screw diameter 34 mm)
            - Seitenbeschickung fahrbar
            - various strand nozzle heads
            - Visualisation: WinCC

            Pos 2, underwater pelletising system
            - Make Gala Model 6
            - Year of manufacture: 2001
            - speed: 500 to 3.600 rpm
            - additional, overhauled motor

            Pos 3, Dryer system:
            - Make Econ Type: EWT 250
            - year of construction: 2015
            - incl. pipe system

            Pos 4, screen changing and starting device:
            - Make: Trendelkamp, Type: TASD 4L
            - Year of construction: 2004
            - Filter inserts: 1
            - Filter area: 110 cm²
            - Extrusion capacity approx.: 180 - 500 kg/h
            - Heating capacity: 4x 1.000 W
            - Hydraulic power: 7,5 kW
            - Delivery volume: 3,6 l/min
            - Condition of bolts: several grooves

            Pos 5, dosing (gravimetric)
            - Make: K-Tron
            - Year of construction: 2001
            - 2 dosing units:
            Type: K2-ML-S60 (single screw)
            Type K2-ML-T35 (double screw)
            - hanging system
            - Control unit: 2x KSU
            (control of the feeders via extruder display possible)



            Pos 6, System control/visualisation

          used Rubber processing Plants, complete GERLACH 3-Etagen Heizkanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G180201 · Plants, complete

          GERLACH - 3-Etagen Heizkanal - - n.b. -

          Technical details
          used Rubber processing Plants, complete GERLACH Heizkanal HLK 150-1-110-12m

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210601 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

          used Rubber processing Plants, complete GERLACH Heizkanal HLK 150-1-110-12m

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220402 · Plants, complete

          GERLACH - Heizkanal HLK 150-1-110-12m - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 170 kW︱
          Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 170 kW
            Description :
            Condition: used,

            Specification: 12m heating duct incl. PCT

            - length approx.: 12.000 mm
            - extrusion height: 1.100 mm
            - extrusion direction: from right to left
            - belt width: 150 mm
            - Channel width: 190 mm
            - At the inlet and outlet there is a 50 kW burner each
            - In the PCT there is a 70 kW burner
            - Temperature range: 240°C to 340°C
            - Heating: gas heated
            - Belt speed: 2-40 m/min
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.

          used Rubber processing Plants, complete GERLACH Nachheizkanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210603 · Plants, complete

          GERLACH - Nachheizkanal - - 1989 -

          Technical details
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Heating: gas heated - Control system: Siemens - The channel was extended by 2x 3m segments in 2016 - The burners were renewed in 2016
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Heating: gas heated
            - Control system: Siemens
            - The channel was extended by 2x 3m segments in 2016
            - The burners were renewed in 2016

          used Rubber processing Plants, complete GERLACH Nachheizkanal

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220403 · Plants, complete

          GERLACH - Nachheizkanal - - 1989/2015 -

          Technical details
          machine measurements Länge ca. 21.000 mm︱machine weight -- kg︱power capacity 200 kW︱
          Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015
            machine measurements Länge ca. 21.000 mm
            machine weight -- kg
            power capacity 200 kW
            Description :
            Condition: used,

            Specification: 21m post-heating duct with heat exchanger

            - length approx.: 21.000 mm
            - consisting of: 21.000 mm heating channel, incl. heat exchanger
            - extrusion height: 1.100 mm
            - Extrusion direction: from right to left
            - 4x burners with 50kW burner each
            - Tempering range: 240°C - 340°C
            - Heating: gas heated
            - Control system: Siemens

            Heating duct extension by 2x 3m, 2015
            - The duct was extended by 2x 3m segments in 2016
            - The burners of the 21,000 mm system were renewed in 2015

          used Rubber processing Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G210602 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

          used Rubber processing Plants, complete GERLACH SHF-Kanal, Schockmodul + UHF

          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland
          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220401 · Plants, complete

          GERLACH - SHF-Kanal, Schockmodul + UHF - - 2003 -

          Technical details
          machine measurements Länge ca. 12.000 mm︱machine weight -- kg︱power capacity 182 kW︱
          Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022.
            machine measurements Länge ca. 12.000 mm
            machine weight -- kg
            power capacity 182 kW
            Description :
            Condition: used,

