Lathes

WORKING RANGE TURNING / ︱- swing diameter (max) 520 mm︱- turning diameter (max) 260 mm︱- worpiece length max. 1500 mm︱MAIN SPINDLE ︱- spindle bore diameter 78 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 78 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱- pitch of spindle 6 mm︱TAILSTOCK ︱- sleeve diameter 68 mm︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS ︱

---

turning diameter over bed 760 mm︱turning diameter over slide rest 540 mm︱turning length / mm︱ / ︱ 760 mm︱ 540 mm︱ 115 mm︱ ︱ 10 /min︱ 1000 /min︱ 12 ︱ 11 kW︱ ︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 ︱ ︱ 85 mm︱

---

turning diameter over bed 660 mm︱turning diameter over slide rest 438 mm︱turning length / mm︱ ︱ 660 mm︱ 438 mm︱ 85 mm︱ ︱ 15 /min︱ 1500 /min︱ 12 ︱ 11 kW︱ ︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 ︱ ︱ 85 mm︱

---

turning diameter over bed 430 mm︱turning diameter over slide rest 215 mm︱turning length 760 mm︱ ︱ 430 mm︱ 215 mm︱ ︱ 58 mm︱ 20 /min︱ 2000 /min︱ 12 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

WORKING RANGE TURNING ︱- swing diameter (max) 470 mm︱- turning diameter (max) 235 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 690 mm︱MAIN SPINDLE ︱- spindle bore diameter 58 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 58 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱TAILSTOCK ︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS ︱

---

<< Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws

turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN ︱ ︱ 660 mm︱ 400 mm︱ ︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 ︱ 18.8 kW︱ 21000 Nm︱ ︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱

---

Year 1979 Retrofit 2013 ︱max. turning diameter 1300 mm︱table diameter 1000 mm︱workpiece height max. 1500 mm︱working lenght 1050 mm︱ 280 U/min.︱T-slots 48 x 28 ︱speeds 4,75 - 250 U/min︱rapid traverse 6000 mm/min︱

---

In our opinion, the machine is in good used condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 ***Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well as Subject to prior sale!***

faceplate diameter 6300 mm︱swing diameter 14400 mm︱turning height 5080 mm︱Control Siemsn 840C ︱total power requirement kW︱weight of the machine ca. 400 t︱dimensions of the machine ca. m︱

---

faceplate diameter 6300 mm︱swing diameter 1720 - 14400 mm︱turning height 5080 mm︱max. ram stroke 2500 mm︱workpiece weight 240 t︱control Siemens 840C ︱x-travel 4300 mm︱z-travel 2500 mm︱cross rail - adjustment 3300 mm︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱

---

CNC retrofit in 1994, machine has CNC indexing and a universal milling and drilling drive that it can drill and mill on any angle and is equipped with: - CNC Control Siemens 840C - Table drive motor = Siemens 150 Hp, 500/2000 RPM, - Table positioning for drilling & tapping, with table brake. - Table encoder = Heidenhain ROD 800 (36,000 pulse per rev). - Planetary / Hydraulic milling & drilling head, 22 kW, - Chip conveyor - I beam support spider on table (1,400 mm height), with jaws, to allow under job support to 10,800 mm. The machine table turns, and head column & ram moves too – X & Y axis.