            Specification: heating channel + shock module incl. UHF and PCT
            Typ: SHF 150-120-1-147-12

            - length approx.: 12.000 mm
            - Consisting of: 9.000 mm hot air channel, incl. UHF
            3.000 mm shock module
            with folding infeed conveyor and PCT
            - UHF power: 4x 3 kW
            - Temperature range UHF part: 240°C - 340°C
            - Temperature range shock module: 240°C - 500°C
            - Shock module with non-driven metal rollers
            - Extrusion height: 1,100 mm
            - Extrusion direction: from right to left
            - At the infeed and outfeed one 50 kW burner each
            - PCT burner capacity: 70 kW
            - Heating: gas heated
            - Control: Siemens S7

            Relocation date no later than mid-June 2022.

          •   
          •   
          • 1  
            •

            Профіль торговця: Markus Hirsch GmbH

          Зв'язатися з трейдером



            Маркус Хірш ГмбХ
           Hüttenstrasse 1
            46284 - Дорстен
            Німеччина
            + 49 2362 95035 12 "> + 49 2362 95035 12
            +49 2362 95035 10
            liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de

          Профіль Трейдера

          О компании


          Markus Hirsch GmbH є всесвітньо діючою компанією, яка регулярно виступає на міжнародних виставках, пропонуючи рішення для дилерів, промислових підприємств, адміністраторів неплатоспроможності, будівельних компаній та агрохолдингів.

          Наші послуги, що стосуються роботи з верстатами та металоконструкціями, включають: власну торгівлю з більш ніж 300 власними верстатами на складі, маркетинг, оренда та зберігання, доставка та упаковка, розбирання та монтаж, забезпечення людськими ресурсами та металоконструкції.

          У сільському господарстві ми пропонуємо наступні послуги: розкидання сечовини, пакування сіна та соломи в квадратних та круглих тюках, силосне намотування квадратних та круглих тюків, оранка з чотирьома рядними плугами та лугове перетягування.

          Ми пропонуємо більше послуг за запитом. Markus Hirsch GmbH переконує, коли мова йде про планування, точність і ціну.

          Маркус Хірш ГмбХ
          Niersweg 84
          47877 Вілліх-Нерсен
          Німеччина

          Тел .: + 49 (0) 2156 - 49894 0
          Факс: + 49 (0) 2156 - 49894 10
          Ел. пошта:  hirsch@hirsch-maschinen.de



          TOP Manufacturer:

          ENGEL - DEMAG - ARBURG - COMERIO ERCOLE - HANS VON DER HEYDE - TROESTER - ITAL - MECCANICHE MODERNE - ALPHA TECHNOLOGIES - DESMA -

          Markus Hirsch GmbH 46284 - Dorsten Hüttenstrasse 1 Deutschland
          Markus Hirsch GmbH

          Hüttenstrasse 1



          Contact Trader


            Markus Hirsch GmbH
           Hüttenstrasse 1
            46284 - Dorsten
            Deutschland
            +49 2362 95035 12
            +49 2362 95035 10
            liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
            Contact person:
           

          Trader Profile



          Machine category


          · · Abkantpresse - hydraulisch · Absaugung · Abwälzfräser · Anhänger · Anlage · Anreißplatte · Anzugsbolzen · Arbeitstisch · Aufnahme · Aufspannplatte · Aufspanntisch · Aufspannwinkel · Aufspannwürfel · Autokran · Bandanlage · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Bearbeitungszentrum · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Behälterdrehvorrichtung · Bettfräsmaschine - Horizontal · Bettfräsmaschine - Universal · Bettfräsmaschine - Vertikal · Blockbandsäge · Bodenwaage · Bohrerschleifmaschine · Bohrhämmer · Bohrstange · Bohrwerkstisch · Bohrwürfeltisch · Brennschneidemaschine · Brückenlaufkran - Einträger · Brückenlaufkran - Zweiträger · Bügelsäge · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerziehpresse - Hydraulisch · Dornrohrbiegemaschine · Dreh-,Schwenk-, und Kipptisch · Drehbarer Aufspanntisch · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Edelstahl-Druck-Behälter · Einspindel - Stangenautomat · Einspindelstangenautomat · Einständerpresse - Hydraulisch · Elektro - Hubwagen · Entstauber · Ersatzteile · Exzenterpresse - Einständer · Fahrständerfräsmaschine · Filteranlage · Flachschleifmaschine · Flachschleifmaschine - Vertikal · Friktionsspindelpresse - Zweiständer · Fräs- und Drehwerkzeuge · Fräskopf senkrecht · Fräsmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Futter · Führungsbahnschleifmaschine - Doppelst. · Gabelstapler - Diesel · Gabelstapler - Elektro · Gabelstapler - Gas · Gießanlagen · Glattwalzmaschine · Großdrehbank · Grubber · Handhabungsgerät · Haspel · Hebezange - Greifer · Hohlspindeldrehmaschine · Honmaschine - handbetätigt · Honmaschine - Innen - Horizontal · Hydraulikaggregat · Härteofen · Kalander · Kaltkammerdruckgußmaschine - Horizontal · Kaltkreissäge - Automatik · Kaltkreissäge - Vertikal · Kartoffelroder · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kehrmaschine · Keilramme · Klimaschrank · Knüppelschere · Kolbenkompressor · Kompressoren · Koordinatenbohrwerk · Kopfdrehmaschine · Kragarm- Regal · Krananlage · Krantraverse · Kreiselegge · Kreissägeblätter · Kurbelwellenschleifmaschine · Kühlmittelanlage · Kühlschmierstoffaufbereitungsanlage · Langdrehautomat · Langhobelmaschine - Doppelständer · Laserschneidmaschine · Lehrenbohrwerk - Vertikal · Leit- und Zugspindeldrehmaschine · LKW · Lokomotive - Diesel · Lynette · Magnetspannplatte · Manipulator · Messerkopf · Messplatte · Meßmittel · Meßwerkzeug · Motor · Nockenwellenschleifmaschine · Nuten-Stossmaschine · Nutenfräser · Ofen - Elektro · Ofen - Gas · Palettenregal · Planscheibe · Planschieber · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Plattenfeld · Portalfräsmaschine · Presse über 5.000 KN · Profilieranlage · Punktschweißmaschine · Radialbohrmaschine · Radlader · Regalsysteme · Richtpresse - Einständer · Roboter - Handling · Rohrbiegemaschine · Rollenbahn · Rundschleifmaschine · Rundtisch · Rübensämaschine · Schleifmaschinen · Schmiedehammer · Schmiedemaschine · Schmiedepresse - Doppelständer · Schraubenkompressor · Schraubstock · Schubladenschrank · Schubladenschränke · Schwader · Schweißanlage · Schweißplatte · Schweißtisch · Schwerdrehmaschine · Schwerlastanhänger · Setzstock · Sondermaschine · Sonstige · Spannmittel · Spanntisch · Späneförderer · Stanzautomat - Einständer · Stanzautomat-Einständer · Stromaggregat · Ständerbohrmaschine · Säulenschwenkkran · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Teleskoplader · Temperiergerät · Tieflader · Tieflochbohrmaschine · Tischbohrwerk · Traktor · Tuschierpresse · Türenschrank · Universal-Fräs- und Bohrmaschine · Universal-Fräs- und Bohrwerk · Viersäulenpresse - Hydraulisch · Vierwalzen - Blechbiegemaschine · Walzendrehmaschine · Wandschwenkkran · Wasserstrahlschneidanlage · Wendespanner · Werkbänke · Werkzeug Voreinstellgerät · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugschränke · Winkelkopf · Wärmeofen · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradprüfmaschine · Zahnradschleifmaschine · Zentriermaschine · Zentrierspitze · Zubehör · Zugmaschine · Ölnebel-Abscheider ·
          компендіум
          Софтвер
          Вміст старих машин
          Конфіденційність
          Слідкуйте за нами!
          © 2000 - 2024, Logotech oHG · Програмне забезпечення та Інтернет-послуги - Всі права захищені